结合剂

Al镀层可与结合剂发生反应，还原出单质Pb和B2O，破坏了结合剂的玻璃结构；

Aluminum coating could react with the bond and damage the wet structure .

Ti对铝基结合剂性能的影响和机理的分析

Analysis on the effect and mechanism of Ti on the properties of Al-based bond

抗肿瘤药物DNA小沟区结合剂的研究进展

Review on DNA minor groove binders as antitumor drugs

基于LabView的数据采集系统在金属结合剂金刚石砂轮电火花整形上的应用

Application of data acquisition system based on lab view to EDM dressing of metal-bonded diamond grinding wheel

合金元素P、Cu含量对铸铁短纤维结合剂组织和性能的影响

EffEct of P and Cu Content on the Properties and Microstructure of Sintered Compacts with Short Cast Iron Fiber

镀W金刚石与金属结合剂界面成分、结构及结合性能

Study on Interface Composition Structure and Bond Properties between W-clad Diamond and Copper Alloy

有Ti涂层的CBN与陶瓷结合剂烧结体的显微结构研究

Study on the Microstructure of Ti-Coated CBN Sinters with Ceramic Binder

利用X射线衍射、红外光谱（IR）等分析手段，对磷酸二氢铝和磷酸二氢铝+硫酸铝复合结合剂的作用机理进行了探讨。

The action mechanisms of aluminum dihydrogen phosphate and the compound binder were approached by XRD and IR analysis .

Guo－032结合剂中间包绝热板工业试验情况

Commercial scale tests on Guo 032 bonded insulating plate of tundish

以高纯氧化铬和改性氧化铝为主要原料，选用P、C为复合结合剂，研制成功了Cr－100铬质泥浆。

A high purity chromite and modified chromite were uscd as main raw material with P C composite binder to pro-duce the Cr-100 slurry .

LiF和B2O3在Al-Si-O陶瓷结合剂中的作用

Effect of LiF and B_2O_3 in Al-Si-O Ceramic Bond

已经制备出一种新颖.的肝素结合剂，这是一种可以被生物降解的多乳酸（PLA）肝素聚合体。

A novel heparin-conjugated biodegradable polymer , polylactide ( PLA ) - heparin , was prepared .

陶瓷结合剂CBN砂轮磨削表面粗糙度的试验研究

Experimental Research on Surface Roughness in Grinding with Vitreous Bond CBN Wheels

磨削液对陶瓷结合剂CBN砂轮磨削性能影响

Effect of Grinding Fluid on Grinding Performances of Vitrified Bonded CBN Wheel

磨喷油嘴陶瓷结合剂CBN砂轮的研制及应用

Vitrified Bond CBN Wheel for the Grinding of Injection Nozzle

低温CBN砂轮陶瓷结合剂的研究

Study of low temperature vitrified bond of cubic boron nitride grinding wheel

陶瓷结合剂CBN砂轮磨削钛合金的研究

A Study on the Grinding of Titanium Alloys with Vitrified CBN wheel

纳米AlN对低温陶瓷结合剂金刚石磨具结构与性能的影响

Effects of nano-AlN on structure and performance of low temperature vitrified bond diamond tools

FT型无水结合剂的研制

Development of FT Type Water-free Binder

不同无机铵盐对陶瓷结合剂CBN砂轮造孔的应用研究

Pore-forming effect of different inorganic ammonium salts applied on vitrified bond CBN wheels

改善SiC微粉的分散性以及与树脂结合剂的相容性，以提高树脂磨具的使用性能。

And how to prepare the dispersed and compatible SiC powder in order to enhance the application capacity of resinoid abrasive polishing wheel .

树脂结合剂CBN磨具的磨削性能取决于磨具的修整效果，磨具修整的效果关键在于其修整方向。

Grinding performances of resin bond CBN grinding tools depend on their dressing technique , for which the dressing direction is the most important .

双电极接触放电法在金属结合剂CBN砂轮修整中的应用研究

A Study of Applying Twin Electrodes Contact Discharge Method to Metal-bonded CBN Wheel Dressing

陶瓷结合剂CBN砂轮的修整

Dressing of Vitrified Bond CBN Grinding Wheel

树脂结合剂CBN砂轮表面状态对磨削比的影响

The Influence of Surface State of Resin - Bonded CBN Wheel on the Grinding Ratio

α环蛇毒素荧光结合剂显示运动终板，NIH图像分析技术测定末梢神经与运动终板的重叠面积。

The overlap areas of terminals and endplates were measured with NIH image technique .

相对而言，NiCrP效果更好，这与Cr对金刚石的化学活性较高，NiCrP熔点较低以及金刚石、镀层、结合剂三者之间的界面反应等有关。

For the comparatively high activity of Cr and the low melt point of Ni Cr P , Ni Cr P coating is more effective than Ni W P coating .

纯铝酸钙水泥作为结合剂用于MgO质浇注料时，浇注料的抗渣渗透性能极差。

The properties of slag infiltration resistance of MgO based castable became very bad when calcium aluminate cement was used as binder .

金属结合剂杯形小直径CBN砂轮端面磨削沟槽底面时砂轮的自锐效应

Effect of CBN wheel self-dressing in face grinding of groove bottom with metal bond cup CBN quill

机床特性对陶瓷结合剂CBN砂轮磨削比的影响

Analysis of the influence of the characteristic of machine tool on the grinding ratio of CBN wheel