激光刻蚀

C（60）薄膜的准分子激光刻蚀及形貌分析

Excimer Ultraviolet Laser Ablation of C_ ( 60 ) Films and Its Morphology Analysis

XRD谱显示，激光刻蚀不会引起BSCFO相结构的变化。

XRD patterns show that the BSCFO phase structure is kept after laser ablation treatment .

铁电材料激光刻蚀系统中的PID微机控制技术

PID Control Technology in the Laser Etching System for Ferroelectric Materials

激光刻蚀sol-GelTiO2薄膜的浸润性研究

Study on Wettability of Sol-gel TiO_2 Film Ablated by Laser

激光刻蚀制备集成型a-Si太阳电池的一些问题

Some Problems in Fabricating Integrated a-Si Solar Cell with Laser Scriber

主要描述了紫外准分子激光刻蚀聚酰亚胺（polyimide，PI）制作微图案实验。

In the paper , the experiment with UV excimer laser etching PI for micropatterns is described in detail .

激光刻蚀成模快速制作PDMS微流控芯片

Fast Fabrication of PDMS Microfluidic Chip by Replica Molding of LASER Ablated Model

激光刻蚀制备银胶及其SERS应用利用激光刻蚀技术制备化学纯银胶，所用光源为Nd：YAG脉冲激光器。

Third , the preparation of laser-ablated silver colloids and its application as SERS substrates .

报道了准分子XeCl（308nm）紫外激光刻蚀C60膜的实验研究及对刻蚀薄膜的形貌分析。

In this paper , experimental study on excimer XeCl ( 308 nm ) ultraviolet laser ablation of C60 films and their morphology analysis are reported .

激光刻蚀硅磁敏三极管发射区引线槽的研究

Study on Laser Etching emitter Region-groove Approach of Magnetic-Sensitive Silicon Transistor

基于激光刻蚀技术石英晶振频率微调系统的设计

Design of quartz crystal resonator frequency trimming system based on laser-engraving

提出了一种基于激光刻蚀路径的修调电阻精度控制方法。

A precision control method based on laser trimming path was introduced .

激光刻蚀硅表面的形貌及其对浸润性的影响

Effect of Topography on Wettability of Pulse Laser - Ablated Si Surface

激光刻蚀与化学腐蚀结合法制备量子线（点）结构

Quantum wire ( dot ) prepared by combination of laser and chemical etching

紫外激光刻蚀多层线路板初步研究

Ablation of Circuit Board by Pulsed UV Laser

脉冲激光刻蚀聚苯乙烯的蓝光发射

Blue Emission of Pulsed Laser - ablated PS

图像处理技术在表晶音叉片激光刻蚀微调中的应用

Application of Image Processing in Laser Engraving Fine Tuning of Watch Crystal Fork Resonator

纳秒激光刻蚀玻璃基质铬薄膜直写微光栅结构

Fabrication of Micro-grating Structures by Nanosecond Laser Ablation of Chrome Film on Glass Substrate

激光刻蚀法网格化热释电红外焦平面探测器的实验研究

The Study of Reticulating IRFPA by Laser Etching

紫外激光刻蚀氧化锆陶瓷初步研究

Etching of ZrO_2 ceramic with UV laser ablation

因此，利用激光刻蚀表面方法可以在一定程度上调控固体表面的润湿性能。

Accordingly , the certain-extent-controllable wettability of solid surface can be prepared by laser ablation .

利用激光刻蚀和化学刻蚀的方法制备一种可视化微通道。

We made a visual micro channel by the laser etching and chemical etching technique .

脉冲紫外激光刻蚀聚合物薄膜的发射光谱和形貌学研究

Ultraviolet laser ablation and etching polymer film

紫外激光刻蚀聚酰亚胺

Etching of Polyimide by UV laser

最后利用仿真验证了激光刻蚀螺旋臂实现正交馈电的可行性。

Finally , the simulation showed the feasibility of laser etching spiral arms for orthogonal feed . 3 .

聚乙烯吡咯烷酮和聚乙烯咔唑的表面增强拉曼光谱研究及激光刻蚀金属胶体的制备

A Study on PVP and PVK by Surface Enhanced Raman Spectra and the Preparation of Metal Colloids by Laser Ablation

采用激光刻蚀的均质微观孔隙模型对低渗透油气藏岩心进行了气水两相渗流试验。

A series of gas-water two-phase flow experiments in low permeability cores were conducted by using laser etched microscopic pore model .

方法：以42颗离体上颌双尖牙作为研究标本，对其唇面牙釉质表面分别进行不同能量的激光刻蚀和37%磷酸刻蚀处理，同时模拟光固化治疗。

Methods : The labial surfaces of 42 isolated maxillary premolars were etched with laser and 37 % phosphoric acid respectively .

通过试验摸索出了一种有效的准分子激光刻蚀玻璃材料的工艺方法，成功地在玻璃片上进行了刻蚀试验；

After analyzing the results of the above mentioned experiments , a new process etching glass micro-spheres with 248 nm excimer laser was introduced , and successfully carried out in lab experiments .

本文采用简易的实验装置，用自行研制的三种结构掩膜进行了准分子激光刻蚀实验，得到了50μm深的聚合物材料微机械构件。

Three kinds of mask structure are etched by using excimer laser and simple equipment . The polymer micro machine components with depth of 50 μ m have been fabricated after experiment .