陶瓷材料
- 网络ceramic materials;transparent ceramics;Ceramic
-
复合陶瓷材料,并对其相结构、介电以及可调性和微波特性进行了研究。
In addition , bst-mt composite ceramics have higher tunability and better microwave .
-
Al2O3基高强度透气性陶瓷材料的研制
Permeable Ceramics of Al_2O_3 with High Strength
-
高Qm、低损耗压电陶瓷材料的研究
Study on High Qm , Low Dielectric Loss Piezoelectric Ceramics Materials
-
利用等静压技术制备牙科Al2O3/ZrO2陶瓷材料
Preparing of Al_2O3_ / ZrO_2 Composite Dental Ceramics through Isostatic Pressing Technology
-
常压烧结制备Al2O3/TiCN复合陶瓷材料
Preparation of al_2o_3 / ticn composites by normal pressure sintering
-
预氧化在SiC基陶瓷材料烧结中的作用
Effect of Pre-oxidation on Sintering of SiC Ceramic Materials
-
2种Y-TZP/Al2O3陶瓷材料的结构和磨料磨损性能比较研究
Comparative Study of Microstructures and Abrasive Wear-resistance of Two Y-TZP / Al_2O_3 Ceramics
-
Al2O3/TiB2/SiCw陶瓷材料的室温摩擦磨损特性研究
Study on the friction-wear behavior of al_2o_3 / tib_2 / sic_w ceramic composite at room temperature
-
Si/SiC先进陶瓷材料缺口蠕变损伤的试验研究
Investigation of Creep Damage for Si / SiC Advanced Ceramics on 4-point Bending Beam with Notch
-
掺杂对低压ZnO压敏陶瓷材料显微结构及性能的影响(3)
Effect of Doping on Microstructure and Electrical Properties of low voltage ZnO Varistors ( 3 )
-
TiB2和SiCw对Al2O3陶瓷材料高温摩擦磨损特性的影响
Effect of TiB_2 and SiC_w Additions on Friction and Wear Behaviors of Al_2O_3 Ceramic
-
用Na·β&Al2O3陶瓷材料为隔膜提纯金属钠的研究
The Method of purifying Sodium by using Ceramic Material Na ·β - Al_2O_3 as Diaphragm
-
SrxPb(1-x)TiO3基陶瓷材料热敏特性研究
Study on the Properties of Sr_xPb_ ( 1-x ) TiO_3-based Thermistors
-
Sol-Gel法制备全组分高温PTC陶瓷材料
Sol Gel Preparation of Full composition High Temperature PTC Ceramics
-
CVD法制备SiC先进陶瓷材料研究进展
Development of SiC Advanced Ceramics by CVD
-
掺杂PZT压电陶瓷材料的研制及其发展趋势
The Development of the Doped PZT Piezoelectric Ceramic Materials and Their Developing Trends
-
YAG光学功能陶瓷材料
YAG optical function ceramics
-
CVD法制备陶瓷材料的进展
Development of Making Ceramics with CVD Process
-
超细石英粉经热压成型(HP)制成红外陶瓷材料,工艺简单,原料成本低。
Infrared ceramics material is prepared using HP ultrafine quartz powder in a simple process and at low cost .
-
Si3O4基陶瓷材料高温腐蚀的动力学研究
Corrosion Kinetics of Si_3N_4-Based Ceramics at High Temperature
-
研究了采用钎焊方法,在空气加热炉中实现PTC陶瓷材料与铝合金的连接问题。
Brazing process between PTC ceramic and aluminium alloy within air heated furnace is studied .
-
链网模型与Si3N4陶瓷材料宏细观力学行为模拟
A chain network model simulating macro mechanical behavior and micro damage evolution of Si 3N 4 Ceramics
-
Al2O3/TiB2陶瓷材料的高温摩擦磨损特性研究
Study on the wear friction behavior of Al 2O 3 / tib 2 ceramic composite at elevated temperature
-
TiO2-V2O5-K2O系湿敏陶瓷材料的改性研究
The Study of Modification on TiO_2-V_2O_5-K_2O Series Humid-Sensing Ceramic Materials
-
利用EPMA和XRD的分析方法,研究了Si_3N_4-Al_2O_3-ZrO_2系陶瓷材料表面氧化层组成。
The composition of surface oxidation layer Of Si_3N_4-Al_2O_3-ZrO_2 ceramics has been investi-gated with EPMA and XRD .
-
采用热压法制备出三种Al2O3基复合陶瓷材料,用于陶瓷拉丝模的制作。
Al2O3-based ceramic composite is produced using hot pressing sintering , it can be used to manufacture wire drawing dies .
-
陶瓷材料Vickers硬度的压痕尺寸效应
Indentation size effect in Vickers hardness testing of ceramics
-
PZT(Mn,W)和PZT(Mg,W)系统铁电陶瓷材料相变的热物性研究
Studies on phase transition of ferroelectric ceramics of PZT ( mn , w ) and PZT ( mg , m ) systems by thermophysical method
-
透明PLZT电光陶瓷材料的制备及应用研究进展
Progress on the Fabrication and Applications of Transparent Electrooptic PLZT Ceramic Materials
-
在此基础上应用模糊层次综合评判和灰色聚类法对陶瓷材料的磨削加工性进行评价,并且通过面向对象的程序设计语言VB编制了应用软件。
On the basis of above results , the grindability of ceramics was evaluated by using fuzzy hierarchy comprehensive evaluation and grey cluster analysis methods .