试验机
- 名tester
-
冲击试验机同步提升系统的神经元PID控制
Neural PID control of synchronous hoisting system for impact tester
-
基于MCU的水泥抗折试验机的研制
The Development of Cement Intensity of Breaking Tester Based on MCU
-
模糊PID控制器在液压万能试验机上的应用
The Application of Fuzzy-PID Controller on Hydraulic Universal Testing Machine
-
V型牙科磨耗试验机的研制及应用
The development and application of V - type dental abrasive testing machine
-
高速机械密封试验机用电主轴设计与CAD
Design of High Speed Electro-spindle for Mechanical Seals Testing Machine and the Application of CAD
-
在铸捷CAD/CAM快速成型试验机的基础上,开发了一套新的成型控制系统。
A new control system for RP is developed based on the test machine named Quick Casting CAD / CAM .
-
EMC在摩擦磨损试验机研制中的影响及对策
Influence of Electromagnetic Compatibility in Developing Frictional Wear Test Machine and Its Countermeasures
-
MTS数字程控伺服岩石刚性试验机功能开发
On the function development of MTS program-controlled rock stiff test machine
-
基于AVR单片机的电液伺服疲劳试验机控制系统
Control System of Electro-Hydraulic Servo Fatigue Testing Machine Based on AVR Microcontroller
-
基于AVR单片机的万能材料试验机控制系统
Automatic control system for multifunctional material testing machine based on AVR single chip microcomputer
-
采用电弧喷涂制备了Al涂层、Zn涂层和AlZn伪合金涂层,在Falex试验机上测试了3种涂层的磨损性能。
The wear performance of arc sprayed Al , Zn and Al Zn pseudo alloy coatings was investigated using falex tester .
-
基于VxD技术的液压疲劳试验机数字控制系统研究
Digital Control System of Hydraulic Fatigue Testing Machine Based on VxD
-
在销盘摩擦磨损试验机上建立了一套摩擦噪声测试系统,研究了具有相变特征的TRIP钢在单向连续滑动的摩擦试验过程中,摩擦噪声的强度的变化规律。
In the process of friction testing in which the TRIP steel with transformation characteristics is continuously sliding in unilateralism , variety rule of the friction noise intensity was studied .
-
将处理后的纳米SiO2粒子添加到淀粉浆料中制备成膜,并用耐磨试验机测试了纳米SiO2粒子含量对浆膜耐磨性能的影响。
The effect of the content of SiO_2 nanoparticles on the wearing property of the starch film was measured using a wear tester .
-
通过万能材料试验机测试硫化胶的物理机械性能,以及利用扫描电镜(SEM)观察了炭黑颗粒在橡胶基体中分散情况,提出了亲水性炭黑对天然胶乳的补强机理。
The mechanical properties of vulcanizates were tested through the universal material test machine and the carbon black particles dispersed in rubber matrix by scanning electron microscopy ( SEM ) .
-
在摆锤式示波冲击试验机上采用小角度冲击方法测试了某船用低合金钢的动态弹塑性断裂韧度J(Id)。
The dynamic elastic-plastic fracture toughness J_ ( Id ) of a low alloy shipbuilding steel has been examined by low blow test using an instrumented Charpy impact machine .
-
10T型电液力伺服试验机系统的分析建模及其实验修正
The analytical modelling and experimental modification for 10t electro-hydraulic force servo testing machine system
-
以恒应力方式在Mayes试验机上对自行研制的铸造MgYNd合金进行了压缩蠕变实验。
The compress creep tests of the cast Mg-Y-Nd alloy were carried out at constant stress on Mayes fatigue machine in air .
-
本项研究根据岛津液压伺服材料试验机和CT试样的特点,首次提出了基于通过测量反映加载点位移的试验机活塞位移的卸载柔度法来测量裂纹长度。
According to the characters of SHIMADZU electro hydraulic servo controlled fatigue testing machine and CT specimen , put forward a method based on compliance of stroke displacement which reflects the displacement of loading point at first time .
-
另外,作者设计了一台适合于RD2&3型试验机的蠕变-疲劳控制装置;并讨论了C形试样极限载荷PL的计算公式。
In addition , a set of creep-fatigue controlling device which adapts for RD_2-3 tester is designed and a calculative formula of limit load PL of C-shape specimen is discussed .
-
利用Instron万能拉伸试验机测试所得试件的拉伸负荷、0.2%屈服负荷,用扫描电镜分析断裂口性状。
The tensile strength and 0.2 % yield strength were measured on Instron universal testing machine .
-
1000t真三轴试验机深基础沉箱法施工技术
The deep - basement sinkbox construction technique of 1000-ton real 3-axis experiment fitment
-
利用环块磨损试验机在不同载荷下对热喷涂Al2O3-TiO2复合陶瓷涂层的乳化液润滑滑动磨损特性进行了研究。
The sliding wear behavior of thermal-sprayed Al2O3-TiO2 ceramic coating has been investigated with a ring-on-block wear tester under different loads in emulsion lubrication sliding .
-
通过X射线衍射、四探针测试仪及电子万能试验机等表征了C/C复合材料的石墨化度、电阻率以及抗压强度。
The graphitization extent of C / C composite was investigated by X-ray diffraction , the resistivity and compressive strength of C / C composites were monitored by the Four-Point Probes and Electronic Universal Testing Machine , respectively .
-
GLEEBLE材料热模拟试验机高温压缩试验的数据整理与修正
The collating and correcting of data in hot compressing test for Gleeble material hot modeling test machine
-
本文采用的是PLC来控制试验机加载系统,在了解PLC的工作原理和特点基础上,对试验机加载系统的软硬件部分进行了深入的研究。
In this paper , PLC is adopted to control loading system of testing machine . Based on learning about working principle and characteristic of PLC , software and hardware parts of loading system have been studied deeply .
-
同时将其填充到乙烯-醋酸乙烯酯共聚物(EVA)树脂中,采用转矩流变仪、拉力试验机和氧指数仪对EVA/氢氧化镁混合物的流变性能、力学性能和阻燃性能进行了研究。
In addition , the rheological , mechanical , and flame-retard properties of EVA / MH blends have also been studied by using rheometer , tensile testing machine and limiting oxygen index tester .
-
用Gleeble2000热模拟试验机对82B钢奥氏体再结晶进行了研究。
The austenite recrystallization behaviors of 82B high carbon steel were investigated by Gleeble 2000 thermal-mechanical simulator .
-
在球盘式摩擦磨损试验机上,采用阶梯加载方式,测定了润滑条件下钢/钢滑动摩擦副的临界载荷-速度(P-V)图,分析了P-V图各区域的摩擦磨损特性。
This paper investigated the P-V digram for steel / steel rubbing pair under lubrication on a " ball-on-disc " testing machine , using the stepwise loading method , and analysed the behavior or friction and wear in various regions of the diagram .
-
论文在板簧试验机上用参数补偿的模型参考自适应控制算法、Lyapunov稳定理论进行了推导,用微机实现了系统的控制。
In this paper , an algorithm of model reference adaptive control with the parameter compensation using Lyapunov stable theorem is derived for a spring leaf testing machine , and realized with a microcomputer .