熔模铸造

铝合金U形支架熔模铸造

Investment Casting for Aluminum Alloy U Support Frame

铸造CAE技术在熔模铸造中的应用

Applications of Foundry CAE on Investment Casting

跨平台熔模铸造工艺工装CAD

Moulding Tool and Technology CAD in Investment Casting

熔模铸造工艺CAD

CAD of Investment Casting Process

因此，在熔模铸造球铁时，应选用不含V、Ti的低硫、低磷生铁。

Therefore , in the investment casting , pig iron of non-v , Ti and low sulphur and phosphorous should be chosen .

TiAl基合金熔模铸造缺陷的研究

Study on Investment Casting Defects of TiAl Alloy

SLS模料特性及熔模铸造工艺研究

Pattern-properties of SLS and Investment Casting MODULE BUNDLES RICHART MODULES

介绍用SLS技术制造熔模铸造型芯的方法与技术关键。

The method to make investment casting cores using SLS technique is studied .

为精确地预测熔模铸造中新零件材料消耗定额，采用了BP神经网络的方法进行建模。

In order to precisely predict the material consumption of new parts in investment casting , BP neural network method is used to establish a prediction model .

研究了微合金化元素RE、Ti和不同的热处理工艺对熔模铸造高强度贝氏体铸钢组织的影响。

Effects of trace alloying element RE , Ti and different heat treatment methodes on microstructure of high-strength bainite casting steel in investment casting were researched .

LOM原型在熔模铸造中的应用

Application of LOM Prototype in Investment Casting

给出了利用RP技术制造非金属原型的工艺流程，介绍了无模具熔模铸造箱体铸钢件的工艺过程。

The processing procedure of prototype making by rapid prototype and the production process of cast steel box without wax pattern in investment casting were described .

在熔模铸造壳型内表面基体玻璃涂层上制备了两类无裂纹SiO2薄膜涂层。

Two groups of SiO 2 thin film coatings without cracks are prepared on the glassy coating of inner surface basic body in the investment casting mold .

因此，制备性能优良的用于Nb-Si基合金熔模铸造的陶瓷型壳则变得至关重要。

Therefore , it is important to prepare investment casting ceramic shell mold used in Nb-Si based alloy .

熔模铸造条件下ZL111熔炼工艺的研制

Research and Production of ZL 111 Melting Process in Investment Casting

通过对高强度型壳制造、SLA树脂原型性能较全面详细的研究，为建立合理的熔模铸造脱模工艺提供了充实的实验基础。

In addition , through a thorough research on the preparing process of high-strength shell and the properties of SLA resin prototype , a solid experimental basis has been provided for establishing a proper investment casting process of removing patterns from shells .

作者分析了熔模铸造企业的质量控制现状，借鉴统计过程控制（SPC）的理论，对熔模铸造产品的工序质量数据进行采集分析，并进行相应的工序能力判断。

Analyzing the characteristics of quality management in the investment casting enterprises and using Statistical Process Control for reference , a series of quality data of working procedures are collected and analyzed , and the judgments of process capability are concluded .

涡轮导向器是在研某型号航天发动机的关键部件，采用K465铸造高温合金无余量整体熔模铸造而成。

The nozzle , which is cast in K465 cast superalloy by investment casting , is one of the key components of the airspace engine .

基于钴基合金Co20的主要成分，采用双真空冶炼和熔模铸造，试制了铸坯加热炉用钴合金耐热垫块。

Based on the main composition of Co-based superalloy Co-20 , Co-based alloy pillow block for slab heating furnace is manufactured by means of double vacuum smelting and investment casting .

本文以真空熔模铸造K417镍基高温合金涡轮叶片为研究对象，用宏观传热、传质与微观形核、生长相统一的数学模型，描述了微观组织形成的动态过程。

Dynamic process of microstructure formation was presented for Ni based superalloy turbine blade castings produced by investment casting under vacuum . A mathmatical model which couples macroscopic heat transfer and solute transfer with the kinetics of microscopic nucleation and growth was developed .

熔模铸造硅溶胶模壳制造工艺

Investigation of Technics Manufacturing Colloidal Silica Shell Mould in Investment Casting

磷酸氢二钠改性水玻璃在熔模铸造中的应用

Application of Sodium Silicate Binder with Na_2HPO_4 Modifier to Investment Casting

介绍了五台山铜塔铸造工艺，由于其结构特殊，故采用了3种工艺分别铸造而成：细砂湿模造型、树脂砂毁模贴皮造型和熔模铸造。

Casting process of copper tower for Wutai mountain was introduced .

熔模铸造高强度模壳的研究

A Study of the High Strength Shell Mould of Investment Casting

熔模铸造模料本构方程的建立及其应用

Establishment and Application of Constitution Equation on Investment Casting Wax Stock

熔模铸造金属与型壳界面作用的研究

Study on Metal - Ceramic Shell Interface Reactions in Investment Casting

改善熔模铸造壳型壁厚均匀性的一种途径

A New Way Improving Identity of Mould Thickness for Investment Casting

钛合金熔模铸造粘结剂&二醋酸锆的制备方法

Method of Preparing Titanium Alloy Investment Casting Binder ── Diacetatozirconic Acid

耐热钢托盘熔模铸造工艺及缺陷的防止

Investment Casting Technology of Heat-Resistance Tray and Prevent of Defective

熔模铸造水玻璃型壳溃散性的研究

Study on the Collapsibility of Sodium Silicate Shell Mould in Investment Casting