环氧树脂基复合材料

环氧树脂基复合材料环氧树脂基复合材料
  1. 炭黑/二氧化硅/环氧树脂基复合材料的PTC效应

    PTC effect in carbon black / silica loaded epoxy resin

  2. 本文研究了温度与外加应力因素对碳纤维增强环氧树脂基复合材料在NaCl水溶液中吸湿行为的影响规律。

    The effect of temperature and external stress on the moisture absorption behavior of graphite epoxy composite material in NaCl solution is studied in this paper .

  3. 利用INSTRON实验机和落锤装置对圆筒形碳纤维增强环氧树脂基复合材料结构进行了静、动态压缩实验。

    Cylinder structure of carbon fiber reinforced epoxy resin matrix composite material is compressed by INSTRON and drop weight experimental equipment .

  4. 用化学镀工艺在碳纳米管表面均匀包覆了Ni-P和Ni-N合金,研究了它们的磁性能及其环氧树脂基复合材料在2~18GHz的微波吸收性能。

    The Ni-P and Ni-N alloy coatings on the carbon nanotubes were deposited by electroless deposition technique . The magnetic property of Ni-P and Ni-N alloy coated carbon nanotubes and the microwave absorbing property of their composites at 2 ~( 18 GHz ) were investigated .

  5. 环氧树脂基复合材料表面金属化处理及其性能探讨

    On Metallized Treatment of Epoxy Resin Composites Surface and Its Performance

  6. 有机海泡石增强高性能环氧树脂基复合材料的研究

    Study on High-Performance Epoxy Resin Based Composite Reinforced by Organic Sepiolite

  7. 连续玄武岩纤维增强环氧树脂基复合材料抗冲击性能研究

    Impact resistance properties of continuous basalt fiber reinforced epoxy resin composites

  8. 无机纳米粒子/环氧树脂基复合材料的研究现状

    Research Advances in Inorganic Particles / Epoxy Matrix Nanocomposites

  9. 环氧树脂基复合材料抗冲蚀磨损特性研究

    Properties of Abrasion Resistance of Epoxy Resin Based Composites

  10. 纳米炭黑环氧树脂基复合材料应变和裂缝感知特性研究

    Epoxy Matrix Composites Filled with Nano-Carbon Black and Their Strain and Crack Monitoring

  11. 水性环氧树脂基复合材料的耐酸碱性能

    The acid and alkali resistance of the composite prepared from waterborne epoxy resin

  12. 镀钴碳纳米管/环氧树脂基复合材料的制备及其微波吸收特性研究

    Electroless Plating Preparation and Microwave Absorbing Properties of Co-Coated Carbon Nanotubes / Epoxy Composite

  13. 碳纤维增强环氧树脂基复合材料的性能研究

    Study on performance of composite material based on epoxy resin reinforced by carbon fiber

  14. 热塑性酚醛树脂对碳纤维环氧树脂基复合材料性能的影响

    Effect of thermoplastic phenolic resin on properties of carbon fibers reinforced resin matrix composites

  15. 湿热老化对碳纤维/环氧树脂基复合材料力学性能影响研究

    Study of Hydrothermal Aging Effect on Mechanical Properties of Carbon Fiber / Epoxy Resin Composites

  16. 利用超声波和偶联剂处理的方法,制备了纳米微粒填充环氧树脂基复合材料。

    Three kinds of nanoparticles were efficiently dispersed into the epoxy resin by using coupling agents and ultrasonic wave .

  17. 环氧树脂基复合材料直升机部件性能分析基于飞行状态的直升机部件使用费用分析

    Application of Epoxy Matrix Advanced Composites in Helicopter Research on Operation Cost of Helicopter Components Based on Flight Condition

  18. 研究了含有谐振子和损耗介质的环氧树脂基复合材料对电磁波的反射与吸收效应。

    The microwave reflection and absorption effects in epoxy matrix composite ma-terials containning lossy substances and nickel coated carbon fiber resonator have been studied .

  19. 人们改善环氧树脂基复合材料的脆性通常只改善环氧树脂基体和增强纤维间的界面。

    Usually studies concerning the improvement of fracture resistance of epoxy based matrix composites only focus on the improvement of the interface epoxy matrix and fiber .

  20. 为了克服环氧树脂基复合材料耐磨性和耐热性较差的问题,本文采用喷涂技术,在其表面制备了陶瓷防护涂层。

    In order to overcome the poor wear resistance and thermal resistance of epoxy polymer matrix composite ( EPMC ), ceramic protecting coat was produced by thermal spray technology in this thesis .

  21. 短碳纤维是一种重要的复合材料增强体,短碳纤维增强环氧树脂基复合材料由于成本低廉以及良好的加工成型性,在国民工业各领域得到广泛的应用。

    Short carbon fiber ( SCF ) is an important reinforcement . Due to the low cost and good formability , short carbon fiber reinforced epoxy composites are widely used in various fields .

  22. 为了满足传感器的使用要求,本文以玻璃纤维增强环氧树脂基复合材料薄膜作为传感器应变片的基底材料。

    A study of milled glass fiber reinforced composites used as the strain gage backing material is present in this paper , which made it suitable more well for the demands of load cell .

  23. 主要介绍碳/环氧树脂基复合材料中纤维的不均匀度、含胶量及固化工艺参数(压力、温度、时间等)对复合材料壁板厚度的影响。

    This paper introduces mainly the effect of non-uniformity of carbon-fibers and ratio of epoxy weight and solidified technology parameters ( pressure , temperature and time etc. ) on the thickness of carbon / e-poxy composite .

  24. 通过对瞬时临界荷载与持久临界荷载的分析,以硼纤维环氧树脂基复合材料为例,揭示了粘弹性层合板和层合圆柱壳在蠕变荷载下的延迟失稳机制。

    By the investigation of instantaneous critic loads and durable critic loads , the mechanism of creep buckling of boron fiber / epoxy matrix laminated plates and boron fiber / epoxy matrix cylindrical shells exhibiting viscoelastic behavior is revealed .

  25. 本文采用单丝拔出试验和动态力学分析研究了环氧树脂基复合材料中基体与竹节状有机短纤维之间的界面特性。

    The interfacial properties of the epoxy matrix and slub like organic short fiber have been investigated in this paper . The adhesion strength is measured by means of single fiber pull out test and dynamic mechanical analysis ( DMA ) .

  26. 在模拟渣浆泵叶轮的工况条件的试验装置中,对比测试了高铬铸铁、环氧树脂基复合材料和聚氨酯弹性体3种耐磨材料的冲蚀磨损性能,讨论了它们的磨损机理。

    Comparative testing of the erosion wear performances of three wear resisting materials , i.e , high chromium cast iron , epoxy matrix composite and polyurethane elastomer made in a testing device simulating the operational conditions of a slurry pump impeller is described and their wear mechanism discussed .

  27. 介绍了环氧树脂基纳米复合材料的制备方法、性能、作用机理及研究进展。

    Recent research advances in fabrication methods , the properties and the function mechanism of the epoxy resin-based nanocomposites were introduced in this paper .

  28. 环氧树脂基复合型导电材料制备工艺研究

    Study on Preparation Process of Epoxy Resin ( EP ) Conducting Composites Material

  29. 环氧树脂基无机纳米复合材料的开拓

    Developments of epoxy resin - inorganic nanocomposites

  30. 最后,本文对碳纳米管/环氧树脂基复合吸波涂层材料进行了研究,探讨了碳纳米管复合吸波涂层材料的吸波机理。

    Finally , the carbon nanotubes / epoxy group compound microwave absorbing material was analyzed and its microwave absorbing mechanism was discussed .