与力

采用虚拟现实（VR）技术，对视觉通道、听觉通道、触觉与力反馈、用户的输入、语音识别与合成等人机交互技术进行了研究。

Virtual reality technology is used in the study of the man machine interaction such as vision channel , hearing channel , feeling and force feedback , inputting of user and sound identifying and composing .

轮系机构计算机运动与力分析及其运动设计

The Computer Aided Kinematics and Mechanics Analysis and Kinematic Design of Gear Trains

参照系的选择与力的功值

Chosen Consulting System and Force Value

电力电磁场与力场耦合仿真系统的开发

Development of Simulation System for ADSS

这使得力以及与力相关紧密的场成为格式塔理论的重要范畴。

Consequently , forces and fields which keep intimate connection with forces become major categories of Gestalt Aesthetics .

应用传递矩阵法与力法给出了一种简便实用的标高灵敏度矩阵与负荷灵敏度矩阵的计算方法。

A new method to get elevation sensitivity matrix and load sensitivity matrix is presented . The transfer matrix and force methods are used .

同时，基于视觉与力觉混合控制技术，以微小轴孔零件装配任务为研究目标，进行了微装配试验，并取得较好效果。

At the same time , based on the hybrid control of micro-vision and micro-force feedback , a task of pin in hole was completed and good results were gained .

竞技能力非线性系统理论与力方法是竞技能力系统在运动训练实践中的现实规律性体现和反映。

Theory and Method of athletic ability nonlinear system is athletic ability system in practice of sports training practical laws embody and reflect , which has important practical significance in the process of its formation and development .

抗剪参数cφ与应力状态的关系及工程应用

Relation between shear parameters c φ and stress state and its application in engineering

前列腺素E1与氨力农治疗肺动脉高压疗效比较

Comparison of effectiveness of prostaglandin E_1 and amrinone on hypoxic pulmonary hypertension in pigs

基于PLC与三维力控组态技术的太阳能热水工程监控系统

Auto-control and On-line Monitoring System of Solar Water Project Based on PLC and PC-auto

循环荷载作用下H型钢柱的应变累积与承载力试验研究

Experimental Study of Strain Cumulation and Bearing Capacity of I - section Steel Column Under Cyclic Loads

FRP结构螺栓接点的预紧力与应力松弛

Pretightening force and stress relaxation of FRP construction bolt joint

研究了工业纯铁、Al合金、低碳锰钢三种材料的断裂时间与应力、温度的关系。

The relation between fracture lifetime , stress and temperature was investigated of pure iron , low-carbon manganese steel and Al alloy .

表达短lef-1dsRNA的转化细胞对家蚕核型多角体病毒的抗性核盘菌中dsRNA种类及其与致病力的关系

Resistance to BmNPV of Transformation Cells Expressing Short lef-1 dsRNA

InSb纳米颗粒的制备与原子力显微镜

InSb Nano-pellet Preparation and the Atomic Force Microscope

在帕萨特B5轿车布线图的基础上改画成该车防抱死制动系统（ABS）与牵引力控制系统（TCS）电路原理图；

The circuit schematic diagrams of the ABS and TCS of PASSAT B5 are drawn based on its wiring diagram .

应用有限元软件Ansys，对某铁水脱硫喷枪的工作温度场与应力场进行动态仿真，显示喷枪在一次工作循环条件下热应力的动态分布。

The working body temperature field and stresses field of desulfurizing lance has been dynamically simulated with the finite element software Ansys to show the dynamic thermal stresses distribution within lance in a duty cycle .

导电架触端高度与接触力的模拟结果用计算机程序FAST（Fahrleitung-Stromabnehmer）在时速直至360km/h的情况下得到。

Simulation results of a pantograph shoe height and the contact force are produced with the computer program FAST ( Fahrleitung-Stromabnehmer ) for velocities up to 360 Km / h.

初步探讨了以3D习Sic在拉伸过程中的电阻变化，电阻变化曲线与应力应变曲线趋势大致吻合，表明可用材料的电阻变化作为损伤变量来表征材料的损伤。

Electrical resistance variance of 3D-C / SiC in tensile process was simply studied and found electrical resistance vary curves have the same changing tendency with stress-strain curves and the result show that the electrical resistance variance can be used to characterize the material damage .

将该方法应用于工业SO2污染控制研究。案例研究表明，某镇建筑陶瓷业造成的SO2污染压力分布与承载力分布状况非常不均衡，导致该镇SO2年均浓度超过国家环境空气质量二级标准。

The method was applied to analyze industrial sulfur dioxide pollution control methods in a town in southern China where the local annual average concentration of SO__2 exceeds the second level of the national ambient air quality standard .

DSC曲线显示：Fe-Cu过饱和固溶体有两个宽的放热峰，第一个峰与应力释放对应，第二个峰对应固溶体分解。

DSC traces indicate that there exist two broad exothermal peaks for all samples , the first peak responds to the releasing of stored strain and the second to the decomposition of solid solutions .

高强度Al-Cu-Mg-Si合金的双级时效与应力腐蚀行为

Stress corrosion cracking behavior and two-step aging of high strength al-cu-mg-si alloy

并应用SAR图象处理，分析了SAR系统无限分辨力与有限力的概念，SAR距离及方位有限分辨力系统的频域表示为一等价的偏移窗口的二维滤波。

The concepts of infinite and finite resolutions of the SAR systems are analyzed . The finite resolution both in range and azimuth direction is incorporated via a theoretical analysis which results in a simple Fourier transform representation of an equivalent " offset " window filter .

T2值可能客观的反映椎间盘髓核的退变特征，体现T2值与应力方向和解剖部位的相关性。

The T2 values maybe objectively reflect the feature of the degeneration pertaining to the nucleus pulposus of intervertebral disc , and impersonated correlation that of the T2 values with the anatomic site and the stress force direction . 4 .

在深入研究三维有限元仿真分析理论的基础上，针对外掺MgO混凝土的特点，参与开发研制了一套能仿真外掺MgO添加剂的大体积混凝土结构温度场与应力场的分析程序。

The simulated analysis theory of three dimension FEM was deeply studied . According to the characteristic of MgO concrete , a simulated analysis program that can analyze the thermal field and stress field in the mass concrete with MgO admixture was developed by the author together with others .

利用Deform软件，对液压锁缸体的成形过程进行模拟，研究变形过程中的金属流动速度场与应力应变情况，分析了挤压过程的压力行程曲线，为工艺改进和优化模具设计提供理论依据。

This paper utilizes the deform-3d to simulate extrusion process for cylinder of hydraulic pressure lock . It studies the dummy velocity field of the forming metal and describes the stress and strain of metal . It also analyses the loading curve in deforming process .

这种方法效率低，花费大量的人力与物力。

This method needs a lot of material resources and manpower .

华南晚元古代&三叠纪构造事件与应力场

Tectonic event and stress field of late PROTEROZOIC-TRIASSIC in South China

12%Cr钢的组织与应力松弛性能

The Microstructure and Stress Ralaxation Property of 12 % Cr Steel