配置图

介绍了矿井提升机PLC信号系统的特点，并以典型矿井为模型，探讨了该信号系统的功能层次结构图及其相应的设备配置图。

The property of PLC signal system of mine hoist is introduced . Taking typical mine for model , this paper has made exploration on structural diagram of function levels of this signal system and layout diagram of its appropriate equipment .

铁路站场配置图生成系统设计与实现

The Design and Realization of Railway Yard Layout Generating System

只需在一个图形工具中重新配置图中的变迁（transition）并重新部署，而不是花上好几个小时书写麻烦的企业部署描述符。

Just reconfigure transitions in a diagram graphically and redeploy instead of messing with enterprise deployment descriptors for a couple of hours .

通过RationalROSE分别绘制出用例图、类图、顺序图、活动图和配置图等。

Use case diagram , class diagram , sequence diagram , activity diagram and deployment diagram of the system are drew by using rational rose .

采用建模工具UML建立了系统需求模型、静态结构模型、动态行为模型及系统实现的组件图及配置图。

Use the UML , the system analysis module , static structure module , dynamic behavior module and the Implementation Diagram are drawn out .

建立物理模型：系统的物理模型，包括组件图（ComponentDiagram）和配置图（Deploymentdiagram），用来显示系统实现时的一些特性，包括源代码的静态结构和运行时刻的实现结构。

Building the physical model : The physical model of the system include component diagram and deployment diagram . They may show some characteristic when the system is being implemented .

在分析系统需求的基础上，给出了毕业设计管理系统的UML模型，包括Usecase图、交互图、对象类图、协同图和配置图。

A UML model of the Graduate Design Management System was presented , including Use case diagram , interaction diagram , object class diagram , cooperation diagram and configuration diagram , based on analyzing of system requirement .

讨论了选矿厂工艺设备配置图设计中CAD技术应用的三种主要方法，结果表明，参数化绘图是最有效的途径之一。

Three basic methods for application of CAD techniques in the engineering plotting of process equipment flowsheet arrangement in concentrator were discussed . As a result , it is shown that the parametrization plotting is one of the most effective ways .

研究了TPS系统在环氧树脂生产中的应用，构建了TPS系统在环氧树脂生产中的配置图，提出了系统的硬件组成和网络结构。

The application of TPS in the production of Epoxy Resin is researched in the article , Constructing the con-figure chart of Epoxy Resin in production process . Putting forward the systemic hardware constitute and net-work structure .

GB/T14085-1993信息处理系统计算机系统配置图符号及约定

Information processing systems & Computer system configuration diagram symbols and conventions

参照设备配置图且适当地进行电气接线。

Refer to the equipment configuration diagram and make electrical wiring properly ;

代用燃料汽车的零部件配置图

Allocation Chart of Parts and Components for SFV

组合列车采用条件的分析及区段站配置图的探讨

Analysis of the conditions about adopting combined train and Research on the layout plans of district stations

对选矿工艺设备配置图的有效描述及算法，是实现选矿厂计算机辅助配置设计的关键问题。

The key problems of the concentrator computer aided layout are how to carry out the effective demonstration and algorithm of the equipment layout of mineral processing .

下面所给出区域没有为走廊、墙壁或接待大厅留出空间，它们应在最终配置图中包含。

The areas given below do not include any allowances for corridors , walls or a general hall at reception which should be included in the final layout .

最后对系统进行详细设计，设计系统类图、顺序图、状态图、组件图、配置图。

Finally , the system detailed design , the design of the system class diagram , sequence diagram , state diagram , component diagram , and the configuration diagram .

给出了变径弯管的曲面方程、展开算法以及钢筋位置和长度计算方法，实现了变径弯管的结构图、展开图、钢筋配置图及受力钢筋成型图的计算机辅助绘制

Equation and algorithm of the development plan , the location and the length of reinforcing bar of variable-radius elbow pipes are provided Computer aided design and drawing of variable-radius elbow pipes is accomplished

构件设计类，运用设计类顺序图、类图来实现系统的设计模型：使用构件图、配置图来描述系统的实现模型。

Cooperation chart of analysis species to describe the analysis-model of system : to build design species , using design species sequence charts , species charts to realize design-model of system ; using component charts .

同时，为加强车站能力，建议对既有区段站适当改造并提出新配线结构的配置图，以协调点线能力。

This paper also suggests to reconstruct the existent district stations and presents the layout plans of the new construction of sidings so that the ability of the railway line and that of the stations can be cooperated .

分析用户要求及存在的客观原因，确立了设计原则、要实现的功能、软硬件平台的选择、系统原理图、网络结构图及系统配置图；

Then analyzes the requirement of the user and the existent objective problem and establish the design principle , the function modules , the selection of software and hardware platform , principal chart of system , network architecture and the Configuration of the Simulation System ;

对田间机器系统配置循环图绘制的研究

Research on Drawing Allocation Circulation Plan of Machinery System in Field

CloudBurst2.1管理映像的默认网络配置如图1所示。

The default network configuration of CloudBurst 2.1 management images is shown in Figure 1 .

为此，通过对田间机器系统配置循环图的绘制方法和原则进行了研究，从而大大提高了田间效率、节省了时间、降低了成本，有效地提高了农业机械的性能。

For this reason , with researching the method and principle of drawing , the led results are increasing the efficiency , saving time , reducing cost , improving the performance of agricultural machinery .

提出了矩阵变换器用的电力电子模块的配置结构图，它包括换向控制逻辑、过电流保护、确保安全运行和使用双向开关运行等问题。

The configuration of a power electronic building block for matrix converters is proposed . This includes the commutation control logic and the over-current protection , provides safe-operation and eliminates the problem of operating with bi-directional switches .

首先介绍基于民用照射源的被动雷达应用概况，给出了系统配置示意图，分析了调频广播信号作为雷达照射源的模糊函数和目标检测的二维相关算法。

Firstly the application of the civil illuminators based passive radar and its system configuration are introduced . The ambiguity function of the FM radio signal as a radar illuminator and the 2-D correlation algorithm in target detection are analyzed .

这些参数的值在MakeTransaction活动的DataMapping属性中配置，如图8中所示。

The values for these parameters are configured in the Data Mapping properties of the Make Transaction activity , as shown in Figure 8 .

这个Import针对一个本地队列管理器和一个本地队列进行配置（如图2所示）。

The Import was configured for the local queue manager and a local queue , as shown in Figure 2 .

继承自基础DocumentList控件的配置设置（图27）表明有一个条款指定了静态属性。

The configuration settings inherited from the base Document List control ( Figure 27 ) show that there is a provision to specify static properties .

它是一个建立在PDM基本框架之上，集产品结构与配置管理、图档管理、工艺卡片管理及编码管理为一体的实用系统。

On the discussion of the PDM basic frame , we establishes an integrated data management system which covers product structure and configuration , image , card processing and part coding .

在分析并确定了系统的控制参数后，设计了推杆式热处理连续炉生产过程和PLC控制系统，完成了系统配置和梯形图设计。

After the analysis and determination of the system control parameters , we establish the production process of Front axle continuous heat treatment furnace and temperature PLC control system , and complete the system configuration and ladder design .