光整加工

用所开发的CNC系统进行试验研究，结果表明磁粒光整加工能大大降低模具表面粗糙度。

The result of experiment with the devised CNC system shows that magnetic abrasive finishing can greatly reduce the surface roughness .

针对大型模具曲面光整加工问题，探讨采用磁力研磨加工模具曲面的工艺。

The technology of the magnetic abrasive finishing ( MAF ) was discussed to finish the curve surface of the large mould .

Air（初三适用）旋涡气流光整加工的机理分析

Mechanism analysis of swirling air stream finishing

金属快速原型表面NC光整加工

The Surface NC Finishing for Metal Rapid Prototype

实验证明，该工艺应用于V形槽表面的光整加工是成功的。

V shape is finished by PECF result in that PECF is suitable to the finishing of V shape 's surface .

磨料流加工（AFM）是光整加工领域的一项新技术。

Abrasive flow machining ( AFM ) is a nontraditional finishing technology used to improve surface quality of machining part .

结果表明，齿轮经电化学机械光整加工后，在保持原精度等级基础上，表面质量明显改善，表面轮廓平均算术偏差Ra可以降至0.2μm以下。

Results showed that , the gear surface machined with electrochemical mechanical finishing process was remarkably improved with a roughness Ra lower than 0.2 μ m.

根据Navier-Stokes方程和流体流动的连续性方程，建立了砂轮约束磨粒喷射精密光整加工中砂轮与工件楔形接触区流体动压力的三维数学模型；

The three-dimensional hydrodynamic pressure model of wedge-like zone between wheel and workpiece on abrasive jet finishing with wheel as restraint was established based on Navier-Stokes and continuity equations .

最后，开发出能同时适用于ELID磨削与MAF的复杂曲面光整加工控制与补偿软件。

Finally , A control and compensation software was developed and might be used to ELID grinding and MAF process for complex surface machining .

对脉冲电化学光整加工（PEFM）中所采用的一种电解液的伏安特性进行了实验研究。

The volt ampere properties of electrolyte in pulse electrochemical finish machining ( PEFM ) are investigated in this paper .

由于软性磨粒流的有效光整加工是在湍流状态下进行的，因此介绍了几种充分发展的湍流模型（标准k-ε模型、RNGk-ε模型和Realizablek-ε模型）。

The effective finishing of " soft " abrasive flow is under the condition of turbulence . Several fully developed turbulence models ( standard k - ε model , RNG k - ε model and Realizable k - ε model ) are introduced .

在本文中，提出了一种新型的光整加工方法&电化学机械复合光整加工（ECEF），并详细的论述了其加工原理。

In this paper , a new finishing machining method - Electrochemical Mechanical Finishing ( ECEF ) is put forward , and the mechanism of ECEF is explained in detail .

根据脉冲电化学光整加工PECM工艺需要大功率、窄脉宽、高频率电源的这一特殊要求，以绝缘栅极双极晶体管IGBT为主控元件设计了一种高频脉冲加工电源。

According to the demands of pulse electrochemical machining ( PECM ) in high frequency , narrow pulse width , and high power supply , a type of high-frequency pulse supply is designed based on IGBT ( Isolation Gate Bipolar Transistor ) .

以LL480QB型柴油机为实验研究对象，选定17种摩擦副零件，分类制定了光整加工工艺。

Taking a LL480QB diesel engine as the general researching object , 17 kinds of parts with frication pairs were chosen , and the surface finishing processes were worked out in sorts .

脉冲电化学光整加工的机理及影响因素

On the Mechanism and Influencing Factors of Pulse Electrochemical Polishing Process

用磁性磨料对钢领进行光整加工的研究

Research on the Super Finish Machining Steel Ring with Magnetic Abrasive

2344模具钢的脉冲电化学复合光整加工试验研究

Experimental study on pulse electrochemical mechanical finishing of 2344 die steel

汽车车身模具电化学超精密光整加工的研究

On Super Precision Polishing of Automobile Body Mould with Electrochemical Method

纳米磁性液体材料在光整加工中的应用研究

Research on the Application of Nano-structure Magnetic Liquid Material in Polishing

脉冲电化学齿轮光整加工电源设计与研究

Design and study of pulse power supply for electrochemical gear finishing

大长径比传动轴的光整加工工艺装备

The Equipment for Precision Process of Big Length-radius Proportion Transmission Shafts

新型的复杂曲面磁粒光整加工机床

New kind of machine tool for magnetic abrasive finishing complex surface

周期叉指阵中的指间多次反射问题脉冲电化学光整加工的流场及间隙特性

On characteristics of flow-field and interelectrode gap in pulse electrochemical finishing

面向光整加工的液体磁性磨具的研究与开发

Research and Development of the Liquid-Magnetic Abrasive Tool for Finishing Treatment

用动磨头对不规则表面进行光整加工的模式构想

Imagination of Finishing Mode for Irregular Surface with Grinding Head

异形长径比孔腔的光整加工

Finish machining Manufacturing of the Large Length diameter Ratio Special Shaped Hole

脉冲电化学齿轮齿面光整加工实验研究

Experimental Study on Pulse Electrochemical Finishing of Gear Teeth Surface

脉冲电化学碳钢表面光整加工技术实验研究

Experimental study of carbon steel surface finished by pulse electrochemical finishing technology

脉冲电化学机械复合光整加工模型的建立

Built the model for pulse electrochemistry - machine compound polishing

电解超声复合锉削在模具型腔光整加工中的应用

An application of the electrolyte ultrasonic complex file in Polish model formation