不锈钢线材

不锈钢线材的快速除鳞（RED）工艺

Rapid electrolytic descaling process for stainless steel wire rods

加入WTO后，中国的不锈钢线材及其制品市场与亚太地区市场及世界市场密不可分。

After entering into WTO , the Chinese stainless steel wire rods and rod products market are closely related to the Asia and Pacific market and world market .

勾花护栏网采用国家优质低碳镀锌钢丝、PVC包塑钢丝、不锈钢线材、铝合金丝钩编而成。

Chain Link Fence the use of national high-quality low carbon galvanized steel wire , PVC bag steel wire , stainless steel wire , aluminum alloy wire crochet made .

在多道次拉拔不锈钢线材过程中，用模拟表面横裂的方法，通过试验和FEM分析，研究凹形、U形、V形裂纹缺陷的生长和消除。

To study growth and remove of concave , U and V shape crack defect using the method simulating transversal crack with test and FEM analysis in the course of multi-pass drawing stainless steel wire rod .

火花激发原子发射光谱法应用于直径小于8mm的不锈钢线材的分析，对此类试样应用了一种特制的夹具，用块状标准样品制作工作曲线。

Atomic emission spectrometry with spark discharge excitation was applied to the analysis of samples of stainless steel wires with diameter smaller than 8 mm . A specially designed clamping apparatus was used for such samples .

探讨了用火花发射光谱分析不锈钢线材的试验技术。

An experimental method for analyzing stainless steel wire using SSAES is discussed .

高强度无磁不锈钢线材的开发

The Development of the High Strength Non-mag net ism Stainless Steel Wire and Rod

火花激发原子发射光谱分析不锈钢线材

Atomic emission spectrometric analysis of stainless steel wires

2010年前，国内对不锈钢线材的需求仍会有稳步增长。

Up to 2010 , the requirements for stainless steel wire rods are on the increase in China .

2002年，以大连钢铁集团和太原钢铁公司为主的不锈钢线材产品将满足国内市场需求。

In 2002 , the output of stainless steel wire rod at Dalian and Taiyuan will meet the demand of domestic market .

完善的检测手段可以生产各种规格的不锈钢线材棒材角钢扁钢六角方异型材等不锈钢制品。

Improved detection methods can produce various specifications of the stainless steel rods bars angle flat hexagonal side heterosexual wood products such as stainless steel .

从2002年起，以大钢和太钢为主的不锈钢线材产品将满足国内市场对高线生产的不锈钢线材的需求。

It will fast specialize the making of stainless steel wire rods . After 2002 , stainless steel wire rods from Dalian and Taiyuan will meet the needs of domestic market .

随着社会发展，企业对不锈钢线材的需求量急剧增加，由于能直接使用的大都是不锈钢异型线材，为此要对不锈钢线材进行深加工，以得到所需规格的各种异型线材。

Along with social development , business to wire stainless steel demand has risen sharply , but the direct used was mostly the special-shaped stainless steel wire . So it is need to make deep processing in order to obtain the required specifications of various special-shaped stainless steel wire .

研究了国产仿YUS110及进口SUS316L两类静电除尘器不锈钢星形线材的显微组织、静拉伸性能与疲劳特性。

The microstructures and the tensile and fatigue properties of the domestic YUS110 and the imported SUS316L stainless steel wire rods were studied .

太钢不锈钢棒线材业务发展战略研究

Development Strategic Research of Stainless Steel Wire Rod Business of TISCO

304不锈钢棒线材热连轧温度场的数值模拟

Numerical Simulation of Temperature Field of 304 Stainless Steel Rod and Wire Hot Continuous Rolling

本文系统地研究了太钢不锈钢棒线材业务发展战略，首先，对本文的研究背景、研究方法、研究内容以及框架等内容进行了详细地阐述。

This thesis studied systematically the development strategy of Tisco stainless steel wire rod and bar .

实测了304不锈钢棒线材18道次热连轧过程各道次的表面温度。

The surface temperatures of 304 stainless steel wire and rod during 18 passes hot continuous rolling process was measured .

对304不锈钢棒线材18道次热连轧过程的温度场、应力场及应变场进行了数值模拟。

The temperature field , stress field and strain field of 304 stainless steel wire and rod during 18 passes hot continuous rolling process were calculated .

详细分析了轴承钢、碳素钢和不锈钢棒线材轧制过程中轧件内部温度和微观组织的演变情况。

The comparisons show the validity of simulation results . 2 . The paper analyzes the evolutions of macroscopic and microscopic field-variables in the rolled pieces during the rolling processes of bearing steel , carbon steel and stainless steel rods and wires in detail .

利用数值仿真技术建立平-立轧制三维热力耦合有限元模型，对304不锈钢棒线材热连轧过程粗轧6道次实际工况进行仿真计算。

A 3-D thermal-mechanical coupled FE model for horizontal-vertical rolling process was established by the aid of numerical simulation method . 6 passes rough rolling mill of rod and wire hot continuous rolling process of 304 stainless steel was simulated and the actual rolling parameters was taken into account .

采用连续管线成型及填料技术制备MgB2/Nb／Cu／不锈钢复合超导线材

Fabrication of MgBi / Nb / Cu / stainless steel composite superconducting wire by continuous tube forming & filling processes

DN1系列点焊机广泛应用于工业生产中低碳钢板、不锈钢板、线材，银触头及大部分有色金属的焊接。

DN and DN1 series marsh welders are widely used in the welding of low carbon steel strip , corrosion resistant plate , wires , silver contact and lots of non-ferrous metals .