车辆制动

  • 网络vehicle brake
车辆制动车辆制动
  1. 车辆制动系统的研究与CAD

    Research and Computer Aided Design of Vehicle Brake System

  2. 基于MATLAB的车辆制动过程仿真研究

    Simulation Studies on Vehicle Brake Process Based on MATLAB

  3. 基于ARM的车辆制动自动监控系统设计

    The Designs of Vehicle Braking Automatic Monitoring System Based on ARM

  4. 铁道车辆制动盘材料的K指标分析

    Analyze on the K index of railway brake disk material

  5. 装备有ABS的事故车辆制动性研究与分析

    Braking Research and Analysis of Traffic Accident Vehicle with ABS

  6. 制动防抱死系统(ABS)是提高车辆制动性能和行车安全性的重要装置。

    Anti-lock Braking System ( ABS ) is a device for promoting vehicle braking performance and travelling safety .

  7. 介绍了装备ABS车辆制动综合性能的评价体系,并探讨了道路试验项目及其评价内容。

    This paper introduced mainly braking integrated performance evaluation system of vehicle installed ABS , expounded road experimentation projects and evaluation content .

  8. 建立了一种两轮车辆制动防抱死系统(ABS)的车辆模型、车轮模型、制动器模型和气压系统模型;

    A two-wheel vehicle model for ABS was established , including body model , tyre model , brake model and air braking system .

  9. 最后,本文给出车辆制动系统CAD总体方案设计,建立制动系统各部分性能分析、计算的CAD系统基本模型。

    In the last , the whole design scheme about vehicle brake system CAD is presented , and the basic model of the CAD system including the capability analysis and calculation of the brake system are established .

  10. 基于HMIS的机车车辆制动性能检测系统的研究与开发

    Trains ' Brake Performance Testing System Based on Railway Management Information System

  11. 从提高车辆制动性能兼顾合理经济性的角度出发,确定了多轴车辆AOH制动系进行ABS控制的基本方法为气压控制式;

    Considering the capability improvement and the economical efficiency at same time , the pneumatic mode is determined as basic ABS control method .

  12. 研究了具有EBD功能的四轮车辆制动过程;

    The paper analyzes a four-wheel vehicle with the function of Electronic Brake force Distribution ( EBD ) .

  13. 建立了一种四轮车辆制动防抱死系统(ABS)的车辆模型、轮胎模型、路面状况模型和轮速传感器模型,嵌入了气压制动系统和ABS控制逻辑模拟;

    A four-wheel vehicle model and simulation for ABS application , including body model , tyre model , brake model and wheel speed detector model as well as the air braking system with real channels and valves are imbedded for real time simulation .

  14. 针对车辆制动转向的稳定性问题,提出了基于模糊神经网络辨识的T-S模糊模型制动转向稳定性的预测控制方法。

    To deal with stability problem of a vehicle combined steering and braking , its dynamics is analyzed . To establish model of the vehicle , a T-S fuzzy model and its identification algorithm are developed based on fuzzy neuro network .

  15. 车辆制动缸压力的控制精度达到制动命令要求值的±20kPa。

    The controlling accuracy of brake cylinder pressure reaches brake command target value ± 20 kPa .

  16. 为提高传感器的温度性能,利用PIC单片机对传感器进行温度补偿。缓速器是一种辅助刹车系统,无接触制动方式,通过车轮高速转动与电磁作用,吸收车辆制动能量,达到减速的目的。

    To improve temperature performance of electric eddy transducer , PIC single chip processor is adopted for temperature compensation of transducer . Electric eddy retarder is a kind of auxiliary braking device which can increase the life of vehicles ' ( transmitting ) and braking systems .

  17. 在分析车辆制动过程中的发动机反拖阻力、道路阻力、ISG电动机制动力以及电池充电功率的关系的基础上,提出了再生制动制动力控制策略和能量最大化回收的再生制动换挡策略。

    Relationships of engine drag resistant force , road resistant force , ISG regenerative brake force and battery charge power are analyzed . Control strategy of regenerative brake force and regenerative brake shift rule are proposed . 4 .

  18. 并由此计算车辆制动距离、车辆加减速度等,并能完全按照《联合国欧洲经济委员会汽车制动法规》ECER13的要求进行整套的ABS道路试验。

    From those data , the vehicle braking distance and vehicle deceleration acceleration can be calculation . With this system , the whole test can be finished according the standard of ECE Regulation R 13 Annex 13 : Test requirements for vehicles fitted with anti-lock systems .

  19. 目前,我国实行机动车定期安全检测制度对上路机动车的技术状况进行判定,其中关于车辆制动性能的合格判定是依据GB7258-2004《机动车运行安全技术条件》中的技术要求。

    At present , China has adopted the regular inspection of motor vehicle safety system to determine the technical conditions . Braking performance eligibility is determined by national vehicle safety technical standard ( GB7258-2004 ) .

  20. 车辆制动的台架检测和数据处理方法分析

    Analysis of bench measurement and data processing method for vehicle brake

  21. 地铁车辆制动闸瓦国产化的研制与试验

    Development and Test on Nationalization of Brake Shoes for Metro Cars

  22. 车辆制动系统中活塞杆断裂原因分析

    Fracture analysis of the piston - rod in vehicle brake system

  23. 一种基于单片机的机动车辆制动性能测试仪设计

    A Monitor for Vehicle Braking System Performance Based on Single-chip Computer

  24. 由事故车辆制动痕迹推算车速方法的探讨

    Determine the Travel Speed from Braking Tracks during Traffic Accident

  25. 多轴工程车辆制动性能试验研究

    An Experimental Study on the Brake Performance of Large Multi-Axle Construction Vehicles

  26. 车辆制动系统热衰退是引发山区交通事故的一个重要原因。

    The heat fade of Vehicles braking system is an important reason .

  27. 获取车辆制动力矩的一种新的数字信号处理方法

    A New Way of Signal Processing about the Acquisition of Breaking Torque

  28. 轨道交通车辆制动用中继阀的可靠性

    Reliability of Relay Valve of Brake System for Rail Vehicles

  29. 车辆制动力实测研究与分布建模

    Braking Effort Testing of a Vehicle and its Distribution Model

  30. 整组套件可有效提升车辆制动效果,提升人身安装。

    The entire system could advance the braking effect and human safety .