热流道模具

  • 网络Hot runner mold;hot runner mould
热流道模具热流道模具
  1. 详细讨论了热流道模具熔体泄漏的主要原因,从操作工艺、热流道系统密封设计和热流道板装配工艺等3个方面介绍了防止熔体泄漏的措施。

    The leakage reasons of molten plastics for hot runner mold are discussed in detail , the methods of preventing leakage are introduced from operation processing , seal design of hot runner system and assembly process of hot runner plate .

  2. 热管技术原理及其在热流道模具中的应用

    Principle of heat pipe technology and its application in hot runner mould

  3. CD包装盒叠层式热流道模具设计

    Design of Double-level Hot Runner Stack Injection Mold for CD Case

  4. 基于微处理器的热流道模具精密温控仪研制

    Design of temperature controller based on the microprocessor for hot runner mould

  5. 采用先进的热流道模具设计,工艺调节方便;

    Thanks for advanced mould with hot-runner , easy to adjust technology .

  6. 浅析热流道模具中外加热式喷嘴的径向热传导问题

    Analysis of Radial Heat Conduction in the External Heated Nozzles of Hot-Runner Moulds

  7. 新型叠式热流道模具的设计

    Design of the newfashioned hot runner Stack Injection Mold

  8. 热流道模具的喷嘴设计

    Design of Nozzle for Mould with Hot Flow Channel

  9. 国外热阀浇口式探针系统热流道模具现状

    Current situation of hot-runner molder of hot valve gate spear system in foreign countries

  10. 利用叠层式热流道模具可以实现人力与设备的节省、效率的极大提高和制品质量的稳定。

    The application of hot runner stack mold will spare the labor and equipment , raise the efficiency and stabilize the quality of products .

  11. 本公司专业设计、制造各类塑胶模具、热流道模具和锌、铝合金压铸模具。

    The company specializes in the design , manufacture various types of plastic molds , hot runner molds and zinc , aluminum die-casting molds .

  12. 详细介绍热流道模具浇注系统结构设计和尺寸计算、热流道板加热功率计算、热流道板线膨胀量计算及在设计时应注意的一些问题,并介绍了一种二级脱模机构。

    The structure design and the calculation of the sizes , heating power , linear swell value of hot runner system were discussed in detail . A two-step demoulding mechanism was also introduced .

  13. 介绍了扩散焊接技术在热流道模具分流道板和注射模型芯制造中的应用,采用该技术,可优化型芯结构,缩短成型时间,提高塑件质量。

    The application of diffusing welding technology in manufacturing the runner plates of hot_ runner moulds and the cores of injection moulds was introduced . By adopting the technology , it could optimize the core structure , shorten the moulding time and increasing the plastic parts quality .

  14. 基于UG的减速器斜齿轮热流道注塑模具设计

    Designing of the Hot Runner Injection Mould for Reducer Gear Part Based on UG

  15. 介绍了PP纸巾盖热流道注射模结构设计,并以纸巾盖为例分析了热塑性塑料热流道注射模具结构及优点。

    The hot runner injection mold structure design of PP tissue cover is introduced , and taking tissue cover as an instance , injection mold structure of the thermoplastic hot runner and its advantages are analyzed .

  16. 周转箱塑件热流道注射模具设计

    Design of Injection Mold with Hot Runners for Plastics Turnover Boxes

  17. 热流道塑料模具设计

    Thermal Run System for Plastic Mold

  18. 就热流道注射模具,根据塑件形状不同,分析了熔体在等温流动和非等温流动时,流经不同位置时的压力损失。

    According to the different shapes of plastic parts , an analysis was made on the pressure loss at different position when melt plastics flowing in the hot_runner injection mould under isothermal and non_isothermal conditions .

  19. 介绍ABS圆盒盖单浇口热流道注射成型模具,进行了注射成型试验。

    This paper introduces the design of the single-gate injection mold for ABS caps with hot runner .

  20. 热流道精密成型模具的研究

    Study on the Precision Hot - Runner Mould

  21. 薄壁HDPE桶用热流道点浇口式模具

    Pin - Point Gate Type Hot - runner Mould for Thin Wall HDPE Buckets

  22. 热流道技术是注塑模具成形过程中的一项先进应用技术。

    The hot-runner technology is an advanced & applied technology in process of forming of an injection mold .

  23. 采用热流道浇注系统使模具结构由三板式结构改为两板式结构,模具结构进一步得到优化。

    The mould structure is changed from three times parting planes to two times parting planes by using hot runner gating system , and the mould structure is optimized further .

  24. 介绍了热流道系统技术计及热流道产品在注塑模具设计中的应用。

    Hot runner system technology and the application of hot runner on the design of plastic mold .

  25. 详细介绍了热流道塑料模具设计方法,热流道系统的分类,不同热流道系统的模具结构的区别,应用热流道系统的经济性。

    The design method and how to assort to thermal run system of plastic mould is introduced in detailed . The difference of die structure of thermal run system and economical efficiency is also described .