热轧带钢

  • 网络hot strip;hot-rolled strip;Hot rolled strips;hot rolled steel strip
热轧带钢热轧带钢
  1. 热轧带钢头部翘曲原因分析

    Reason for Curling at Front End of Hot Rolled Steel Strip

  2. 950热轧带钢E1立辊轧机优化改进

    The introductions and optimization improvements of 950 hot rolled steel strip rolling mill E1

  3. 热轧带钢卷取温度的H∞鲁棒控制

    H_ ∞ robust control for coiling temperature in hot rolling processing

  4. 热轧带钢卷取机PLC控制系统分析

    Analysis of PLC Control System for Hot rolling Strip Roller

  5. 模糊自整定PID参数控制器用于控制热轧带钢卷取温度

    Hot Strip Coiling Temperature Control Based on Fuzzy Self-Adjustable PID Parameter Controller

  6. 线阵CCD用于热轧带钢头部形状检测

    Detecting the Shape of Hot Strip Head Area with Linear CCD

  7. Ti含量对热轧带钢组织和力学性能的影响

    Influence of Titanium Content on Microstructure and Mechanical Properties of Hot-roHed Strips

  8. 本文将线阵CCD用于热轧带钢头部形状检测,提出空间坐标对应概念;

    Linear CCD used in detecting the shape of hot strip head area is discussed in this paper .

  9. CSP热轧带钢表面质量缺陷的攻关

    The resolution of CSP heat rolling strip steel surface quality defect

  10. 热轧带钢工作辊在线研磨装置(ORG)的研究

    Study on On-line Grinding Device of Working Roll for Hot Rolled Strip Steel

  11. 根据引起热轧带钢产品厚度波动的主要原因,提出基于轧件塑性系数变化的Q预测前馈AGC方法。

    Aiming at the main factors causing thickness fluctuation of hot strip , this paper presents a Q prediction feedforward AGC strategy considering the influence of plasticity coefficient changes .

  12. 热轧带钢轧机自动宽度控制(AWC)系统设计与实现

    Design and Realization of Automatic Width Control in Hot Strip Milling

  13. 1.5t热轧带钢无芯卷取机的设计要点

    Design Feature for Hollow Reel of Hot-rolled Strip

  14. 针对热轧带钢头部和尾部温度偏差较大的情况,将模糊自整定PID参数控制器用于控制热轧带钢卷取温度。

    As the temperature deviation at leading end and tail of the hot strip is larger than other parts . The fuzzy self adjustable PID parameter controller can be used to control hot strip coiling temperature .

  15. 热轧带钢失宽模拟及其在AWC中的应用

    Simulation of Width Reduction and Its Application to AWC of Hot Strip Mill

  16. 使用VAI-QStrip系统首次实现热轧带钢力学性能的全面控制

    For the first time ever : full metallurgical control of the mechanical properties of hot-rolled strip with vai-q strip

  17. SPA-H热轧带钢生产工艺

    Process System of SPA - H Hot - strip

  18. 其直接加热、大压下量轧制、机架间控制冷却和冷床上的控制冷却技术使得热轧带钢的力学性能与传统的热轧带钢(CCR)相比有明显的优越性。

    The process methods of direct heating , large reduction rolling and cooling between stands and in the cooling bed give hot-rolled strip superior mechanical properties compared with traditional process .

  19. 莱钢1500mm热轧带钢过程自动化系统

    Process automation system for Laiwu Steel 1500 mm hot strip mill

  20. GCK-1型热轧带钢在线测宽仪的生产应用

    Application of GCK-1 type on-line width gauge to production

  21. CSP工艺浇铸区域特有的冶金条件及其直接装炉、轧制、冷却的工艺方法导致热轧带钢晶粒细、强度高、塑性好。

    The specific metallurgical condition of the CSP casting area and the process methods of direct charging , rolling and cooling give the results of fine crystal grain , high strength and good plastic to the hot rolling strip .

  22. 简要介绍了轧辊制造新技术&复合碳化物强化技术(CCR),采用该技术生产的热轧带钢连轧机工作辊的轧制量比合金无限冷硬轧辊提高25%,是提高工作辊使用寿命的新途径。

    The new manufacture techology of complex carbide reinforcement for work roll of hot strip rolling mill are briefly introduced . The rolling capacity can be increased more 25 % than alloy chilled cast iron roll .

  23. 本次研发的30T翻卷过跨车,是典型的机电一体化产品,它除了具有翻卷功能外,还具有运输钢卷的功能,并将成为很便利的冷、热轧带钢车间生产工具。

    The30T coiling cross-train of the paper is a typical mechatronic products , it has not only coiling function but also transport , and will become a convenient tool .

  24. 热轧带钢粗轧Ⅰ机架C9-1半钢轧辊的开发应用

    The Development & Application of the Semi-steel C9-1 Roll for Hot-strip Roughing Mill Stand ⅰ

  25. 使用该凸度仪实现了对热轧带钢横断面厚度的高分辨率快速测量,横断面厚度测量区域分辨率达5mm,响应时间达10ms。

    The profile gauge can fast measure the thickness of transverse section of hot rolled strip , high measuring resolution is 5 mm and response time is ( 10 ms ) .

  26. VAI-QStrip(热轧带钢综合质量系统)是一种独特的计算机辅助质量控制系统,已在奥钢联林茨钢厂7机架热带轧机上成功实施。

    VAI Q Strip ( VAI 's Integrated Quality system for hot rolled strip ), a unique computer aided quality control system , has been implemented at the 7 stand hot strip mill of VOEST ALPINE Stahl Linz .

  27. 热轧带钢负荷分配目标厚度函数法

    Thickness Target Function Method for Load Distribution During Hot Strip Rolling

  28. 带卷箱技术在热轧带钢轧机上的应用

    Application of the coil box technology in hot strip rolling mills

  29. 基于模糊控制技术的热轧带钢卷取温度控制

    Coiling Temperature Control of Hot Strip Steel Based on Fuzzy Technology

  30. 单位宽度轧制力对热轧带钢凸度的影响规律

    Effect of Unit Width Rolling Force on Hot Rolling Strip Profile