过硫酸铵

研究以高锰酸钾、硫酸锰、过硫酸铵等为主要原料，制得新型吸附剂，用这种吸附剂可通过预氧化与吸附同时进行，将水中的各形态砷除去。

The study prepared a new adsorbent with potassium permanganate , manganese sulfate , and ammonium persulfate as main raw materials , and this adsorbent can function as pre-oxidation and adsorption at the same time and remove various forms of arsenic from water .

过硫酸铵-N，N，N′，N′-四甲基乙二胺体系产生的氧自由基及其清除的研究

Studies on generation and scavenging of oxygen radicals in the system of ammonium persulfate - n , n , n ' , n ' - tetramethyl Ethylenediamine

第一种方式为nmMnO2和过硫酸铵同时与苯胺混合，一起参与苯胺的氧化聚合。

The first method is that nm-MnO_2 and APS was mixed together with aniline at the same time .

首先用过硫酸铵（APS）水溶液氧化改性炭黑，制备亲水性的炭黑悬浮液。

First hydrophilic carbon black suspensions was prepared by oxidation using ammonium persulfate ( APS ) as an oxidant .

过硫酸铵引发壳聚糖与AM及DMAEMA的接枝共聚合成与应用

Synthesis and Application of Graft Copolymerization of AM and DMAEMA onto CTS Using Ammonium Persulfate

选用苯乙烯和丙烯酸为单体，过硫酸铵为引民剂，合成了P（St-co-AA）微球，单体转化率可达90%以上。

P ( St-co-AA ) microspheres were synthesized with styrene and acrylic as monomers , ammonium persulfate as initiator . The monomer conversion was up to90 % .

结果表明，聚苯胺粒子的直径随R（水相质量/乳化剂质量）提高而增加；盐酸掺杂聚苯胺的电导率随R的提高及氧化剂过硫酸铵与苯胺的摩尔比的提高而降低。

The results show that the particle size increases with the raising of R ( water mass / emulsifier mass ), and the conductivity of polyaniline doped hydrochloride decrease with the raising of R and [ ammonium persulfate ] / [ aniline ] .

本文以过硫酸铵为引发剂，在水相中合成了以马来酸酐、丙烯酰胺和丙烯酸乙酯为单体的三元共聚物，并研究了共聚物的用量、Ca2+浓度、碱度以及pH值对阻垢效果的影响。

The ternary copolymer with ammonium persulfate as initiator , maleic anhydride , acrylamide and ethyl acrylate as monomers was prepared through synthesis . The effect of the copolymer usage , Ca2 + concentration , alkalinity and pH value on scale inhibition was studied .

使用浓硝酸、双氧水、酸性高锰酸钾、过硫酸铵等强氧化剂处理C／C，可以增加材料表面含氧官能团的含量，增强材料在模拟体液当中诱导钙磷沉积的能力。

When treated with concentrated nitric acid , hydrogen peroxide , acidic potassium permanganate , ammonium persulfate and other strong oxidizing agents , oxygen-containing functional groups on C / C were increased and the ability of C / C to induce Ca-P deposition in simulated body fluid was enhanced .

以过硫酸铵为引发剂，通过种子微乳液聚合的方法研究了阴离子型Gemini表面活性剂在形成涂料或胶粘剂用乳液中的功能。

Function of Gemini emulsifiers as anionic emulsifier in emulsion for coatings and adhesives is described by the process of seeded micro-emulsion polymerization initiated by the initiator ammonium persulfate ( APS ) .

在70℃下，以过硫酸铵（APS）为引发剂，采用单体滴加法，进行微乳液聚合，制得的聚甲基丙烯酸甲酯（PMMA）微乳液可形成几乎透明的物理水凝胶。

Nearly transparent PMMA physical hydrogels were formed during a monomer post added microemulsion polymerization procedure by using ammonium persulfate ( APS ) as an initiator at a higher temperature up to 70 ℃ .

通过对壳聚糖与甲基丙烯酸甲酯（MMA）接枝反应的研究，运用过硫酸铵-硫代硫酸钠为引发剂，得出不同反应条件对接枝反应的影响规律。

By the research of chitosan and MMA grafting copolymerization , using ammonium persulfate and hyposulphite as an initiator in acetic acid solution . The influencing rules of reaction conditions to graft reaction were discussed .

本文研究了以壳聚糖和二甲基二烯丙基氯化铵（DMDAAC）为原料，过硫酸铵为引发剂，合成季铵盐改性壳聚糖絮凝剂的方法。

The modified chitosan flocculant was made by graft of chitosan and dimethyldiallylammonium chloride ( DMDAAC ) using the ammonium persulfate as initiator .

选择过硫酸铵（APS）/脂肪胺类氧化还原型引发体系，研究合成高分子量的水溶性聚丙烯酸钠（PNaAA）的聚合动力学。

Polymerization kinetics of high molecular weight and water-soluble poly ( acrylate ) sodium initiated by redox initiator of ammonium persulfate ( APS ) / aliphatic amine were studied .

以十二烷基苯磺酸（DBSA）为乳化剂，十六醇（CA）为助乳化剂，盐酸和十二烷基苯磺酸（DBSA）为掺杂剂，过硫酸铵为引发剂，采用乳液聚合法合成了导电聚苯胺（PAn）。

The transmiting electric polyaniline was synthesized by emulsion polymerization which was carried out by using dodecylbenzene sulfonic acid as emulsifier , hexadecanol as cosurfactant , hydrochloric acid and dodecylbenzene sulfonic acid as doping agent , ammonium persulfate as initiator .

