陶瓷烧结

探讨了制备高强韧性、高耐磨自润滑微细孔结构的金属陶瓷烧结体的设计原则；

The designing principles of the micro-porous ceramic sinter with high-strength and toughness were discussed .

B2O3、P2O5对氟硅云母玻璃陶瓷烧结性能的影响

Effect of B_2O_3 and P_2O_5 on fluorosilicic mica glass-ceramic sintering process

氮化硅陶瓷烧结微结构演化的同步辐射CT实时研究

In Situ Observation of the Microstructure-evolution in Silicon Nitride Ceramics Sintering by Synchrotron Radiation X-ray Computed Tomography

纳米复合Ti（C，N）基陶瓷烧结晶粒长大的特性

Grain Growth Characteristics During Sintering of Nano-Composite Ti ( C , N ) - Based Cermet

纳米Al2O3/TiO2复相陶瓷烧结组织与性能研究

Study on Sintering Structure and Properties of Nano-Al_2O_3 / TiO_2 Ceramic Composite

ZnCr2O4陶瓷烧结反应机理的探究

On Chemical Reaction Mechanism of ZnCr_2O_4 Ceramic in Sintering Procedure

TiO2和MgO微量添加剂对Al2O3陶瓷烧结致密化的影响

Effect of TiO_2 and MgO Additions on Microstructures of Al_2O_3

Nb2O5-TiO2和Nb2O5-Ta2O5体系陶瓷烧结工艺及介电性能的研究

Study of the Process and Dielectric Properties of Nb_2O_5-TiO_2 and Nb_2O_5-Ta_2O_5 Ceramics

Nb2O5对氧化铝陶瓷烧结性能和显微结构的影响

Effect of Nb_2O_5 on sintering and microstructure of alumina ceramics

多孔SiC陶瓷烧结体的导电特性

Sintered Porous SiC Body and its Conductivity

原始粉末尺寸对Ti（C，N）基金属陶瓷烧结特性和组织结构的影响

Effect of initial powder size on the sintering characteristic and microstructure of Ti ( C , N ) - based cermet

陶瓷烧结的MonteCarloPotts模型及其比较研究

Compare of Two kinds of Monte Carlo Potts Models in ceramic sintering

YAG引入方式对碳化硅陶瓷烧结特性、力学性能及结构的影响

Effects of adding methods of YAG on sintering behaviour , mechanical properties and microstructure of SiC ceramic

Si3N4-MgO-CeO2陶瓷烧结中的致密化与自动析晶

Densification and Automation Crystallization during Sintering of Si_3N_4-MgO-CeO_2

Si3N4陶瓷烧结中烧结助剂的研究进展

Study on Sintering Additives for Silicon Nitride Ceramics

促进PZT压电陶瓷烧结的几条途径

Several Approaches to Improve Sintering of PZT Piezoelectric Ceramics

CaF2掺杂对ZnNb2O6陶瓷烧结行为及介电性能的影响

Effects of CaF_2 Addition on Sintering Behavior and Microwave Dielectric Properties of ZnNb_2O_6 Ceramics

纳米Ti（CN）基金属陶瓷烧结收缩和化学成分的变化

Evolvement of sintering shrinkage and chemical composition of millicron-Ti ( CN ) base cermets during sintering

Si3N4－MgO－CeO2陶瓷烧结过程中MgO的自动析晶

The automatic crystallization of MgO during the sintering of Si 3N 4 MgO CeO 2 ceramics

Y2O3和La2O3对B4C基陶瓷烧结致密化及其结构和性能的影响

Effects of Y_2O_3 and La_2O_3 on the Sintering Densification and Structure as well as Properties of B_4C Based Ceramics

AlN低温烧结助剂的研究现状锆英石多孔陶瓷烧结助剂的研究

Development of the Low-temperature Sintered Aids for AlN Ceramics

V2O5和Li2CO3共掺杂对Mg4Nb2O9陶瓷烧结行为及微波介电性能的影响

Effects of V_2O_5-Li_2CO_3 co-doped on the sintering behaviour and microwave dielectric properties of Mg_4Nb_2O_9 ceramics

用Sol-Gel法制备粉料及KTN陶瓷烧结研究

A Study of Atmosphere Sintering Technique for KTN Ceramics by Sol Gel Method

Ti（C，N）基金属陶瓷烧结过程的冶金基础及其显微组织特征Ⅱ芯-环结构的形成机理及烧结过程中的脱气演化

Metallurgical Reaction Foundation and Microstructural Characterization of Ti ( C , N ) - based Cermets Part ⅱ: Mechanism of Formation of Core-Rim Structure and Gas Evolution during Sintering

通过与ZnO陶瓷烧结过程的对比，揭示了Al2O3掺杂对烧结过程的影响。

The paper also reveals the influence of Al2O3 doping in the sintering process by way of comparing with the sintering process of ZnO chinaware .

认为添加氧化物的SiC陶瓷烧结属于液相参与下的烧结，烧成失重对致密化的影响十分重要。

And concludes that effect of firing weight loss on densification is very important because the sintering of SiC ceramics with oxide additives is liquid phase sintering .

ZAO陶瓷烧结模型的研究

Research on Sintering Model of ZAO Ceramics

液相添加剂对BaTiO3系无铅PTC陶瓷烧结温度的影响

Effect of sintering temperature of liquid additives on the batio_3-based lead-free PTC ceramics

中频感应炉用刚玉质干式捣打料烧结性的研究提高SiC陶瓷烧结用真空中频感应炉加热性能的试验研究

Study on sintering property of corundum based dry ramming mix for intermediate frequency induction furnace IMPROVEMENT ON THE HEATING PERFORMANCES OF VACUUM INDUCTION FURNACE FOR SINTERING SIC CERAMICS

SnO2-LiZnVO4系湿敏陶瓷烧结工艺与电性能关系的复阻抗分析

Complex Impedance Analysis for the Relationship of Calcining Process and Sensing Properties of SnO_2-LiZnVO_4 Humidity Ceramic