发送器

fā sònɡ qì
  • transmitter;transducer
发送器发送器
  1. 0.25μMCMOS千兆以太网发送器设计

    Design of a Gigabit Ethernet Transmitter using 0.25 μ m CMOS Technology

  2. 用VHDL设计通用异步接收/发送器

    Use VHDL to Design Universal Asynchronous Receiver & Transmitter

  3. 在本文所使用的拓扑中,两个put队列管理器的集群发送器通道都指向对方。

    In the topology used in this article , the cluster sender channels of both put queue managers will point to each other .

  4. 本文提供的可下载的存档文件含有适配器、业务应用程序、发送器和BusinessEvents对象。

    The downloadable archives provided with this article contain the adapter , the enterprise application , the sender , and the Business Events project .

  5. 就像在其他XML集成项目中一样,发送器和接收器需要使用通用的模式。

    As with any XML integration project , both the sender and the receiver need to agree upon a common schema .

  6. 介绍了近几年来国内外工业pH分析仪及其传感发送器、电极的发展概况,列举了一些典型产品的性能特点。

    S The developing survey of industrial pH analyzer at home and abroad in recent years and its electrode are introduced .

  7. 基于VHDL语言的全双工异步接收发送器电路设计

    Circult Design of Full Duplex UART Base on VHDL

  8. 灵活的传输框架:Axis提供了一个传输框架,这个传输框架可以帮助您创建自己的可插式传输发送器和传输侦听器。

    Flexible Transport Framework : Axis provides a transport framework that helps you create your own pluggable transport senders and transport listeners .

  9. 透过内建的FM发送器在家中的音响无线播放音乐。

    Play your music on your home stereo over the air with the integrated FM transmitter .

  10. SDH接收/发送器是用于SDH光网络的重要器件。

    SDH Receiver / Sender is one of the most important parts of SDH Fiber Optic Network .

  11. 具有SPI接口的数字式同步发送器设计

    Design of digital synchronizer transmitter with SPI interface

  12. 介绍了一种采用深亚微米CMOS工艺实现单片集成发送器的设计。

    The design of a monolithic integrated transmitter , which is implemented in deep sub micro CMOS process , is described .

  13. 本文描述了一种基于PCI总线的高级在轨系统(AOS)帧同步信号发送器的设计与实现。

    This paper particularly describes the design & implementation of AOS Synchronous Transmitter based on the PCI Bus .

  14. 文章主要介绍一个通用异步接收器∕发送器(UART)核的设计。

    This paper presents a design of a universal asynchronous receiver and transmitter ( UART ) .

  15. 顾名思义,这个协议是在IP多播之上构建的;在IP多播中,一个发送器可以发送一条消息并使多个接收器接收到该消息。

    As the name implies , it is built on top of IP multicast , in which one transmitter can send one message and have it be received by more than one receiver .

  16. 0.18μMCMOS工艺3.125Gb/s发送器的设计

    3.125Gb/s Transmitter with 0.18 μ m CMOS Process

  17. 对RF发送器来讲效率主要由功放(PA)的效率决定。

    For RF transmitter circuits , the efficiency is largely determined by the efficiency of the power amp ( always abbreviated as " PA " in RF discussions ) .

  18. 这是我做UART时候做的一个发送器的源码,希望对大家有用。

    This is what I did do a UART transmitter when the source and hope for all of us .

  19. 基于OpenLDI标准提出了应用于LCD显示控制器的接口电路&LVDS发送器的结构。

    The LVDS transmitter used as LCD controller interface is presented based on the OpenLDI Standard .

  20. 平台提供了TCL扩展接口,测试者可以通过接口动态控制SDH过程,实现对SDH接收/发送器的自动化测试。

    The bench provides TCL extended interface , so the testers can control the SDH process dynamically , and implement the automatic testing for SDH Receiver / Sender .

  21. 如果您在消息体中使用XML进行数据交换,最佳实践建议您执行XMLSCHEMA(XSD)验证,以确保发送器和接收器使用相同的语言。

    If you use XML for data exchange in the message body , best practices recommend that you perform XML Schema ( XSD ) validation to ensure that the sender and receiver speak the same language .

  22. 设计WesSphereMQ集群的另一个关键注意事项是,要确保所有存储库彼此间具有通过集群发送器通道的通信路径。

    A key consideration in the design of a WebSphere MQ cluster is ensuring that all of the repositories have a communication pathway to each other through cluster sender channels .

  23. 在具体实现上,本文给出了UART的各个模块的详细设计,包括:发送器、接收器、波特率发生器、同步先进先出缓存(FIFO:FirstinFirstout)、Modem控制模块、接口模块。

    In practice , this paper gives a detailed design implementation of various UART modules including reciever / transmitter , baud-rate generator , synchronous FIFO ( First In First Out ), Modem control module , interface module .

  24. 提出了一种正交频分复用(OFDM)信号发送器的模型和设计方法,并用该装置在一个室内环境中进行实验测量,寻找合适的OFDM参数。

    A model and a complete design methodology of OFDM transmitter for power line communication are proposed . Some experimental measurements have been performed in residential environments to find proper physical layer parameters of PLC OFDM .

  25. 介绍一种采用直流24V集中供电的新型位置发送器。

    A new kind of position transmitter is introduced . The transmitters are powered by a centralized 24 VDC power supply .

  26. 基于HS-3282和CPLD的航空总线ARINC429接口,HS-3282芯片由2接收器和1发送器组成。

    The ARINC 429 bus is based on CPLD and HS-3282 . The HS-3382 consists of 2 receivers and 1 transporter .

  27. 分别设计了发送器中的GFSK、上混频和功率放大器电路。

    The circuits of GFSK , Up-conversion Mixer and Power Amplifier in the transmitter are designed respectively .

  28. 在简单介绍了MODEM的基本原理、Hayes标准、通用异步接收发送器(UART)后,以DOS环境下的MODEM通信功能实现为例,阐述了在远动系统中实现远程维护功能的关键技术。

    After simply introducing some knowledge about the fundamental principle of MODEM , Hayes standard and universal asynchronous transceiver ( UART ), this paper further discusses some important technology under DOS operation system to achieve remote maintenance in the remote terminal system .

  29. 下方列出了各个EVM的用户指南,协作运行接收器和发送器的操作指南也作为套件包含在每个用户指南中。

    User 's guide for each EVM is listed below , operating instructions for the Receiver and Transmitter operating to together is as a kit is also contained in each user 's guide .

  30. 发送器内使用多元双正交键控(MBOK)调制解调和扩展方案。

    The modu-lation and spreading scheme used in the proposed transceiver is M-ary bi-orthogonal keying ( MBOK ) .