熔炼

róng liàn
  • smelt;smelting;fusion;metallurgy
熔炼熔炼
熔炼 [róng liàn]
  • [smelt] 熔化冶炼

熔炼[róng liàn]
  1. 区域熔炼法制备高纯度金属

    Making the Metal in High Solidification by the Way of Regional Smelt

  2. 在高炉中熔炼铁矿石,可取得铁。

    To smelt iron ore in a blast furnace can obtain iron .

  3. 达比一直在寻找改善铁质的方法,他猛然想到可以不用木炭熔炼,而改用焦炭。

    Darby was looking for a way to improve iron when he hit upon the idea of smelting it with coke instead of charcoal .

  4. 主要论述了锰黄铜熔炼工艺设计及熔炼过程。

    This paper briefly expounds the technological design and smelting process of ZCuZn40Mn3Fel .

  5. 介绍一种环保型喷嘴燃油熔铜反射炉,利用炉盖式套管提升机构实现封闭式熔炼。

    A kind of environmental protection fuel melting copper reverberatory furnace with spray nozzle is introduced .

  6. Ni基高温合金真空感应熔炼脱硫

    Desulphurization during VIM of Ni-base superalloy

  7. 真空感应熔炼过程中微量Bi的挥发

    Evaporation of Trace Bismuth during Vacuum Melting of Steel

  8. CaO坩埚的研制及其在真空熔炼超低氧钢中的应用

    Development of calcia crucible and its application in vacuum refining ultra-low oxygen steel

  9. 铝合金熔炼加Zr新工艺

    New Process of Adding Zr to Molten Aluminium Alloy

  10. 熔炼法制备的AB5-AB2复合合金的晶体结构和电化学性能

    Crystal Structure and Electrochemical Characteristics of AB_5-AB_2 Composite Hydrogen Storage Alloys Formed by Melting Process

  11. 采用真空电弧炉熔炼及吸铸方法制备TiZrCo/Fe三元准晶合金系样品,对吸铸前后样品中存在的相进行了比较。

    The ternary alloys Ti Zr Co / Fe is prepared by vaccum arc smelting and suction casting .

  12. 悬浮熔炼-铜模吸铸法制备Cu(50)Zr(42)Al8块状金属玻璃

    Preparation of bulk metallic glass Cu_ ( 50 ) Zr_ ( 42 ) Al_8 by means of suspend melting-copper mold suction casting

  13. 利用真空自耗电弧熔炼法制备了三种成分的Nb硅化物基超高温合金。

    Three Nb-Si based ultrahigh temperature alloy ingots with different nominal compositions were prepared by vacuum consumable arc-melting .

  14. 一种新型的高强高导兼顾的铜合金材料&CuAgZr合金,采用真空熔炼的方法制备。

    A new high-strength and high-conductivity copper alloy & Cu-Ag-Zr alloy were produced by means of a vacuum induction furnace .

  15. 对Mg-Li基合金制备所用原材料、熔炼设备及工艺,以及Mg-Li基复合材料的制备工艺进行了总结和分析。

    The raw materials , melting devices , melting and pouring technique for Mg Li alloys and the fabricating technology of Mg Li matrix composites were summarized .

  16. 本文从实验角度对一种新型保护气体C2H2F4在镁及镁合金熔炼中的保护效果、保护机理进行了研究。

    This paper studies protective results and protective mechanisms of a new kind of protective gas C_2H_2F_4 experimentally .

  17. n型Bi2Te3基热电材料的熔炼温度是620℃,最佳的烧结温为是400℃。p型Bi2Te3基热电材料的熔炼温度是700℃,最佳的烧结温度为470℃。

    The melting temperature of n-type Bi_2Te_3 based thermoelectric material is 620 ℃, the best sinter temperature is 400 ℃ and they are 700 ℃ and 470 ℃ for p-type .

  18. COREX流程熔炼煤的选择

    Selection of smelting coal for COREX process

  19. 熔炼焊剂SSF的研制与应用

    Development and application of fused flux SSF

  20. 对某高SiO2低CaO铜钴氧化矿电炉还原熔炼的渣型进行了研究。

    The characters of slag produced by reductive smelting in arc furnace for treating copper and cobalt ore with high SiO 2 and low CaO content were studied .

  21. 熔炼AZS材料的电弧炉炉底料的研究

    A Study on the Residual Block of Electric Arc Melting Furnace for AZS Refractories

  22. 采用高频感应加热快速熔炼、低模壳温度稳速浇注工艺铸造出一批TiAl增压器涡轮。

    A novel method was employed to cast TiAl turbocharger wheels with vacuum high frequency induction heating , low temperature of mold shell and smoothly filling .

  23. 研究了熔炼所得Zn-Fe合金在3.5%NaCl溶液中的腐蚀电化学行为。

    The electrochemical behavior of corrosion of smelted zinc iron alloys in 3.5 % NaCl solution was studied .

  24. 设计并采用激光熔炼工艺制备出镍基固溶体γ增韧的Mo2Ni3Si三元金属硅化物合金。

    γ - Ni toughened Mo_2 Ni_3 Si ternary metal silicide alloy was designed and fabricated by the laser melting deposition process .

  25. 真空自耗电弧熔炼制备Cu-Nb合金

    Preparation of Cu-Nb alloys by a vacuum consumable arc casting

  26. 利用高频感应电炉,采用平衡制备技术-熔炼铸造方法制得的Fe-Al系金属间化合物具有较高的硬度值,且组织致密。

    By use of high-frequency induction furnace and equilibrium preparation - foundry method , the Fe - Al intermetallic compound has higher hardness and density .

  27. 结果表明:电弧熔炼法可以制备出组织均匀、颗粒小、性能优良、致密度高的CuCr假合金。

    The results showed that CuCr alloy fabricated by arc has well distributed structure and fine grain and good properties and high density .

  28. 艾萨熔炼法是芒特艾萨矿业有限公司(MIM)和澳大利亚联邦科学工业研究机构(CSIRO)联合开发的浸没式喷枪顶吹熔炼技术,是一种高强度有色金属冶炼方法。

    The Isa smelting process , a submerged lance top-blown smelting technology jointly developed by MIM and CSIRO is a high-intensity nonferrous smelting process .

  29. ZL104合金中的含气量在熔炼过程中的变化及其影响

    The Variety of Gases Content in the Alloy ZL104 ′ in Melting Process and Its Effect

  30. 采用真空中频感应熔炼、电弧熔炼和高频感应熔炼辅助3m落管无容器快速凝固方法,制备出镍石墨两相自润滑合金。

    Self-lubricating two-phase Ni-graphite alloy was produced by methods of vacuum medium-frequency induction melting , arc melting and containerless rapid solidification process of 3m drop tube assisted by high-frequency induction melting .