软聚氯乙烯

  • 网络PVC;SPVC;S-PVC;flexible pvc
软聚氯乙烯软聚氯乙烯
  1. 研究了利用废旧软聚氯乙烯回收料(旧料)生产PVC塑料防水卷材的配方及其对卷材拉伸性能的影响。

    The formulation for the production of waterproof rolled PVC sheet by utilizing waste soft PVC and the effects of some ingredients on the tensile properties of the rolled sheet were studied .

  2. 软聚氯乙烯注塑料外润滑剂选择研究

    Selection of Outer Lubricants for the Injection-mould Material of Soft PVC

  3. 本文利用毛细管流变仪研究了用偶联剂改性硅灰石粉对软聚氯乙烯(软PVC)体系流动性能的影响。

    In this paper , fluidity of soft PVC-wollastonite composites was studied by capillary tube rheometer .

  4. 应用于软聚氯乙烯(PVCS)时,断裂强度、断裂伸长率均得到提高,而永久变形量明显降低,并且交联时间的延长对力学性能影响显著。

    When the crosslinkers were applied to PVC-S , tensile strength and elongation at break increased , simultaneously , and the deformation set decreased . The time of crosslinking possessed an effect on the mechanical properties .

  5. 研究了丙烯腈-丁二烯-苯乙烯共聚物(ABS)/软聚氯乙烯(SPVC)共混体系的相态结构和力学性能。

    This paper studied the phase structure and mechanical properties of the blending system consisting of acrylonitrile-butadiene-styrene copolymer and soft poly ( vinyl chloride ) ( ABS / SPVC ) .

  6. 研究了成核剂对软聚氯乙烯(SPVC)发泡材料拉伸性能的影响。

    The effect of the content of nucleate agent on the mechanical properties of soft poly ( vinyl-chloride )( SPVC ) foamed material was investigated .

  7. 金属配合物对软聚氯乙烯的阻燃消烟作用

    Metal Chelates as Flame Retardants and Smoke Suppressants for Flexible PVC

  8. 结合这些要求,材料选择软聚氯乙烯。

    Combine these require material choose the soft polyvinyl chloride .

  9. 硅灰石粉填充软聚氯乙烯性能的研究

    The Research on Properties of Soft PVC Filled with Wollastonite

  10. 新型热可逆共价交联剂对软聚氯乙烯性能的影响

    Influence of novel thermo-reversible covalent cross-link agent on soft polyvinyl chloride 's properties

  11. 目的探讨软聚氯乙烯塑料袋装溶液影响胰岛素吸附的相关因素。

    Objective To study the factors relative to the packed PVC influencing the insulin adsorption .

  12. 赋予软聚氯乙烯材料阻燃性的方法中,添加无机阻燃消烟剂是被普遍采用的方法之一。

    Adding the inorganic flame retardant and smoke suppressant to the flexible PVC is a very popular method to enhance the flame-retardant property .

  13. 增塑剂是制备软质聚氯乙烯(PVC)材料必不可少的一种添加剂,目前广泛使用的是具有潜在危害的邻苯二甲酸酯类增塑剂。

    Plasticizer is an essential additive for preparation soft polyvinyl chloride ( PVC ), so far phthalate esters plasticizer with potential hazard is widely used .

  14. 纳米CaCO3对阻燃型软质聚氯乙烯的增韧增强作用

    Flame-retardant and Plasticized PVC Toughened and Reinforced by Nano-CaCO_3

  15. 采用表面电阻测试和扫描电镜,分析研究了软质聚氯乙烯(PVC)树脂与炭黑(CB)复合体系的抗静电性与炭黑含量、分布形态、PVC树脂型号及混炼塑化工艺之间的关系。

    Antistatic properties of carbon black ( CB ) filled plasticized poly ( vinyl chloride ) ( PVC ) were studied using surface resistivity tester and SEM .

  16. 采用刚果红法研究了防老剂、有机过氧化物、填料、金属氧化物、增韧改性剂、加工助剂和润滑剂等助剂的品种、用量对软质聚氯乙烯(PVC)脱氯化氢反应的影响。

    The influence of the kind and adding amount of such additives as antioxidants , organic peroxides , fillers , metal oxides , toughening modifiers , processing aids and lubricants on dehydrochlorination of soft polyvinyl chloride is studied by Congo red method .

  17. 使用Brabender塑化仪,通过熔融共混制备了软质聚氯乙烯/无机纳米粒子复合材料;利用加热失重法和傅立叶红外光谱法研究了增塑剂在该材料中的迁移规律。

    It prepared the flexible PVC / inorganic nano-particles composites by means of melt blending method , as well as by a kind of Brabender Plasticorder , and studied the migratory law of plasticizer in the composites by measuring weight loss on heating and FTIR .

  18. 着色剂对软质聚氯乙烯脱氯化氢反应的影响

    The influences of colouring agents on the dehydrochlorination of flexible PVC

  19. 纳米粒子抑制软质聚氯乙烯中增塑剂迁移的研究

    Study on the Anti-migration Effect of Nanometer Particles on Plasticizer in Flexible PVC

  20. 填料对软质聚氯乙烯硬度及力学性能的影响

    Effects of Fillers on Properties of Flexible Polyvinyl Chloride

  21. 共混改性软质聚氯乙烯耐寒性的研究

    Studies on Cold Resistance of Soft PVC Blends

  22. 软质聚氯乙烯材料的改性研究

    Study on the modification of soft PVC materials

  23. 三种细度滑石粉填充软质聚氯乙烯体系流变行为的研究

    Study on Rheological Behavior of Soft PVC Filled with Three Different Mesh of Talc

  24. 滑石粉填充软质聚氯乙烯的研究

    A Study of Talc Filling Soft PVC

  25. 耐寒性是软质聚氯乙烯的重要性能指标之一。

    The cold resistance is an important property of soft polyvinyl chloride ( PVC ) .

  26. 自热方便食品水合发热剂的研究软质聚氯乙烯用阻燃剂

    Studies on a hydration type of heating agent used as hot source for self heat instant foods

  27. 介绍软硬质聚氯乙烯共挤模具设计与调试的要点。

    The die design of coextrusion and the essentials of die debugging for the soft and rigid PVC and introduced .

  28. 利用环氧树脂胶粘剂粘结软质聚氯乙烯作为金属板材的内衬,通过电化学阻抗测试分析了聚氯乙烯内衬耐酸耐碱性能。

    Soft PVC cemented with epoxy adhesives was used as the inside lining of the metal plate and its anti-corrosion performance was analyzed through the electrochemistry impedance test in this article .

  29. 研究了螯合剂对热稳定性能的影响,考察CaZn复合热稳定剂在软、硬质聚氯乙烯(PVC)配方中的应用,着重研究其静态热稳定性和抗紫外性能。

    The influence of chelating agent on the heat stability was discussed . The application of Ca-Zn composite heat stabilizer in the soft and rigid PVC was also studied . Static heat stability and UV-resistant property of calcium-zincum composite heat stabilizer were studied mainly .