反应烧结

主要研究了激光点火反应烧结NiAlCU系粉末材料的致密化机理。

The mechanisms for densification during laser ignited reaction sintering of Ni-Al-Cu powder materials were studied .

B4C陶瓷热压反应烧结及力学性能

Hot press reaction sintering and mechanical properties of boron carbide

以单质Si、C原料制备反应烧结碳化硅的研究

Study on the Preparation of Reaction Bonded Silicon Carbide With Silicon and Carbon

添加Al对无压反应烧结制备Ti3SiC2粉末的影响

Effect of Al Addition on Synthesis of Ti_3SiC_2 Powder by Pressureless Reactive Sintering

用Ti3SiC2粉料连接反应烧结SiC陶瓷

Joining of reaction bonded SiC ceramic using Ti_3SiC_2 powder as filler

高密度反应烧结SiC的耐化学腐蚀性能

Resistance to Chemical Corrosion of High Density Reaction - bonded SiC

成型工艺对反应烧结SiC材料性能的影响

Influence of Shaping Technology on Properties of Reaction Sinter Silicon Carbide

全碳素坯密度对反应烧结SiC的影响

Effects of Pure Carbon Green Density on Reaction-bonded Silicon Carbide

TiO2－Al－B系反应烧结制备的复相陶瓷和原位Al基复合材料

Fabrication of composite ceramics and in-situ aluminum based composite by reaction sinter from tio_2-al-b system

聚合物热解-反应烧结SiC的制备

Preparation of reaction sintered SiC via polymer pyrolysis

掺加SiC片晶对反应烧结SiC性能的影响

Effect of SiC Platelets Incorporation on Microstructure and Mechanical Properties of Reaction Bonded Silicon Carbide

MgO引入量对反应烧结ZrO2增韧Al2O3复相陶瓷性能的影响

Effect of MgO addition on properties of reaction-sintered ZrO_2-toughened Al_2O_3 multiphase ceramic

机械球磨与反应烧结合成Sr2CeO4发光体的研究

Synthesis of Sr_2CeO_4 Phosphor by Mechanical Milling and Reactive Sintering

反应烧结过程中，SiC、莫来石的生成反应滞后于锆英石的分解反应；

The decomposition of zircon carries out firstly compared with the formation of SiC and mullite .

反应烧结Si3N4的热震断裂行为

Behaviour of Thermal Shock Fracture for Reaction Sintered Si_3N_4 Materials

Si3N4/Al反应烧结制备AlN/Al复合材料

Fabrication of AlN / Al Composites by Si_3N_4 / Al Reaction Sintering

纳米Si3N4对反应烧结Si3N4结合SiC材料的影响

The effect of nano-Si_3N_4 on the sintering of Si_3N_4 reaction bonded SiC material

还原气氛下Al2O3-SiC-Si3N4复相材料的反应烧结过程

Sintering Process of Al_2O_3-SiC-Si_3N_4 Composites at Reduction Atmosphere

SPS反应烧结YAG陶瓷的显微研究

Study on Microstructure of YAG Ceramics Prepared by SPS

电致发热多孔陶瓷是以SiC为材质，利用反应烧结法制备而得的一种多孔陶瓷材料。

The electron-heating porous ceramic was prepared by reactive sintering which main raw is SiC and petrol coke .

研究了用锆英石、氧化铝和炭黑的混合物制备原位SiC颗料复合锆莫来石材料的反应烧结进程和显微结构特征。

The reaction - sintering mechanism and microstructure of zirconia-mullite ceramics with in situ SiC powder were investigated .

Y2O3对反应烧结制备Si3N4多孔陶瓷的影响

The Effect of Y_2O_3 on the Properties of Porous Si_3N_4 Ceramic Prepared by Reactive Sintering

结果表明：反应烧结SiC在1100℃的氧化动力学曲线符合抛物线规律；

The results show that the oxidation kinetics of reaction bonded silicon carbide follows parabolic law at 1100 ℃ .

高能球磨与反应烧结合成YAG∶Ce~（3+）荧光粉的研究

Synthesis of YAG ∶ Ce ~ ( 3 + ) Phosphor by High Energy Milling and Reactive Sintering

通过选择合适的烧结制度，利用热压反应烧结成功地制备了Ti3Al/TiC+Al2O3多元复合材料。

With proper sintering processes , Ti3Al / TiC + Al2O3 multi-composites were prepared successfully by hot-pressing reaction sintering .

反应烧结Si3N4陶瓷断裂韧性的实验研究

Fracture Toughness of Reaction Sintered Si_3N_4 Ceramics

与反应烧结SiC/纯Co体系进行对比，研究了Cr含量、实验温度和保温时间对润湿角的影响及活性元素的作用。

The effect of Cr content and technological parameters including wetting temperature and dwelling time on the wettability of the system was investigated .

大塑性变形-反应烧结TiAl合金的高温压缩屈服强度

Compressive Yield Strength of TiAl Alloy at Elevated Temperature

SPS反应烧结不同化学计量比硼-碳陶瓷

Preparation of Stoichiometric Boron-Carbon Ceramics by Spark Plasma Sintering

通过反应烧结锆英石、氧化铝和碳黑的混合物制备了原位SiC颗粒复合的锆莫来石材料并研究了烧结机理。

Mullite zirconia ceramics with in situ SiC powder were prepared by Reaction sintering process . The reaction sintering mechanism was studied .