内锥

V型内锥式流量计的应用前景

The Application Outlook of V - cone Flow Meter

对应用于机车制动系统的V型内锥式流量传感器进行了理论分析和试验研究。

This paper introduced the theory analyzing and test researching of the V type internal cone flow transducer applied in locomotive braking system .

基于V形内锥式节流装置测量高炉煤气的研究

Study of V-cone throttle device in detecting blast furnace coal gas

这对V形内锥式流量传感器的设计和制造有一定的促进作用。

This can promote the design and manufacture of V-Cone flow sensor .

V型内锥式流量计

V-shaped inner conical flow meter

基于UG的内锥齿轮三维参数化建模

3D Parametric Modeling of Internal Bevel Gear Based on UG

文章阐述了V型内锥式流量计的基本特点和流量计量原理，并通过计算实例介绍了内锥尺寸和能耗的确定方法。

With real cases calculating , the method to determine the inner cone size and the energy loss is described .

V型内锥式流量传感器采用差压式流量测量方式。与传统差压式流量传感器相同，其基本原理建立在伯努利方程上；

As a differential pressure ( DP ) type flowmeter , the basic theory of the V-cone is Bernoulli 's equation , which is similar to traditional DP flow sensors .

带内锥的轴对称进口方形分离器的数值研究基于DGS对称开口谐振环的低通滤波器设计

Numerical Simulation of Axisymmetric Inlets Square Separator ; Symmetrical Split-Ring Resonator DGS for Lowpass Filter Design

通过计算实例的比较和对V形内锥（VNZ）节流装置作用机理的分析，证明了推广应用VNZ流量计的必要性。

By comparison of two examples and analysis of the operation mechanism for VNZ flow device , the necessity of popularizing VNZ flow meters is presented .

对冲头有、无内锥两种形式挤压过程进行数值模拟，利用罗德系数、J2应力偏量不变量等特征量进行变形分区，并利用7050铝合金进行挤压试验验证。

Numerical simulations on extrusion process with and without the inner cone punch were carried out , and the division of deformation was proposed by employing the characteristic quantity such as Lode parameter and invariant of the deviator ( J_2 ) .

通过单因素试验确定了合适的出种孔孔径及内锥筒转速范围，通过正交试验确定最佳的出种效果在出种孔直径3.2mm、出种孔倾角15。

The proper diameter of seed holes and rotating speed of the inner cone was determined through the single-factor experiments . The orthogonal experiments show the best results .

介绍了新一代的差压式流量计&V型内锥式（VNZ）流量计的工作原理、结构、整机系统组成及主要技术指标和性能，对它的优缺点进行了分析研究。

The article introduces the new generation of differential pressure flow meter & V shaped inner conical flow meter ( VNZ ), including its working principle , construction , composition of measuring system , main specifications and technical features .

带内锥冲头挤压过程中金属变形流动行为研究

Study of Metal Flow Behavior during Extruding with Inner Cone Punch

其结构主要是增设了内锥和倒锥。

The structure is added within the cone and inverted cone .

重点介绍了内锥流量计的各项特性与技术指标，并与标准孔板流量计作了比对，说明内锥流量计优于标准孔板。

Various characteristics and specifications of inner flowmeter are described in detail .

不同压力下内锥流量传感器压力损失系数的数值模拟研究

Numerical Simulation about Pressure Loss Coefficient for Inner-cone Flowmeter at Different Pressure

双联内锥齿轮和圆柱齿轮传动研究

Study of the transmission of two-side internal level gear and spur gear

简单介绍了内锥流量计的工作原理。

The operational principle of inner flowmeter is introduced briefly .

液压破碎锤内锥阀中流道流场的数值分析

A Numerical Analysis of Fluid Flow on the Poppet Valve Channel in Hydraulic Hammer

测量排气流量的内锥流量计数值模拟与实验

Numerical and Experimental Study on V-cone Flowmeter for the Vehicle Exhaust Gas Flow Measurement

内锥流量计的仿真与实验研究

V-Cone Flowmeter 's Numerical and Experimental Study

双联内锥齿轮和圆柱外齿轮传动的齿面方程的推导

The Ascertaining of the Formulas of Tooth Surface of Transmission of Two-sides Bevel Gear-Spur Gear

上游单90°弯头对内锥流量计性能的影响

Effects of Upstream Pipe Single 90 ° Elbow on the Performance Characteristics of Cone Flowmeters

尝试内锥螺纹的数控加工

Numerical control of inside tapered thread

内锥流量计的探讨

Investigation on Inner Cone Flowmeter

单弯头安装条件对内锥流量计性能影响的仿真研究

Simulation Investigation on the Effect of Single Elbow Installation Requirement for the Performance Characteristics of Cone Flowmeters

提出了基于三维方程的内锥齿轮和外锥齿轮三维实体精确建模的原理和方法。

The principles and methods for accuracy modeling of the internal and external helical bevel gears are proposed .

首次采用重组气溶素蛋白分离血液内锥虫。

It was first time that the recombinant aerolysin protein was used to isolate fish trypanosomes from blood .

上下游闸阀对内锥流量计性能影响的实验研究下行（水）进闸时间

Experimental research on the impact of upstream and downstream gate valves on the performance characteristics of a V-cone flow meter