介绍了以丙烯酸（AA）和烯丙基磺酸钠（AS）为单体，过硫酸铵为引发剂，水为溶剂合成二元共聚物防垢剂XD-1的方法。

Method to synthesizing binary copolymer scale inhibitor XD-1 from acrylic acid ( AA ) and sodium allyl sulphonate ( SAS ) as monomers using ammonium persulfate as initiating agent , water as solvent was given .

以丙烯酰胺（AM）为接枝单体、过硫酸铵（APS）为引发剂对真丝纤维进行了接枝共聚反应，分析了接枝率的影响因素，测试了改性真丝纤维的形态结构和主要性能。

The factors influencing the graft rate were analyzed with the graft copolymerization of the silk fiber with acrylamide as grafting monomer and ammonium persulfate as initiator . The structure and primary properties of the modified silk fiber were also tested .

以过硫酸铵[（NH4）2S2O8]为引发剂，采用水相沉淀自由基聚合工艺可以合成AIA含量合适，分子量较高且分布较窄的AN／AIA共聚物。

Aqueous deposited copolymerization initiated by ammonium persulfate [ ( NH_4 ) S_2O_8 ] can be used to polymerize AN / AIA copolymers . The copolymers have superior properties , such as : befitting AIA content , high molecular weight and narrow distribution .

以衣康酸（IA）、苯乙烯磺酸（SSA）和丙烯酸（AA）为单体，过硫酸铵为引发剂，异丙醇为链转移剂，在水相中合成了IA/SSA/AA共聚物阻垢剂。

A terpolymer called IA / SSA / AA has been prepared from itaconic acid ( IA ), styrene sulphonic acid ( SSA ) and acrylic acid ( AA ) in water phase by using persulfate ammonium as initiator , 2-propanal as chain-transfer agent .

在CTAB/水、CTAB/水（KBr）两种O/W型微乳液反应体系中，以过硫酸铵为氧化剂容易得到聚吡咯纳米线或纳米纤维，但是KBr的浓度影响着聚吡咯纳米材料的形态。

The PPy nanofibers and nanowires using APS as oxidizer synthesized in CTAB / water and CTAB / water ( KBr ) systems were easily obtained , but the concentration of KBr influenced the morphology of PPy .

本研究所确定的最佳腐蚀工艺条件为溶液中TMAH浓度为25%，过硫酸铵添加剂浓度为3%，腐蚀温度80℃。

Optimal process condition for manufacturing silicon microstructure in the research is that TMAH is 25 % , and ammonium persulfate is 3 % in solution , and etching temperature is 80 ℃ .

研究了PVA含量、苯胺（An）与DBSA的量比、氧化剂过硫酸铵（APS）与An的量比及反应温度对膜的电致变色性、导电性的影响。

Factors affecting the electric and the electrochromic properties of the film , such as the content of PVA , the molar ratio of DBSA , aniline ( An ), and ammonium persulfate ( APS ), reaction temperature , etc , were studied .

还介绍了添加剂&过硫酸铵（APODS）和吡嗪的加入对腐蚀表面形貌及腐蚀速率的影响。与赵胤胤的时间之旅

The influence of the additives-ammonium peroxydisulfate ( APODS ), and pyrazine on etching rate and etched surface morphology are also discussed . Melodies Etched With Time

在苯胺/nmMnO2/过硫酸铵的反应体系中，研究了nmMnO2通过两种不同的加料方式原位制备PANI/nmMnO2复合材料的合成条件。

In the aniline / nm-MnO_2 / ammonium peroxodisulfate ( APS ) / acid / water system , the in-situ synthesis conditions of polyaniline / nm-MnO_2 composite ( PANI / nm-MnO_2 ) were studied by two different feeding methods of nm-MnO_2 into the reaction system .

脆硫锑铅矿的浮选行为依赖矿浆电位。矿浆电位调节所用药剂为过硫酸铵（（NH4）2S2O8））和硫代硫酸钠（（Na2S2O4））。

The flotation behavior of jamesonite was also dependent on pulp potential and the reagents for adjusting the potential used were ammonium persulfate (( NH4 ) _2S_2O_8 ) and sodium dithionite ( Na_2S_2O_4 ) .

使用过硫酸铵为破胶剂时，30℃下破胶时间很长，加入活化剂BT6或TA1使破胶时间缩短到1～2小时；

Ammonium persulfate as gel breaker , with which the gel breakdown time at 30 ℃ is long and shortened to 1 & 2 hrs with activator BT-6 or TA-1 introduced additionally ;

结果如下：1.以SBA-15为模板，采用液相浸渍的方法将氯化镉引入复合材料的前驱体溶液中，过硫酸铵既做聚合引发剂又提供硫源，原位制备出CdS/CMK-3复合物。

The results are summarized as follows : The CdS / CMK-3 composites were successfully synthesized with SBA-15 as the template by in situ liquid impregnation method that introduced cadmium chloride into precursor solution , using ammonium persulfate as both the polymerization initiator and the sulfur source .

研究结果表明，防皱整理的最佳工艺条件为：马来酸酐8%，过硫酸铵4%（对马来酸酐重），壳聚糖0.05%，次亚磷酸钠7%，三乙醇胺4%，170℃焙烘2min。

It is said that the optimum conditions for DP finish are 8 % maleic acid anhydride , 4 % ammonium persulfate ( ratio to maleic acid anhydride weight ), 0.05 % chitosan , 7 % sodium phosphite , 4 % triethanolamine , curing at 170 ℃ for 2 minutes .

过硫酸铵&丁二酮肟示差分光光度法测定镍铁中的镍

Determination of Ni in Nickelferrite by Ammonium Persulfate-dimethylglyoxime Differential spectrophotometry Method

过硫酸铵氧化光度法催化剂的替代研究

Study of Substitution for Catalyst of Oxidation-lightness Method of Ammonium Persulphate