电炉熔炼

传统生产富钛料的方法主要有电炉熔炼法、还原锈蚀法、选择氯化法和酸浸法。

Traditional production methods of rich titanium materials are mainly refer to Electric Smelting Law , Reduction Rust Law , Choice Chlorination Law and Acid Leaching Law .

在模拟反射炉和电炉熔炼冰铜的实验中，用X射线电视装置研究了铜冰铜熔炼时的各种物理现象。

The technique of X-ray radiograph video was used to study the physical phenomena in experiments simulating copper matte smelting in reverberatory or electric furnaces .

5T有芯感应熔铝电炉熔炼铸造铝合金的实践

Practice of 5 Tons Core Induction Furnace for Melting as-cast Aluminum Alloy

在电炉熔炼条件下，采取往铁液中加入FeS增硫的方法，研究和探讨了硫对灰铸铁组织和性能的影响。

The effects of sulphur on the structure and properties of gray iron were studied by adding FeS into melted iron to increase the sulphur content under the condition of induction melting in this paper .

低品位铌精矿二步电炉熔炼Nb-Fe合金

Smelting NB Fe alloy from low and medium grade niobium concentrate by two stage electric furnace process

中频电炉熔炼高强度铸铁的炉前控制

Control of Melting High Strength Casting Iron by Medium Frequency Induction Furnace

碱性感应电炉熔炼低磷硫合金钢的工艺控制

Process Control of Low-Phosphorus and Sulfur Alloy Steel Melting by Basic Induction Furnace

中频感应电炉熔炼灰铸铁抗拉强度与硬度的关系

Relationship between Tensile Strength and Hardness of Gray Irons Melted in Medium-Frequency Induction Furnace

工频电炉熔炼冷硬轧辊的实践与认识

Practice and Knowledge of Chilled Cast Iron Rollers Melted by Main Frequency Induction Furnace

再析直流-空心电极电炉熔炼钛渣的特性硅铁合金电炉除尘系统的自动控制

Further Analyzing on Characteristic of Melting Titanium Slag by DC-Hollow Electrode Electric Arc Furnace

大中吨位变频电炉熔炼铸铁的质量控制

Quality Control of Cast Irons Melting in Large / Medium Tonnage Frequency Conversion Furnace

概述用中频感应电炉熔炼合成铸态铁素体球铁的生产工艺。

The medium-frequency induction furnace melting process of the synthetic as-cast ferrite nodular cast iron was described .

利用中频感应电炉熔炼灰铸铁铁液，水玻璃砂造型，浇注铸造阶梯试样、（？）旋转浇注在铸造生产中的应用

The liquid iron was melted in middle frequency induction furnace . Application of Rotated Mold pouring for Foundry Practice

用电炉熔炼锻造白口铁成本过高，推广应用受到了限制。

The cost of wrought white iron smelted in electric furnace is too high to be used in large quantities .

电炉熔炼钛精矿的热力学讨论简述了工业上制备富钛料常用的几种方法&电炉熔炼法生产钛渣、盐酸浸出法、硫酸浸出法、还原锈蚀法生产人造金红石的原理、国内外生产状况。

The principle and producing situation of three production methods of titanium concentrates & Reduction smelting produces titaniferous slag , Acid leaching and Reductive leaching produce synthetic rutile are depicted ;

本文对感应电炉熔炼条件下，原材料的选择，化学成发的确定，球化及孕育处理工艺进行了分析。

In this paper , the selection of raw materials , the define of chemic ingredient and the process of nodularization and inoculation were analyzed under the condition of electric induction furnace melt .

熔炼技术是生产高品质灰铸铁的关键，无论是用冲天炉还是电炉熔炼，一定要使用高温铁水并采用增碳技术。

Melting technique is one of the most important rings in the production of high-quality iron castings . Whatever using the cupola furnace or electric furnace , the carbureting technique should be used to obtain high-temperature molten iron .

对某高SiO2低CaO铜钴氧化矿电炉还原熔炼的渣型进行了研究。

The characters of slag produced by reductive smelting in arc furnace for treating copper and cobalt ore with high SiO 2 and low CaO content were studied .

红土镍矿电炉还原熔炼镍铁合金的研究红土矿还原生产镍铁熔炼条件的研究

Study on Extracting Ferronickel from Laterite Ores by Electric Furnace Reduction Smelting

中频感应电炉的熔炼特性及操作

Melting Characteristics & Operational Proceeding of MF Induction Furnace

高硅铜钴矿电炉还原熔炼渣型研究

Study on Slag of Reductive Smelting in Arc Furnace for Cu-Co Ore Bearing High Silicon

高钨高铝型锡精矿电炉还原熔炼渣型的研究

Study on the slag constitution about the tin concentrate containing high W and AI reduced-smelting by EF

介绍了刚果（金）钴铜冶炼厂电炉还原熔炼处理钴铜氧化矿工艺的设计特点及生产实践。

This paper describes the designed features and production practice of the process for reduction smelting of cobalt-copper oxide ore by electric furnace in Cobalt-copper Smelter of the Congo ( Kinshasa ) .

介绍了日本冲天炉，感应电炉的铸铁熔炼技术进展。

The progress of cupola and induction furnace melting techniques of cast iron in Japan was introduced .

感应电炉不氧化法熔炼是我国铸造不锈钢生产采用的主要熔炼方法。

The major smelting method used in SS production in China is the non-oxidizable process in an induction furnace .

论述了中频感应电炉的特点，与工频感应电炉熔炼特性的比较及其操作注意事项。

Melting characteristics of MF induction furnace have been expounded with comparison with that of mains frequency induction furnace as well as concerns in operation .

熔锌工频有芯感应电炉熔沟漏锌分析论述了中频感应电炉的特点，与工频感应电炉熔炼特性的比较及其操作注意事项。

The Analysis of Zinc Smelting Seepage from Furnace Lining for Induction Furnace Melting characteristics of MF induction furnace have been expounded with comparison with that of mains frequency induction furnace as well as concerns in operation .