改性剂

  • 网络Modifier;ACR;CPE
改性剂改性剂
  1. 冲击改性剂在PC和PC/ABS合金中的应用

    The Application of Impact Modifier in PC and PC / ABS Alloy

  2. 加入反应性改性剂F,则明显提高拒水效果。

    Also , the water resistant capacity can be greatly increased by adding reactive modifier F.

  3. 我国PVC抗冲击改性剂的生产及市场概况

    Outlook of domestic production and market of impact modifiers for PVC

  4. 丙烯酸酯类抗冲击改性剂(AIM)树脂是一类新型的PVC改性剂。

    Acrylic impact modifiers ( AIM ) resin is a new type of PVC modifier .

  5. PVC抗冲击改性剂和加工改性剂的发展状况

    The impact and additive modifier for PVC and its advances

  6. PVC抗冲改性剂-MBS树脂的生产技术及市场前景

    Production and Market Prospect of PVC Impact Modifier MBS Resin

  7. 界面改性剂及硫酸钙晶须对PP复合材料结晶性能的影响

    Effects of Interface Modifier and CaSO_4 Whisker on the Crystallinity of PP Composite

  8. 我国PVC抗冲改性剂的发展现状

    Development of Impact Modifiers for PVC in Our Country

  9. PVC抗冲改性剂及其进展

    The Impact Modifier for PVC and Its Advances

  10. SEAM是一种新型的沥青改性剂,同时也是一种沥青混合料添加剂。

    SEAM is a new-type asphalt modifier and also an additive used in asphalt mixture .

  11. 一种PVC耐热改性剂的研究

    Study on a PVC heat resistant modifier

  12. 采用聚合度为1300的PVC树脂为基体树脂,与高分子改性剂、增塑剂、填充剂等共混研制了软质PVC密封条的粒料。

    By blending the PVC of polymerization degree 1300 with polymeric modifier and plasticizer , etc.

  13. 通过研究分离电压、背景电解质和电渗流改性剂的浓度、pH的影响优化了分析条件。

    The influences of pH , separation voltage , and concentrations of electroosmotic flow modifier , CTAB and background electrolyte were investigated .

  14. 对缓冲溶液的组成及pH值、电渗流改性剂的浓度以及分离电压等条件进行了研究。

    The components and pH of the buffer solution , the concentration of osmotic flow modifier and the separation voltage were investigated .

  15. ACR改性剂对硬质PVC焊接强度的影响

    Influence of acrylic modifiers on welding strength of rigid PVC

  16. 这种鉴定方法同样适用于AC中其他无标准图谱的改性剂分析。

    The method can be extended to analyze other additives in AC blowing agent system whose various standard spectra are absent .

  17. 利用上述改性剂对SiC粉体进行表面改性,制备了表面含有羧酸基团的改性粉体。

    It was coated on the surface of SiC powders . Modified SiC powders with anhydride were prepared .

  18. 硬质PVC门窗异型材用聚丙烯酸类(ACR)抗冲击改性剂

    Acrylic Impact Modifier for R-PVC Door and Window Profiles

  19. 同时考察了SBS改性剂的加入量与改性效果的关系。

    The relationship between content of SBS modifier and modified effect was also investigated .

  20. SBS改性剂与其它聚合物改性剂的比较;

    The mechanism of SBS ; the comparison of SBS with other polymer modifier ;

  21. 加入2%的抗冲改性剂可以提高玻璃纤维增强ABS复合材料的冲击强度。

    Adding 2 % anti-impact modifier can strengthen the impact stress of GF / ABS composite reinforced .

  22. 此外,本实验还讨论了缓冲溶液的pH值、浓度及有机改性剂对有效成分迁移行为的影响。

    In addition , the effects of buffer pH value , concentration and organic modifier on the migration behavior of the solutes were also investigated .

  23. 研究了加工改性剂、热稳定剂和润滑剂等对PVC防护栏表面光滑度的影响。

    Influences of processing modifier , heat stabilizer and lubricant on the surface glossy degree of PVC protective gratings were studied .

  24. 研究了DA改性剂的种类、用量对酚醛树脂残碳率的影响,并用扫描电镜观察和分析了改性酚醛树脂的成碳结构。

    The effect of category and quantity of DA modifiers on the char yield of phenolic resins was studied .

  25. 一种新型环氧树脂流变改性剂&纳米SiO2

    A novel rheological modifier of epoxy resins-nano silica

  26. 改性剂对PA6树脂末端氨基含量的影响

    Influence of additives on the content of amino end group of PA 6 resin

  27. 介绍了国内外PVC抗冲击改性剂和加工改性剂的状况和技术进展。

    The situation and advances of impact and additive modifier for PVC at home and abroad have been introduced in the paper .

  28. 本文对纤维素纤维改性剂CM的合成及其应用性能进行了研究,得到了最佳轧烘焙改性工艺及活性染料染色工艺。

    An optimal process of padding & Curing modification and reactive dyeing is conducted based on the synthesis and application researches of modifier CM .

  29. 聚丙烯的新型抗冲击改性剂POE

    The New Impact Modifier POE for Polypropylene

  30. 透明PVC本文介绍了改性剂MBS的生产方法及其在中的应用。

    This article gives an introduction on both application and Manufacture of impact modifier MBS for transparent polyvinyl chloride .