插针

介绍了由PLC构成的光纤接口陶瓷插针同轴数控磨床数控系统的设计及其实现，并在实际生产中得到了应用，达到了预期的目标。

The design and its realization of CNC system of co_axial grinding machine for ceramic contact pin of optical fiber interface configured by PLC is introduced . It is applied in practical production and has reached predetermined target .

插针外径自动测量分选系统的研制

Development on the Automatic Diameter Measurement and Fraction System of Contact Pin

陶瓷PC型光纤活动连接器中二氧化锆插针体材料制备研究

Material Preparation of Zirconia Ceramic Ferrule for PC Type of Fiber Optical Connector

因此当插针插入后，将产生n个接触点或接触段。

It results that when the needle is inserted in the socket n point contacts or n segment contacts will take place .

本文对陶瓷PC型光纤活动连接器的关键部件二氧化锆插针体的材料配方，材料成型，材料烧结工艺进行了详细的研究。

This paper reports the detailed investigations on the composition , shaping process and material sintering of zirconia ceramic ferrule for PC type of fiber optic connectors .

陶瓷插针是制作光纤连接器的关键器件，其市场需求正随着波分复用技术（WDM）的广泛应用而不断地扩大。

Ceramic ferrule is a key part for manufacturing optical fiber connectors . Its demand is steadily increasing with the development of WDM technology .

为了获得高质量的陶瓷烧结体，采用部分稳定氧化锆（PSZ）作为插针材料。

Partially stabilized zirconia has been used as the ferrule material in order to acquire sintering body with high performance .

通过研究和试验，图像处理应用最优阈值和动态阈值的方法分割陶瓷插针的CCD图像，提取陶瓷插针的边缘，用邻域平均的方法去除噪声；

By the research and tests , this thesis applies the best threshold and dynamic threshold methods to divide the CCD images , pick-up the edge of ceramic ferrules , using the adjacent-field average method to get rid of noise .

所有的绿色插针是我想去的地方。

And all the green ones are where I want to go .

全自动光纤插针同心度检测分类仪的研制

The Development of Fiber Ferrule Concentricity of Automatic Detection and Classification Instrument

双排插针，折弯，检测。

Double row pin loader , bender , test .

我宁愿在我眼睛里插针。

I 'd rather stick needles in my eyes .

GB/T9952-1988数据通信15插针DTE/DCE接口连接器和插针分配

Data communication & 15 pin DTE / DCE interface connector and pin assignments

请勿触摸插针、导线或电路。

Avoid touching pins , leads , or circuitry .

光纤插针三维形貌检测中的干涉图像处理

Interferential image process in the measuring of surface topography for fiber ferrule end-face

若与超出插针深度容差的连接器匹配，则可能会损坏连接器。

Mating connectors with out of tolerance pin depths may destroy the connector .

基于图像检测技术的光纤插针内孔几何参数测量仪

Fiber ferrule inner hole geometry parameter measuring instrument based on image detection technology

（裁缝）用来插针的一小块硬垫子。

A small stiff cushion into which pins are stuck ready for use .

请在匹配连接器之前检查插针深度。

Verify pin depth before mating connectors .

光纤连接器用氧化锆陶瓷插针

Zirconia Ferrule for Connecting Optical Fiber

GB/T9950-1988数据通信37插针及9插针DTE/DCE接口连接器和插针分配

Data communication & 37 pin and 9 pin DTE / DCE interface connectors and pin assignments

此兼容设备有两个耳机插针及一个用于录音的语音输入插针。

The device has two headphone jacks as well as an audio input jack for recording .

插针快速敏捷检测系统的研究与开发

The Research and Development on the Contact Pitch Inspection System Based on Rapid Agile Metrology for Manufacturing

插针采用固定构造，完全不用加油，无污染，无维护成本。

The inserting pin with fixed structure which does not need oiling is pollution free and maintenance free .

文章以该插针工艺为研究主体，涵盖了线路板应力分析和工艺参数的优化过程。

The paper studies this pin technology and covers the analysis of printed circuit board strain and process parameters optimization .

密封凸台：密封凸台是用软橡胶制成的可密封每一根插针。

Sealing convex platform : sealing convex platform is made of soft rubber , and used to seal each pin .

本文首次报导光电器件金属化耦合封装用全金属化光纤插针；

The tully metallized optical fiber insert pin for metallized coupling package of optoelectronic devices is reported for the first time .

为了测量光纤插针内孔的几何参数，研制了一种基于图像检测技术的非接触式光纤插针内孔几何参数测量系统。

A non-contact measuring instrument based on image detection technology is developed to measure the fiber ferrule inner hole geometry parameter .

文中介绍了大线破损、漏电、插针镀层脱落及被牲畜啃咬的修复方法。

The paper offered the reparation methods for damaged cable , leakage of electricity , stripping of film and bite by animal .

文章介绍了插针压接工艺过程的技术要求及质量分析，提出了检验压接的基本方法。

This paper introduces the technical requirements and quality analysis of the process of press-fit pin , proposed basic method for press-fit test .