轻型载货汽车

  • 网络Light truck;Lorry
轻型载货汽车轻型载货汽车
  1. Air(初三适用)五十铃轻型载货汽车的空调系统

    Air Condition System of Isuzu Light Duty Truck

  2. 一些更大的轻型载货汽车和SUV,像雪佛兰HHR,看起来就好像他们用轮胎打气泵和注入大量附属品弄成的夸张样。

    Some of the bigger " light trucks " and SUVs , like the Chevrolet HHR , look as if they have been inflated with tyre pumps and injected with large quantities of lard .

  3. 利用前后置处理软件MSC/PATRAN(V8.5)和有限元求解器MSC/PATRANADVANCED-FEA(V8.5)能够对轻型载货汽车钢板弹簧的模拟方式进行若干情况的分析和比较,得出能较好模拟真实结构的建模方式。

    With the preprocessing and post-processing software MSC / PATRAN ( V8.5 ) and the FEM solver MSC / PATRAN ADVANCED-FEA ( V8.5 ), different models can be analyzed and compared , then the better models which can rationally simulate the actual structure can be obtained .

  4. 轻型载货汽车半轴疲劳寿命预测

    Forecast of Fatigue Life of Light Truck Driving Half Shaft

  5. 轻型载货汽车动力性能虚拟试验研究

    Study of Virtual Test of Dynamic Performance for Light Truck

  6. 康铃轻型载货汽车行驶系主要部件设计研究

    Research on Mainly Part Design of Run System of KangLing Light Truck

  7. 轻型载货汽车车架动态特性分析与研究

    Research and analysis on dynamic characteristics of light truck

  8. 采用单轴激振法对改善轻型载货汽车平顺性的研究

    Study of Light Truck Riding Stability Improvement with Single Axle Exciting Vibration Method

  9. 轻型载货汽车车架的动力特性分析

    The Dynamic Characteristic Analysis of the Light Truck Frame

  10. 轻型载货汽车传动系参数的优化

    Optimization of Transmission System Parameters of Light Truck

  11. 轻型载货汽车车外噪声分析与控制

    Analysis and Control of Light-Duty Truck Exterior Noise

  12. 轻型载货汽车的发展在汽车工业中起着很重要的作用,在能源、交通等基础行业中更是不可替代。

    And the development of light-duty trucks also plays important role in the development of auto industry .

  13. 根据被试轻型载货汽车车外主要噪声源的特性合理地选择吸声、隔声材料和噪声控制方案,对其进行了降噪处理。

    The exterior noise of the light-duty truck is reduced through choosing reasonable sound absorption , insulation materials and noise control methods .

  14. 为了改进某轻型载货汽车车架的结构,对边梁式车架进行了一定的简化。

    For the sake of improving the structure of certain typed light truck frame , certain simplification has been made on side girder typed truck frame .

  15. 基于排放约束的轻型载货汽车动力传动系匹配不同排放法规阶段轻型汽油车排放控制技术特征

    A Study on Powertrain Matching of LDT under the Constraint of Exhaust Emission ; The Features of Emissions Control Technology of Light-duty Gasoline Vehicles in Different Regulation Stages

  16. 根据对中国轻型载货汽车未来发展趋势和所面临的环境政策的分析,提出了保持中国轻型载货汽车行业健康稳定发展的对策建议。

    This paper also sets forth the proposals to maintain sound stable development of light-duty vehicle industry , based on the analysis of future trend and current condition policies .

  17. 采用通用模架结构,设计出解放系列轻型载货汽车的系列纵梁成型模,并对传统结构进行了一些改进。

    A forming die for frame serial side rails of Jie fang light truck series is designed by using a common die bed and some traditional constructions have been improved .

  18. 介绍了利用UG/NX软件对汽车驱动桥壳进行参数化设计的方法,并针对某轻型载货汽车驱动桥壳建立了动力学模型。

    Parameterization design method for drive axle housing with UG / NX software is introduced , and the dynamic model of the axle housing of a light truck is created .

  19. 以某轻型载货汽车的驾驶室翻转机构为例,简要地阐述轻型载货汽车驾驶室翻转机构的结构特点、工作原理和设计方法以及其优、缺点。

    The principle and design method of the cab tilting mechanism together with the advantage and disadvantage has been pointed out in this paper by a type of light-truck cab as an example .

  20. 目前就国内的情况来说,事故率高、事故伤害大而又在碰撞安全方面投入研究极少的车型是各种载货汽车,特别是轻型载货汽车。

    According to domestic situation , we can find that the truck , especially the light-duty truck has a higher accident rate and damage , but there is little research on crashworthiness of the truck .

  21. 中轻型柴油载货汽车在发展农村公路运输中的重要性和必要性

    The Importance of Light Diesel Trucks in Country Transportation