碳化铬

研究表明，不同回火温度下该材料的碳化铬析出相的数量存在差异，从而导致冲击韧度的起伏。

The study shows the influence of the existence of chromic carbide on the impact toughness of this material .

Ni基合金-碳化铬复合涂层在酸溶液中的气蚀

Cavitation Erosion of Ni Base Alloy-Chromium Carbide Composite Coatings in Acid Solutions

碳化铬SHS熔覆层的磨料磨损机理研究

Abrasive Wear Mechanism of SHS Coatings of Chromium Carbide Cermet

Cr7C3/Ni3Al复合材料制备过程中碳化铬的溶解再析出行为

Solution and precipitation of chromium carbide during the fabricated process of cr_7c_3 / ni_3al composite

碳化铬/Ni3Al复合材料的高温抗氧化性能

High-Temperature Oxidation Resistance of Chromium Carbide / Ni_3Al Composite

镍基-碳化铬硬面复合涂层的疲劳强度

Fatigue Strength of Ni Base Alloy - Chromium Carbide Composite Coating

镍基-碳化铬复合涂层材料的界面分析

Interfacial Analysis of Ni-based Alloy and Chromium Carbide Composite Coating

金刚石表面生成碳化铬的物理机制

The Physical Mechanism of Chromium Carbide Formation on Diamond Surface

从马氏体转变成网状的碳化铬。

Transformation of martensite into a network of chromium carbides .

熔渣法碳化铬涂层的抗氧化性能研究

Oxidation Resistance of Chromium Carbide Coating by Molten Slag Method

碳化铬粉的研制与生产

Research and produce of the powder of chromium carbide

碳化铬基硬质合金中的异常梯度结构

Abnormal gradient microstructure in Cr_3 C_2 based cemented carbide

碳化铬-镍铬涂层对几种陶瓷的滑动摩擦磨损

Sliding Friction and Wear of Chromium Carbide - Nickel Chromium Coating Against Ceramic Materials

碳化铬／铁基自熔合金复合涂层真空反应钎涂

Chromium carbide / Fe-based self-fluxing alloy composite coatings produced by vacuum reactive braze coating

爆炸喷涂工艺制备碳化铬涂层

Study on the Chromium Carbide Detonation Spray Coatings

因此，碳化铬硬质合金是制作电真空玻璃制品的理想模具材料。

Therefor chromium carbide is an ideal die material for producing electric vacuum glass product .

碳化铬硬质合金玻璃成形模

Chromium carbide die for forming glass

碳化铬金属陶瓷临界磨粒尺寸效应的研究应用微机检测磨料粒度组成

An Investigation on Critical Grit Size of Chromium Carbide Cermet Formed by SHS Using Microcomputer to Measure the Grit Size

分析了连续退火炉内热喷涂镍铬碳化铬、钴基高温合金及氧化物陶瓷炉底辊在使用中的涂层脱落、结瘤等问题。

The problems of hearth rolls in continuous annealing furnace with chromium carbide , cobalt-based alloy and others oxides coatings were discussed .

采用碳化铬、镍铬合金、氟化物共晶体和银的复合粉末为原料，通过等离子体喷涂方法制备高温耐磨自润滑涂层。

Self-lubricating wear resistant coating is prepared by plasma spraying using chromium carbide , nickel chrome , fluoride-metal , and silver composite materials .

对比研究碳化铬/Ni3Al复合材料和传统高温耐磨材料Stellite12合金在1000℃时的高温氧化行为。

The oxidation resistance of chromium carbide / Ni3Al composite and conventional high temperature wear-resistant material stellite 12 alloy at 1000 ℃ was investigated comparatively .

为了得到耐磨损的表面涂层，用真空熔烧方法制成与钢基休牢固结合的镍基自熔合金&碳化铬复合涂层。

In order to get a wear resistant surface coating , a vacuum fusion sintering method has been used to make a Ni base self fluxing alloy-chromium carbide composite coating combined solidly with steel matrix .

应用环块磨损试验机，对具有不同碳化铬含量的镍基复合涂层对金属的摩擦副进行了磨损试验。

Using a ring and block wear test machine , the wear resistance tests for Ni base composite coating with different chromium carbide content to metal friction pairs have been carried : out in lubrication sliding .

碳化钨/高铬铸铁复合铸渗层耐磨特性研究

Research on Wear-resistance Property of WC / High-Cr Cast Iron Composite Layer

碳化钨-高铬铸铁表面复合材料耐磨粒磨损性能的研究

Study on the Abrasive Wear Behavior of WC High Chrome Cast Iron Surface Composite

文中对众多的钎料合金，按照钎焊结合的实现原理，分成了两大类，即碳化钛类和碳化铬类，比传统的以合金组分划分显得更为简单而清晰。

It is suggested that the various brazing alloys developed for diamond tools so far can be classified into two types namely TiC and CrxCx according to the bonding bridge between diamond grains .