连接杆

该机采用V形摆动臂来驱动磨耗部分沿斜面作往复磨耗运动，V形摆动臂通过连接杆与减速电机轴上的偏心轮连接。

The dental abrasive testing machine applies a V-like swing arm to driving the wearing part to move along the slope back and forth , which is connected with an eccentric wheel fixed on the crankshaft of the gear motor through a connecting rod .

将取自髂骨的植骨块植入C1,2椎板间隙，夹紧连接杆完成固定。

The iliac bone graft was inserted into the space of C1 and C2 , the connecting rod of the clamp was compressed and fixed .

基于UG和ANSYS的连接杆有限元结构分析

Finite element method structural analysis of connecting link based on UG and ANSYS

根据有限元理论，利用有限元软件ANSYS对喷洒装置的主要零部件&主轴、连接杆和支撑杆进行了静力分析。

Based on the finite element theory , the main components are analyzed through the ANSYS software . The static analysis of the spindle , the connecting stem and the supporting stem is done .

6-PRRS机构作为一种特殊构型的新型并联机构，其特点是连接杆长固定，依靠6个直线运动输入驱动，具有单方向较大工作空间的特性，改善了传统并联机构的工作空间小这一不足。

6-PRRS mechanism , as a new parallel mechanism with a special structure , has non-variable length of link and is drived by six linear straight motions , with a single-direction big workspace . It enlarges the workspace of parallel mechanism .

该桥主缆由85根Φ54mm镀锌钢丝绳组成，钢丝标准强度1960MPa，主缆由单根连续的钢丝绳绕过全部索鞍后，在梁内通过螺纹连接杆与连接套筒连接形成环型索。

The main cable is composed of 85 zinc-coated wire ropes with Φ 54 mm and 1960 MPa of standard strength , it , being moved round all the saddles by single continuous wire rope , connects to sleeve through threaded linkage in beam , forming a ring cable .

工字型截面连接杆件是由碳制成。

I-shaped cross section connecting rods are made of carbon steel .

刚接与铰接混合连接杆系结构的几何非线性分析

Geometrically nonlinear analysis of mixed frame structures with rigid and pinned joints

连接杆经皮置入以使软组织损伤最小化（图9）。

Rods are inserted percutaneously to minimize soft-tissue trauma ( Fig.9 ) .

连接杆自动成形设备设计

Development of the Automatic Shaping Device of Draw - bar

对向道岔锁闭器连接杆钻杆接头表面加硬圈

Facing point lock stretcher hard banding of tool joint

连接杆为伸缩结构。

The connection rod is a telescopic structure .

请拧松调整螺丝，拔出或插入连接杆进行调整。

Loosen the adjustment screw , and adjust the length of the link rod .

曲轴以及连接杆都是没有标准的。

Crankshafts and connecting rods are not standardized .

弹性连接杆系的结构优化

Analytical Solutions for Highrise Frame Structures Structural Optimization of the Pole Systems Connected by Elastic Nodes

调节连接杆的长度，踏板的倾斜角度可以自动地变化。

The pedal angle can be changed as desired by adjusting the length of the link rod .

笔杆与连接杆的连接采用螺纹连接，使得连接紧固不易丢失；

The penholder is threaded with the connecting rod to ensure solid connection and prevent loss ; 2 .

对向道岔锁闭器连接杆走向，接触某事物或走近某人。

Facing point lock stretcher move toward , travel toward something or somebody or approach something or somebody .

保护网与拍网并联，电池安装在连接杆内；

The protecting net and the swatter net are parallel . A battery is arranged in the connection rod .

该结构体系由正拱、反拱、腹杆、弦杆以及横向连接杆等构件组合而成的。两个交叉拱一正一反布置，并由其他杆件相连接，构成了整个结构。

The structure is composed of main - arch , minor - arch , chord , wed member and cross-bar .

分别以含理想铰的连接杆结构和桁架结构为对象，采用谱元法研究了铰结构对整体结构动力学行为的影响。

The influences of joints on the dynamic behavior of the integral structure are researched using the spectral element method .

使用它们的不同组合，成功的编出了带有一大孔、一小孔的的四冲程汽车发动机连接杆预制件。

Making use of the new structures combination , a connecting rod preform for a4-stroke automobile engine was successfully braided .

该单元可用来连接杆件与线性实体单元，用于进行结构-基础-地基系统和组合结构的分析。

The element may be used to join bars and linear solid elements in analyzing structure-foundation-soil systems and compositive structures .

连接杆的一端固定在支架的中部或下端；

One end of the connecting rod is fixed to the middle part or the lower end of the bracket .

固定针尚可固定在连接杆前后两面，形成稳定的三角构形。

The pins can be fixed on the anterior and posterior sides of the frame , with a stable angle structure .

圆凿为可调式空心圆凿，包括凿柄、连接杆和凿芯；

The osteotome is adjustable hollow gouge , which comprises a gouge handle , a connection rod , and a gouge core .

连接杆件的管状连接，其最小长度应该是其外径的两倍。

The tubular connection of the frame components to be fitted together shall have a minimum length of two times the outside diameter .

该装置主要由制动轨、支撑臂、连接杆、液压系统和控制系统所组成。

This device is mainly composed of braking rails , a supported arm , a connected pole , hydraulic system and control system .

其结构包括顶盖、风扇、诱虫灯管、连接杆和网袋。

The utility model is composed of a coping , a fan , an entrapping lighting tube , a connecting rod and a web .

该外固定器主要包括连接杆、固定夹及骨针，可组合成单平面单边形和双边形等结构。

It was composed of connective rod , clamp and bony pin , and could be assembled into both unilateral and bilateral one-plane configurations .