康铜

铜-康铜热电偶的热镀锡膜工艺和测温特性分析稳压特性-对NTC热敏电阻器

Hot Tinning Process of Copper-constantan Thermocouples and Thermometric Characteristics Analysis

以康铜、镍不同厚度的薄膜，陶瓷Al2O3基组成微电子组件模型，在热载作用下，通过试验观察到薄膜在界面处的分层和屈曲失效。

The film / substrate systems which are made of Ni-Cu , Ni films , Al2O3 ceramic substrate are delaminating and buckling under thermal loading .

给出了三种形式的铜康铜传感器的结构参数和一定实验条件下的Vp响应关系。

It also presents the construction parameters for three combined types of sensors and their V - p curves under the experimental conditions , which show that there principally exists a linear dependence in the pressure range .

本文改进了一种二维锰铜&康铜环型拉氏量计，测量了雷管内部二维冲击起爆（SDT）流场；

The2D initiation flow in a detonator is measured using an improved2D composite manganin-constantan ring gauge .

选用优质康铜材料，传统工艺，可靠性强。

Constantan use high-quality materials , traditional crafts , and reliability .

提出一种制作铜-康铜热电偶的新方法：锡膜焊接法。

Tinfoil welding technique was employed to make copper - constantan thermocouples .

铜-康铜热电偶的锡膜焊接及热电特性

Tinfoil Welding of Copper - constantan Thermocouples and Calibration

试验工况的温度场是采用66根铜&康铜热电偶测得。

The temperature field of the two conditions is measured with 66 copper-constantan thermocouples .

铜-康铜热电偶参考端温度补偿器

A copper-constantan thermocouple reference junction temperature compensator

铜-康铜微细热电偶丝的光纤激光微细焊接技术

Fiber Laser Micro-Welding of Cu-CuNi Fine Thermocouple

GB/T6149-1985新康铜电阻合金

New constantan resistance alloy

在该杜瓦瓶夹层中放有八个铜-康铜热偶温度计，提供了有关屏温分布的参考数据。

Eight copper-constantan thermocouples are set between the inner and outer walls and give the data of the temperature gradients over the shields .

用热线风速仪、铜&康铜热电偶分别测量出不同送风量下的室内各个测点的速度和温度。

We used anemometers and copper constantan thermocouple respectively to measure velocities and temperatures of all measuring points under various air volumes within the room .

首次将新型锰铜-康铜复合拉氏压力传感器用于二维轴对称冲击波起爆过程的压力测量，为二维实验的推广铺平了道路。

Manganin-constantan compound Lagrange gauge is originally used in two - dimensional axisymmetric experiment , which paves a wide road for popularization of two-dimensional experiment .

本文描述了一种利用桥路补偿法，采用热敏电阻作感温元件制成的铜&康铜热电偶参考端温度补偿器。

A copper-constantan thermocouple reference junction temperature compensator which is based on the compensating brige method and in which a thermistor is used as the temperature sensitive element is descr - ibed .

其原理是在康铜基体上镀一层铜膜，从而形成一个铜－康铜表面薄膜热电偶，通过测定水平埋管表面的瞬时温度来计算出瞬态换热系数。

One end face of the cylinder is electroplated with a copper film to form a fast response copper-constantan sur-face thin-film thermocouple for the measurement of the instantaneous surface temperature of the gauge .

文中阐述了一套以微机、数字化示波仪、分散式数据采集器、特制微型硅二极管温度计及铜一康铜热电偶为核心的自动化测温系统。

In this paper , an automatic measurement system , including a computer , digital scopes , isolated data collector , miniature diode thermometer made specially and Cu - constantan thermo - couple , is expounded .

通过实验研究了干锯切花岗石过程中金刚石节块花岗石接触界面的温度特性，并用康铜纯铁薄膜热电偶在线测量了磨削弧区的温度响应。

An experimental investigation is reported of the temperature feature at the contact zone in the dry sawing of granites with the diamond segmented saw . The temperature responses in the cutting zone are measured by using a sandwiched foil thermocouple .

方法采用铜-康铜热电偶温度传感器，利用呼吸气流对传感器温度的改变，将温度变化转换为电压信号，经放大处理，获得呼吸频率曲线。

Methods Using copper-constantan thermocouple as the temperature sensor , the change of the temperature on the respiratory tract vent can be transformed into voltage signals . By means of the treatment of amplifier the breath frequency curve of infant can be recorded .