热壁加氢反应器

无堆焊衬里热壁加氢反应器的H2S腐蚀

H_2s corrosion of hot wall hydrogenator without cladding

本文针对大型热壁加氢反应器现场焊后局部热处理技术进行了研究，研究结果为厚壁（≤250mm）加氢反应器在现场组装提供可靠的局部热处理技术和设备。

In this paper the postweld local heat treatment technology of large heat-wall hydrogenation reactor after site welding is studied . The results provide reliable local heat treatment technology and equipment for thick-wall (≤ 250mm ) hydrogenation reactor after field assembly .

热壁加氢反应器运行过程中的材质劣化问题

Problems of mateial deteriotation during operation of hot wall hydrogenated reactor

热壁加氢反应器运行安全问题及其保障技术

Safety Problems of In - service Hydrogenation Reactor and Their Safeguard Technology

组合薄内筒绕带式热壁加氢反应器的工程应用分析

Engineering Application Analysis of Unique Ribbon Wound Hot-Walled Hydrogenation Reactor

热壁加氢反应器的制造和检验（二）

Fabrication and Examination for Hot-wall Hydrotreating Reactor ( 2 )

在用热壁加氢反应器的检验和安全分析

Inspection and Failure Analysis of In - Service Hydrogenation Reactor

400吨锻焊结构热壁加氢反应器研制

Development of 400 Ton Hydro-reactor with Hot-wall of Forging and Welding Structre

热壁加氢反应器堆焊层表面裂纹扩展初析

First frost The Study of Surface Cracks Ream on Overlay of Hydrogenation Reactor

热壁加氢反应器的现场组焊技术

Site Welding Technology on Hot Wall Hydrogenation Reactor Vessel

国产热壁加氢反应器的失效分析与安全保障

Invalidation Analysis of Homemade Hydrogenation Reactor with Hot Wall and Its Safety Safeguard

在用热壁加氢反应器的无损检测

The Nondestructive Detection on the Hot Wall Hydrogenation Reactors

热壁加氢反应器材料及焊接技术

Shell and weld material of hot wall hydrocracking reactor

在用热壁加氢反应器外壁超声波检测工艺试验和研究

Technology Test and Study of Outside Ultrasonic Testing for Inservice Hot-wall Hydrogenation Reactor

国产热壁加氢反应器运行安全性评估

Evaluation on safety of domestic hot-wall hydrogenation reactor

炼油热壁加氢反应器用超纯净焊材用钢

Ultra-High Clean Steel as Weld Materials for High Temperature Hydrogenated Reactor of Petroleum Refinery

关于热壁加氢反应器不锈钢堆焊层检验方法的探讨

Study on Inspection Methods of Hot Wall Hydrogenation Reaction Chamber Stainless Steel Repair Welding

热壁加氢反应器堆焊层裂纹的检测与监测

Monitor and detection of the cracks in the bead welding in HEAT-WALL HYDROGENATION REACTOR

我国热壁加氢反应器技术实力与下世纪发展建议

Technology of Chinese hot wall hydroprocessing reactor and suggestions on its development in 21st century

热壁加氢反应器是炼油与煤液化工程的关键设备。

Hot wall hydroprocessing reactor is the key equipment in oil refinery and coal liquefied .

大型热壁加氢反应器现场焊后局部热处理技术研究

A Study on Postweld Local Heat Treatment Technology of Large Heat-wall Hydrogenation Reactor after Site Welding

热壁加氢反应器螺栓孔内空气环层传热的简化计算方法

Calculation method for the heat transfer of annular air gap in bolt holes of hydrogenation reactor

详细介绍了我国首台自制热壁加氢反应器高温运行状态实测应力的结果。

Stress measurement and analysis results of hot-wall hydrogen reactor are reported in this paper in detail .

介绍了对一台热壁加氢反应器进行开罐检验的有关方法和技术要求。

This paper introduced the relative inspection method and technology for heat-wall hydrogenation reactor that have been put forward .

总结了我国自行研究、设计、制造的首台锻焊结构热壁加氢反应器成功安全运行10年的经验。

Ten year experience of successfully running of the first forge welding hot-wall hydrogenation reactor made in China was summarized .

在用热壁加氢反应器焊缝和层下裂纹的超声检测

Ultrasonic detection of the cracks in the welded seams and under the overlaid claddings of the hydrogenation reaction chambers in use

热壁加氢反应器在线红外热像检测与安全评定热流道系统的温控安全保护装置

A Software System to Estimate the Remaining Life for Hydrocracking Tower on Line with Infrared Image Protective control of hot-runner systems

热壁加氢反应器是炼油工业加氢裂化装置中的关键核心设备，制造工艺复杂，技术难度大。

The hot wall hydrogen reactor which has complicated manufacture process and needs high technology is a key equipment of hydrocracking apparatus in refinery .

文章对这些导致反应器失效的问题作了概要分析和讨论，着重从生产管理上对国产热壁加氢反应器的保障技术进行了探讨。

Various factors leading to the reactor failure were analyzed and discussed and safeguard of hot-wall hydroprocessing reactor was explored in respect of production management .

我国锻焊结构热壁加氢反应器技术的进步&纪念首台国产化热壁加氢反应器诞生10周年

TECHNICAL PROGRESS IN DOMESTIC FORGE WELDING HOT-WALL HYDROGENATION REACTOR ── The 10th Anniversary of the Birth of the First Domestic Forge Welding Hot-Wall Hydrogenation Reactor