粘扣

  • 网络velcro;thread gluing;galling
粘扣粘扣
  1. 热身之后,我站在跑步机上,导线从我衬衣下出来并且通过一个粘扣带固定在我的腹部。

    After warming up , I stand on a treadmill , wires running out from under my shirt and held to my abdomen by a Velcro strap .

  2. 为了连接另一斜坡幼儿健身器材,在直角梯形板材的上端外延处设有硬粘扣。

    For being connected with another slope child body-building equipment , the extension part of the upper end of the right-angled trapezoid plate is provided with a hard thread gluing .

  3. 本机适于粘扣带,松紧带,塑胶拉练,纸带,塑胶带,排线,套管

    Suitable for cutting hook & Loop fastener , elastics , plastic zipper paper , plastics .

  4. API套管圆螺纹接头粘扣失效分析

    Gluing failure analysis of API round thread casing connection

  5. API管螺纹粘扣主要因素的确定方法研究

    Study on Method of Confirming the Leading Factors of API Pipe Thread Gluing

  6. 抗滑脱和抗粘扣是衡量API圆螺纹油管使用性能的两个重要指标。

    : The anti - pullout and anti - gluing are important indices for valuing the connection performance of API round tubing .

  7. 接箍镀铜对油管抗粘扣性能的影响

    Influence of Coupling Copperizing on Anti galling Performance of Tubing Threads

  8. 使用液压钳对油管粘扣的影响分析

    Influence of using hydraulic tongs on thread gluing of tubing

  9. 常规粘扣带由钩面和毛面组成。

    The fastener combines two sides : Hook side and Loop side .

  10. 油井管螺纹粘扣类型及其原因分析

    Thread-sticking Types of Oil Well Tube and Relevant Cause Investigation

  11. 根据客户需求,加工订做各种形状常规及背胶粘扣带。

    All customized Conventional and Gum Type can be supplied at customer demand .

  12. 擦伤、冷焊和粘着摩损是粘扣失效的三种类型。

    The scratch , cold welding and abrasion are three kind of thread failure .

  13. 类:中国结、尼龙粘扣带、背胶魔术贴等。

    Categories : Chinese knot , nylon tape , magic , such as gum .

  14. 油管粘扣失效的分析与对策

    Tubing Thread Gluing Failure : Analysis & Countermeasures

  15. 影响圆螺纹油套管粘扣因素试验研究

    Factors Affecting the Galling of Tubing and Casing with Round Threads : An Experimental Study

  16. 石油油管的粘扣是油管生产和使用过程中常见的一种失效形式。

    : Thread gluing is a common failure of oil tubing found during manufacture and operation .

  17. 改善粘扣现象提高石油套管现场使用质量

    Improving the Quality of Petroleum Casing Pipe Application to the Worksites by Reducing the Thread Gluing

  18. 圆螺纹油管接头齿面接触应力与粘扣分析

    Analysis on the Contact Stress and Gluing of Connection Face of Round Thread Oil Well Pipe

  19. 国产液压钳结构设计未考虑安装限压阀,使泵排量和工作压力较高时,易产成过扭矩而粘扣;

    No discharge valve is designed to assure the hydraulic tongs work under given pressure and flow ;

  20. 螺纹粘扣作为油套管中最常见的失效形式,一直是国内外冶金和石油系统的研究重点。

    The thread galling is a familiar failure of oil tubing and casing as an object of petroleum and metallurgical researchers .

  21. 粘扣是套管接头的失效形式之一,它发生在套管上扣操作过程中的螺纹处。

    Gluing is one of the failure forms for casing connection , and it is occurred in the thread during casing makeup .

  22. 采用增大接箍螺纹端部锥度,降低端部接触压力的方法,提高了套管的抗粘扣性能,并在生产中得到了验证。

    The method of increasing coupling thread end taper and decreasing end contact pressure can improve the anti gluing property of casing .

  23. 研究结果表明:接触应力、上扣扭矩、螺纹啮合时的几何约束,是齿面粘扣的力学要点。

    The research result states that the contacting stress , thread torque and thread joggle geometry restriction are mechanical points of the sticky thread .

  24. 国产液压钳主钳和背钳的间隔距离短,背钳夹持接箍时,因夹持力过大造成接箍变形引起粘扣。另外,油管对中性差也易造成错扣而粘扣。

    The distance between the main tong and the back tong is short , and this causes excessive clamping force on the tubing coupling .

  25. 当把粘扣带粘到连接盒底部时,请不要覆盖中央的型号铭牌。

    When attaching the hook-and-loop fastener to the bottom of the connection box , do not cover the model name plate in the center .

  26. 科学地确定出油井管螺纹粘扣的主要影响因素是提高油井管抗粘扣性能的前提和基础。

    It is a precondition and base of improving anti-galling performance of oil well pipe to make sure the leading influencing factor of API pipe thread gluing .

  27. 为方便外材面层的更换,所述包裹的外材上可以带拉链或粘扣装置。

    For being convenient to change the outside material face layer , the wrapping outside material can be provided with a zipper or a thread gluing device .

  28. 造成密封和滑脱失效的原因较为复杂,最重要的因素是螺纹粘扣降低了螺纹联接的强度和密封性能。

    The reasons caused seal and slippage failure are complicated , the most important factor was the thread gluing reduced the intensity and the sealing property of the thread joint .

  29. 粘扣带剪切强度和剥离强度达到国家标准。

    Its tensile strength reached to an optimal value with modified sericites is 5wt % . ( 4 ) Shear strength and peel strength of Velcro we prepared reached to national standards .

  30. 因此,系统控制,提高螺纹抗粘扣能力是改善螺纹联接性能,减少螺纹滑脱和密封失效的必由之路。

    Therefore , improvement of anti-thread gluing capability by the systems control is the only way to improve the thread joint performance , and reduce the screw thread slippage and seal failure .