直接冷却

  • 网络direct cooling;INDIRECT COOLING
直接冷却直接冷却
  1. 唐钢一炼钢厂VD精炼炉直接冷却水系统设计

    Design of direct cooling water system of VD refining furnace for No.1 Steelmaking Plant under Tangshan Iron and Steel Company

  2. 汽轮发电机氢气直接冷却转子的三维温度场计算

    The Three-Dimensional Temperature Field Calculation of Turbogenerator Rotors by Hydrogen Direct Cooling

  3. 35kJ/7kW直接冷却高温超导磁储能系统

    35 kJ / 7 kW Conduction-cooled High T_c Superconducting Magnet Energy Storage

  4. 分析了超导磁储能直接冷却的特点,对G-M制冷机应用于超导磁储能直接冷却进行了方案设计和负荷计算;

    In this paper , we analyzed the characteristic of conduction cool of superconducting magnet energy system . The project design and load calculation is completed for conduction cool of superconducting magnet energy with G-M refrigerator .

  5. 蒸汽直接冷却槽式太阳集热器的传热流动性能研究

    Thermal performance and hydrodynamic analysis of direct steam generation solar collectors

  6. 直接冷却固化法精制对二氯苯研究

    Purification of P - Dichlorobenzene by Direct Contact Cooling Solidification

  7. 直接冷却超导磁储能磁体加载实验与热分析

    Loading experiment and thermal analysis of directly cooled magnet of SMES system

  8. 直接冷却中高温超导电流引线的传热研究

    Heat transfer in the conduction cooling HTSC current lead

  9. 食品加工直接冷却水的循环复用

    Circulation use of direct cooling weter in food processing

  10. 基于直接冷却固化与发汗提纯的熔融结晶研究

    A New Type of Melt Crystallization Technique Based on High-Speed Solidification and Sweating

  11. 直接冷却高温超导电流引线的有限时间热力学分析

    Finite-time Thermodynamic Analysis Of Conduction-cooled HTS Current Leads

  12. 直接冷却半连续铸造铝合金圆锭水冷边界试验研究

    Experimental study of the water cooling boundary of direct chill semicontinuous casting aluminum alloy ingots

  13. 介绍了直接冷却高温超导储能磁体的基本结构。

    The basis components and the experiment of35kJ conduction-cooled high Tc superconducting magnet in China is described .

  14. 介绍了该项工程的规划、工艺技术方案、经济分析、环境评价,经过分析比较,选用直接冷却式低温常压储存加工工艺。

    Through analysis and comparison , the process of direct refrigerating , low temperature and atmospheric storage is selected .

  15. 提出了一种新的基于直接冷却固化与发汗提纯的熔融结晶技术。

    This paper presents a new type of melt crystallization technique based on a combination of solidification and sweating .

  16. 研究了锻后直接冷却及锻后重新加热到720℃水淬后不同时效温度对轿车用同步器齿环组织和性能的影响。

    The microstructure and wear resistance of car synchro converter ring with directly cooling and aging after quenching in 720 ℃ are studied .

  17. 介绍了制冷机直接冷却的35kJ/7kW高温超导磁储能系统电流引线的结构型式,以及它所采用的绝缘、导热截流结构。

    This paper describes the current leads and their electrical insulation & thermal conduction for 35 kJ / 7kW superconducting magnetic energy storage .

  18. 二元电流引线是制冷机直接冷却低温超导磁体系统的关键技术之一。

    The optimization of binary current leads is one of the key technology in the low temperature superconducting magnet system directly cooled by refrigerator .

  19. 将空气制冷机应用于食品的冷冻,是环保和节能的需要,空气制冷的开式回冷低压直接冷却吸热循环方式有许多适应于食品冷冻要求的特性。

    The air-refrigeration in open-mode , cold-quantity reclaim , low-press , direct-cooling air , absorbing-heat cycle have many characteristics to adapt to the food refrigeration requirements .

  20. 在超导系统中,与传统的液体工质冷却超导磁体相比,直接冷却技术具有很大的优越性。

    In the super-conductive magnet system , compared with the use of liquid substance , the conduction cooled technology has great advantages to cool the magnet .

  21. 介绍了开式回冷低压直接冷却吸热循环空气制冷机原理和关键部件蓄冷干燥器的基本工作过程。

    Introduce the principles of open-mode , cold-quantity reclaim , low-press , direct-cooling air , absorbing-heat air cycle and key components of the cold-cumulating and dryness tin .

  22. 研制了中国首台高温超导磁储能直接冷却系统,该系统不使用低温液体(液氦、液氮)。

    The first conduction cooled superconducting magnets energy storage ( HTS-SMES ) magnet system was designed and built without cryogenic liquid ( helium or nitrogen ) in China .

  23. 由于采用了复合交变分离热管原理,吸附制冰机解决了用海水直接冷却吸附床带来的腐蚀等问题。

    In order to solve the problem of corrosion caused by direct cooling of adsorber by seawater directly , the theory of compound alternating separate heat pipe was adopted .

  24. 由于传热机理的变化,在固体接触导热中,界面热阻及其最佳热耦合机理成为直接冷却的关键技术和科学问题。

    The changes of heat transfer mechanism resulted in that thermal boundary resistance and its optimization design have become a key techniques and science problem in directly cooled technology .

  25. 测定原油凝点的方法有国标法、直接冷却法、熔化法和凝点法等四种。

    There are GB method ( the PRC standard ) , direct cooling method , melting method and solidification point method employed to determine the solidification point of modified crude oil .

  26. 通过比较、分析指出了直接冷却法中有机溶剂湿壁捕集法和水-空气捕集法是均苯四甲酸二酐捕集方法的研究和发展方向。

    Through the comparison and analysis it concludes that the direct cooling collecting methods by organic solvent and water-air will be the study and development trends of technologies of collecting pyromellitic dianhydride .

  27. 实验研究表明,控制系统的漏热,优化磁体内部导冷结构,有效减少热传导部件的接触界面热阻是制冷机直接冷却高温超导磁体的关键技术。

    Experimental research shows that the key technology of a conduction cooled magnet depends on controlling heat leak , reducing interfacial thermal resistance and optimizing the conduction cooled structure of the magnet system .

  28. 本文回顾了小型制冷机直接冷却超导磁体系统的发展,结合脉管制冷机的性能特点,设计了用分离型二级脉管制冷机冷却的小型超导磁体低温系统。

    This paper reviews the development of the superconducting magnet system directly cooled by small low-temperature cooler , combined the performance of the pulse tube cooler , a small superconducting magnet system is designed cooled by a separated two-stage pulse tube cooler .

  29. 基于热稳定性分析了导冷结构的优化因素,指出直接冷却导冷结构应强化关键部位(磁体上部)的传热,以减小磁体轴向温差。

    The optimizing factors of the cool-guide structure were analyzed based on the heat stability theory , and it was found that heat transfer of its key part ( at the top of the magnet ) must be strengthened to reduce the axial temperature difference of the magnet .

  30. 但代表生产瓶装水公司的机构称,很多人还是希望能方便地直接购买冷却的或起泡的瓶装水。

    But the body that represents bottled water companies says lots of us still want the convenience of buying it chilled or fizzy .