钻削加工

钻削加工中进给方向毛刺生成机理的研究

A Study on the Leaned Burr Formation in Drilling process

模块对钻削加工参数选择和多孔工艺规划分别进行了优化，提高了多孔型模具的生产效率。

Drilling parameters and multi-hole process planning are also optimized by this system , which could effectively improve the efficiency of multi-hole-mould production .

多工位冲压模具设计基于PLC的多工位钻削加工控制系统

Design on the Processing Control System of Multi-work-location Drilling and Paring Based on PLC

Al2O3和C短纤维混杂增强铝基复合材料钻削加工性的研究

Investigation on drilling machinability of alumina and carbon short fibers reinforced aluminium alloy hybrid composites

基于PLC的钻削加工装置钻头自动循环控制电路的设计

The designing and producing of the automatic circulation circuit of the aiguille in the bore-cut precess equipment

Al2O（3f）+Cf/ZL109混杂复合材料钻削加工性的研究

Investigation on drilling machinability of al_2o_ ( 3f ) + c_f / zl109 Hybrid Composites

碳纤维复合材料（CFRP）钻削加工技术的研究

Study on the Drilling Technology of CFRP

ZrO2/CePO4可加工陶瓷材料钻削加工的试验研究

Experimental Investigation on Drilling Process for Machinable ZrO_2 / CePO_4

采用改进Hopfield方法结合孔群加工的最优化目标函数进行钻削加工中心路径的优化。

Adopting an improved Hopfield algorithm and holes machining route optimization functions , the center route was optimized in drilling and cutting process .

CeZrO2/CePO4复合陶瓷材料的钻削加工表面具有明显的塑性变形加工痕迹。

The cutability grades of Ce-ZrO_2 / CePO_4 composites increase with the proportions of CePO_4 . There were obvious ductile machining marks on Ce-ZrO_2 / CePO_4 composites drilling surfaces .

对Nd-Fe-B烧结永磁体材料的金刚石工具套料钻削加工进行了比较详细的研究。

The material removal mechanism and surface quality of drilling Nd-Fe-B ferrite magnetic materials with diamond tools have been experimentally investigated .

指出了采用厚膜CVD金刚石钻头进行高速钻削加工是获得高质量孔的良好方法。

It is pointed out that the high speed drilling by using the thick film CVD diamond drill is a good method to get high quality holes .

但是目前针对柔性板微孔机械钻孔尚未进行深入的研究，实际生产中还存在很多问题。因此非常有必要对FPCB微细孔钻削加工进行深入的研究。

Higher and stricter requirements about the quality of the micro hole machining will be needed actually . However , it has not yet in-depth research and there are a lot of problems in the process of production at the moment for flexible sheet micro holes mechanical drilling .

振动钻削加工过程监控系统中的扭矩传感器

On the Torque Sensor for a Monitoring System during Vibration Drilling

纸质材料深孔钻削加工工艺的探讨

A technique for deep hole drilling and cutting on paper materials

组合机床钻削加工刀具状态监控研究

Research on Tool Condition Monitoring in Drilling in Modular Machine Tool

麻花钻尖顶角对钻削加工的影响

Influence on drilling and choice of tip angle of twist drill

钻削加工切削参数的优化模具加工中的高速切削

Optimum of drilling parameter High-Speed Cutting in Die & Mold Manufacture

国内外钻削加工现状

The Present State of Drilling Machining at Home and Abroad

盲孔法测量残余应力的钻削加工应变

Drilling strains in measuring residual stress with hole-drilling strain-gage method

微孔钻削加工的钻削力监控

The drilling force monitoring in micro - hole drilling

对钻削加工而言这一问题更为严重。

And the problem is especially serious when drilling .

浅议新的钻削加工技术野猫子与卡门比较论

New Drilling Techniques THE COMPARISON BETWEEN WILDCAT AND CARMEN

孔加工刀具交换问题及后续优化深孔钻削加工刀具状态监测的研究

Tool switches optimization for drilling Investigation on Tool Condition Monitoring of Deep-hole Machining

金刚石工具钻削加工工程陶瓷孔的实验研究

Drilling Holes in Engineering Ceramics with Diamond Tool

复合材料厚板钻削加工工艺的研究

Study of technique in drilling thick composite laminates

智能轴承在钻削加工中的应用

Application of Bearings with Intellectual Ability to Drilling

超声钻削加工工具更换问题的探讨

Discussion on Replacement problem of ultrasonic Drilling Tools

浅析钻削加工刀具损伤

Simple explanation of damage for drilling tools

钻削加工应变对盲孔法测定焊接残余应力的影响

Effect of the induced drilling strain on the welding residual stress measurement by blind-hole method