冲击磨损

Si对高强度高韧性贝氏体钢冲击磨损性能的影响

Effect of Silicon on Impact Wear Behavior of High Strength and High Toughness Bainitic Steels

激光熔覆涂层中TiCp界面结构与涂层冲击磨损性能

TiC_p Interfacial structure and impact wear resistance of TiC p / Ni coating by laser cladding

WCp/Mn13表面复合材料的制备及其冲击磨损性能

Fabrication and Impact Wear Resistance of WC_p / Mn13 Surface Composites

结果表明，复合材料具有良好的抗冲击磨损性能。当WC的质量分数在20%~30%时冲击磨损性能最好。

The result shows : that the impact resistance of the composite materials is better when WC % are 20 % 30 % in composites materials .

研究了碳含量（质量分数，下同）为025%，含Si量分别为034%和145%的两种高强度贝氏体钢的冲击磨损行为。

The impact wear behavior of two high tensile strength bainitic steels with carbon content of 0 25 % and silicon content of 0 34 % and 1.45 % , respectively , has been investigated .

去离子水介质下，AZ91D镁合金冲击磨损表现出疲劳剥层与腐蚀侵蚀的相互促进机制。

In de-ionized water , the wear mechanism showed as the mutual accelerating of fatigue delamination and corrosion .

本文利用冲击磨损实验机，扫描电镜，X射线衍射仪等仪器观察与分析了Ni－P（Ce）及Ni－Cu－P（Ce）镀层在冲击磨损过程中的磨损现象。

The behavior of the impact wear of Ni P ( Ce ) and Ni Cu P ( Ce ) coatings prepared by brush plating was investigated by impact wear test machine , scanning electron microscopy , X ray diffraction .

通过对NiP（非晶态）、NiCuP（晶态）涂层所做的冲击磨损实验，借助于扫描电子显微镜的形貌分析，较深入地探讨了电刷镀涂层在冲击状态下的行为。

Two samples of brush plated coatings with Ni Cu P and Ni P , respectively , are experimentally investigated on a impact wear test rig and the SEM is used to analyze their surfacial morphology before and after impact .

利用改造后的MLD-10型冲击磨损试验机研究了3种冶金矿山湿磨衬板钢在铁矿石酸性矿浆中的冲击腐蚀磨损行为；

The impact corrosion and abrasion behavior of three steels used as the liner of wet-grinders in acidic-ironstone slurry and at an impact energy of 2.7 J was investigated using a modified impact corrosive test rig .

抗冲击磨损堆焊合金的组织与性能

Structure and Properties of Austenitic Alloy of Impact Wear-resistance for Surfacing

中锰铸态耐磨钢的冲击磨损性能

Wear Property of Medium Manganese Cast Wear-Resistant Steel under Impact Load

奥氏体合金堆焊金属抗冲击磨损特性分析

Shock Resistance Wearing Property Analysis of Austenitic Alloy Overlaying Welded Metals

模具材料的高温滑动冲击磨损过程的电镜观察

Scanning electron microscope observation of high temperature slide-impact wear of die steel

离心铸造对白口铁抗冲击磨损性能的影响

Influence of Centrifugal Casting on Abrasion Resistance of White Iron

用颗粒冲击磨损试验评价热喷涂陶瓷涂层的粒子间结合

Evaluation of the Lamellar Bonding of Ceramic Coating by Particle Erosive Test

合金元素对抗冲击磨损堆焊材料性能的影响

Effect of Alloy Elements on Properties of Impact Wear-resistant of Hardfacing Material

基于力学性能变化的纤维冲击磨损测试仪

An impact abrasion tester based on mechanical change of fibers

提高钨合金白口铸铁抗冲击磨损能力的研究

Research on Fracture Toughness and Wear-resisting Properties of W-alloying White Cast Iron

金属冲击磨损实时检测系统的研究

Study in real time testing system for metal impact ware

高钒高速钢冲击磨损性能与机理的研究

Impact Wear and Wear Mechanism Study of High Vanadium High Speed Steel

碳化钨增强高锰钢基复合材料冲击磨损性能的研究

Impact Abrasive Wear Resistance of WC Reinforced High Manganese Steel Matrix Composites

淬火-配分-回火工艺处理钢的三体冲击磨损性能研究

Study on three-body impact-abrasion of steel treated by quenching-partitioning-tempering process

冲击磨损中合金结构钢的组织结构变化

Microstructural Changes of Alloy Constructional Steel in Impact Wear

稀土元素对软氮化层抗冲击磨损性能的影响

The Effect of Rare Earth Elements on Impact Wear-Resistance of Soft Nitriding Layer

对马氏体细晶粒高强度钢的冲击磨损性能进行了研究。

Study on Impact Wear Properties of Composite Layer with Tungsten and Chromium ;

高铬铸铁铸渗层的冲击磨损性能研究

A Study on impact wear of Cast-penetrated layer of high chromium cast iron

接触应力状态对材料冲击磨损特性的影响

Influence of stress state on impact wear of steel

腐蚀条件下中碳合金钢冲击磨损特性及机理

Impact Wear Characteristics and Mechanism of Medium Carbon Alloy Steel on Corrosive Condition

铬钢在模拟矿浆中受冲击磨损时的腐蚀行为

Corrosion behaviors of chrome steel during impact and abrasion in simulative mineral slurry

钢筋混凝土结构冲击磨损问题试验研究

Test study of collision wear of reinforced concrete structure