盐浴炉

  • 网络salt-bath furnace;salt bath furnace
盐浴炉盐浴炉
  1. 盐浴炉石墨组合电极的研制

    Development of Combinatory Graphite Resistor Rod in Salt-Bath Furnace

  2. 耐高温耐熔盐腐蚀无机胶&盐浴炉专用胶的研究与应用

    Study and Application of the High Temperature and Fused Salt Corrosion Proof Inorganic Adhesive , a Special-purpose Adhesive for Salt-bath Furnace

  3. 报道了不同磨削表面粗糙度,PVD-TiN涂层,盐浴炉和直空炉热处理,以及氮化等不同表面状态抗弯试样的抗弯强度数据,并作了相应的解释。

    The bending strengths of specimens with different surface roughness produced by PVD-TiN coating , salt bath and Vacuum furnace heat treatment and nitriding treatment are reported , some comments are given .

  4. 埋入式电极盐浴炉的功率计算

    Calculation of the power of the embeded electrode salt bath furnace

  5. 盐浴炉真实热效率的简易测定法

    The facile measuring method of true calorific efficiency for salt bath

  6. 磁性调压器&盐浴炉的理想电源

    Magnetic voltage regulators & an ideal power supply for salt bath furnaces

  7. 系统能满意地实现对盐浴炉温度的高精度控制。

    High-precision control of salt bath furnace temperature is realized by SDCS .

  8. 十种节能新技术热处理盐浴炉

    Ten New Techniques of Heat Treatment Using Energy Conservation in Salt Bath

  9. 盐浴炉炉体结构的改进

    The improvement on body structure of salt bath furnace

  10. 亚温淬火盐浴炉基盐的选用

    Basic Salt Selection of Subcritical Quenching with Salt Bath

  11. 对单相埋入式电极盐浴炉功率计算公式的商榷

    Discuss on Calculation Formula for Power of Monophase Embeded Electrode Salt Bath Furnace

  12. 盐浴炉快速启动的能质分析与全面节能

    The study of energy quality of quick start salt bath furnaces and energy saving

  13. 45千瓦盐浴炉复合炉衬

    Compound Lining of 45 kw Salt Bath Furnace

  14. 盐浴炉的温度控制系统

    Temperature Control System of Salt-bath Furnace

  15. 高压管件原采用盐浴炉加热整体淬火易变形和裂纹。

    The salt bath quenching of high pressure pipe lead to distortion and cracking in the past .

  16. 以能的质量((火用)平衡)分析盐浴炉的能量平衡。

    By use of energy quality concept , the energy equilibrium of salt bath furnaces is discussed .

  17. 单相电极盐浴炉熔盐电阻计算及电极尺寸设计

    The calculation of melted salt resistance and the design of electrode sizes of single-phase electrode bath furnaces

  18. 通过保角映射,求出单相二极盐浴炉电极间熔盐的电阻。

    Through conformal mapping , the resistance of the melted salt between electrodes in the monophase two-clectrode salt bath furnace is calculated .

  19. 给出了马蹄形电极盐浴炉的功率计算和电极尺寸设计公式。

    The calculation of the power and electrode design of salt bath furnaces with single-phase hoof type electrode are discussed in this paper .

  20. 介绍了电极盐浴炉、箱式电阻炉、真空电阻炉常用修理维护方法。

    This paper briefly introduces some ways of general maintenance for the salt bath electrode furnace , the box resistance furance and the vacuum resistance furance .

  21. 指出,盐浴炉回火,剃齿刀内孔变形小,尺寸稳定性好;

    It is proved that by tempering in salt bath furnace , the deformation of gear shaving cutter is small , and its dimension stability is good ;

  22. 热处理是机械行业的“电老虎”,特别是热效率最低的盐浴炉在热处理用电量中占有相当大的比重。

    Heat treatment process is regsrd as the " high energy consumer " in the machinery industry , especially in the poor efficient furnace of salt bath .

  23. 关于上海市热处理行业淘汰氯化钡盐浴炉的调研报告&贯彻执行原国家经贸委32号令的体会和建议

    Finding Report on Eliminating BaCl_2 Salt Bath Furnace from Shanghai Heat Treatment Trade Realizations and Proposals Concerning the Implementing No.32 Order from the National Original Economy Trade Committee

  24. 盐浴炉专用胶是以酸式磷酸铝为基料、以掺杂高岭石为填料等成分配制成的耐高温耐熔盐腐蚀无机胶。

    The special-purpose adhesive for salt-bath furnace is a high temperature and fused salt corrosion proof inorganic adhesive prepared by taking acid aluminum phosphate as the base stock and kaolinite as filler components .

  25. 本文对钢锯行业热处理车间盐浴炉废气中氢化氰的治理作了调查研究与方案论证。

    The treatment of hydrogen cyanide in the waste gas from the salt bath furnace in the heat treatment shop of steel saw industry has been investigated and its programme has been discussed in this paper .

  26. 介绍了以8031单片机为控制主体的盐浴炉自动温度控制系统。该系统可对3台盐浴炉炉温预置,并分8段进行联控。

    The paper introduces a system which is controlled by 8031 single-board micro - computer and could control the temperature of three salt-bathe stoves automatically and simultaneously in pre-setting temperature and eight segments con - trolling mode .

  27. 本文针对高温盐浴炉热电偶直接测温的腐蚀问题,进行了阴极保护试验,分析了腐蚀速度随保护电流密度的变化关系。

    Aiming at the corrosion problem of thermocouple used in high temperature salt bath furnace , this paper has done an experiment on the cathodic protection . The relation of corrosion velocity and electric current density is analyzed .

  28. 为了改进多功能刺刀生产工艺,提高军品质量,分析了盐浴炉对刺刀体局部软化时产生腐蚀的机理,研究了感应加热回火工艺对刺刀体局部软化效果的影响情况。

    The theory of corrosion caused by salt mediate furnace which lead to the bayonet defect was analyzed and the effects of induction calefaction temper process on softening bayonet were studied , in order to improve productive process of bayonet and the quality of military products .

  29. 新型电加热管式高温盐浴回火炉

    New Type High Temperature Electric Heating Salt-Bath Tempering Furnace

  30. 高温电极盐浴电阻炉高炉矿渣硅酸盐水泥

    High temperature salt bath electrode furnace portland blast-furnace cement