速度控制系统

  • 网络speed control system;SCS
速度控制系统速度控制系统
  1. 驼峰推峰速度控制系统Fuzzy模型的研究

    A study of hump-yard locomotive speed control system with fuzzy model

  2. 应用于污水处理站的模糊自适应PID速度控制系统

    Fuzzy self-adaptive PID speed control system applied to waste water proceeding station

  3. 自适应模糊PID在脱硫搅拌速度控制系统中的应用

    The Application of Self-adaption Fuzzy PID in the Velocity Control System of Desulfuration-agitation

  4. 采用双CPU的混合式步进电动机速度控制系统

    Speed control system of hybrid stepping motor with dual CPU

  5. 本文提出了一种新型的AC速度控制系统&解耦变结构控制系统。

    A new AC speed control system-decoupling variable structure control system is proposed in this paper .

  6. 其次,利用MATRIX编制了冷连轧机速度控制系统的仿真软件,并与虚拟轧机的其它子系统和冷连轧机的设定级等相连,构成了整个冷连轧机轧制动态过程仿真系统。

    Next , the simulation software for speed control system and whole dynamic rolling process of tandem cold rolling mill is programmed using Matrix .

  7. PTFE推挤机速度控制系统研究

    The Research on Speed Control System of PTFE Extruder

  8. 本文论述了可编程控制器(PLC)和计算机技术对棒材生产线速度控制系统的技术改造及功能实现。

    This paper introduces how to improve and realize the speed control system of the continuous production line through the advanced PLC and computer technology .

  9. 针对阀控缸速度控制系统的不稳定状况,采用PID控制方式对系统进行校正,选择了适宜的PID参数。

    For the valve controlling cylinder speed control system is instability , used PID control method proofread the system , Choose a suitable PID parameters .

  10. 采用PLL的电机速度控制系统

    A PLL Motor Speed Control System

  11. 以交流永磁同步伺服电机速度控制系统为研究对象,阐述了1种PI控制器参数实时校正的方法。

    A new real-time auto-tuning method for PI controller has been introduced , taking permanent-magnet synchronous servo motor as the subject .

  12. 能量回馈式VVVF液压电梯速度控制系统研究

    Research on speed control system of VVVF hydraulic elevator with energy feedback

  13. 建立了气动伺服速度控制系统的控制方案,并在控制系统中引入模糊控制和PID控制策略。

    The control scheme of pneumatic servo speed control system is established , and the fuzzy control and PID control tactics also are introduced in the control system .

  14. 最后使用PID控制器对台车速度控制系统进行了校正,改善了系统的性能。

    At last , PID controller is used to rectify the speed controlling system of the car . As a result , the characteristic of the system is improved .

  15. 本文在对电梯现有的几种运行速度控制系统分析的基础上,提出了一种新的ADCM(AbsoluteDistanceControlModel)电梯速度控制系统,该系统大大优化了电梯速度控制的性能。

    Based on the analysis of the several lift running control systems , the thesis carries out a new ADCM ( Absolute Distance Control Model ) running control system for lift .

  16. CAPL炉内张力速度控制系统的研讨

    Discussion on the Tension and Speed Control System of CAPL

  17. 基于此,本文分析了Fuzzy-PID控制器的性能,并把它直用于精密冷辗机中的比例伺服速度控制系统。

    Based on detailed analysis to the response of Fuzzy - PID control , its appliance in proportional servo system of Cold Rolling / Forming Machines is represented .

  18. 用一种分量独立的PID控制器为反馈控制器克服近似逆系统误差和系统扰动,构成了异步电机复合速度控制系统。

    Then , with the approximate inverse-system as the feedforward-controller to solve the speed tracking problem and one component-independent PID-controller as the feedback-controller to overcome the errors of the approximate inverse-system and the disturbances , an induction motor compound control system is constructed .

  19. 本文以永磁同步电动机伺服系统的速度控制系统作为研究对象,系统地介绍了对比例-积分(PI)控制器的增益进行实时校正的调节方法。

    In this paper , a new and practical real-time gain-tuning method for proportional plus integral ( PI ) controllers has been introduced , using the speed control of a permanent-magnet synchronous motor drive system as a studied object .

  20. 提出了一种直接控制的自适应神经元模型和神经网络结构,以及一种快速学习算法(FLA),并把该神经网络和算法用于驼峰速度控制系统。

    A class of neural networks containing direct controlled adaptive neuron and the corresponding fast learning algorithm method are proposed for developing this new humping speed control system .

  21. 对造纸机可控硅速度控制系统的稳定性和可靠性进行了探讨,尤其对AEG公司的传动装置作了详尽阐述。

    The stability and reliability of thyristor speed control system in paper machine was discussed in this paper , AEC 's drive unit was especially introduced in detail .

  22. 本文分析了CAPL炉内张力速度控制系统的特点,提出系统进一步精调的方法和改善系统运行的措施。

    In this paper . we analysis the characteristic of tension and speed control system for CAPL The method of fine adjustment and the measure to improve operation state of system are presented .

  23. 单晶炉坩埚旋转速度控制系统设计

    Design of Rotational Speed Control System for Single Crystal Furnace Crucible

  24. 长气管气动马达速度控制系统及分析

    Air motor speed control system with long tube and its analysis

  25. 步进加热炉速度控制系统建模与动态特性分析

    Dynamic Property Analysis and Simulation of Step Heating-furnace Speed Control System

  26. 铁路驼峰自动化的车辆速度控制系统

    A car speed control system of the automatic marshalling yard system

  27. 基于离散趋近律控制的直流电机速度控制系统

    Reaching Law Control for DC Motor Discrete Time Speed Control System

  28. 造纸机可控硅速度控制系统稳定性和可靠性探讨

    Stability and Reliability of Thyristor Speed Control System in Paper Machine

  29. 本文介绍一种小型直流电机速度控制系统。

    A speed control system of small DC motor is developed .

  30. 排气回收速度控制系统回收效率的评价方法研究

    Research on Evaluation Method of Exhausted-air Reclaiming System 's Reclaim Efficiency