混杂纤维复合材料

对于多分支整体异形空心薄壁断面混杂纤维复合材料自行车车架，由于复杂的空间曲面构形和纤维铺设连续性要求成为其CAD技术难题。

Due to the requirements of complex configuration of spatial curved surfaces and of continuity of fiber laying have becoming a difficult problem in CAD technology for bicycle body frame of hybrid fibered compound material with multi-branch special shaped entire-body and sections of hollowed thin wall .

特别指出，大试件才能体现混杂纤维复合材料（HFRP）的“塑性”。

It is emphasized especially that only large specimens can display the plastic property of hybrid fiber reinforced polymer ( HFRP ) .

混杂纤维复合材料混杂效应的理论估算与实验

The estimation and experiment of hybrid effect of hybrid fibre-reinforced composites

混杂纤维复合材料受拉构件的最优混杂比研究

Study on optimal hybrid ratio of hybrid fiber composite tension member

混杂纤维复合材料加固混凝土的优越性

Advantages of Hybrid Fiber Reinforced Polymer used for Strengthening Concrete

混杂纤维复合材料热膨胀性能及混杂效应的研究

Study on the thermal expansion performance and hybrid effect of Hybrid Composites

混杂纤维复合材料的应用及对混凝土加固的启示

Application of hybrid fiber reinforced polymer and suggestion drawn for concrete reinforcement

零膨胀单向混杂纤维复合材料的研究

Study on zero thermal expansion of uni-and multi-directional Hybrid Composites

混杂纤维复合材料的剪切特性（一）&夹芯结构

The shear characteristics of hybrid composites ( 1 ) & sandwich structure

单向混杂纤维复合材料常规及疲劳性能研究

Study on conventional and fatigue property of the unidirectional hybrid fiber composite

混杂纤维复合材料轴向剪切模量的预测

Prediction of Axial Longitudinal Shear Modulus of Multiphase Fiber Composites

混杂纤维复合材料双频副反射器的研制

Development of the hybrid fiber composite s dual-frequency subreflector

混杂纤维复合材料的平面剪切性能

Study on In-plane Shear Property of Hybrid Fiber Composites

一种用混杂纤维复合材料防止混凝土梁保护层剥离破坏的方法

A way against peeling-off of cover of strengthened concrete beam with hybrid FRP

混杂纤维复合材料头盔的设计与制备

Design and Fabrication of Hybrid Fiber Composite of Helmet

透波性混杂纤维复合材料性能与应用

Electromagetic properties and application of the hybrid composite

承载/声隐身混杂纤维复合材料的研究

Studies on structure / acoustic stealth Hybrid Composites

基体韧性和铺层方式对角层混杂纤维复合材料拉伸性能的影响

Effect of Matrix Toughness and Stack Sequences on Tensile Property of Angle-ply Hybrid Fiber Composites

本文研究了混杂纤维复合材料参数设计与材料力学性能的关系。

The relationship between parameter design and mechanical properties of hybrid fiber composite materials is investigated .

混杂纤维复合材料作为一种新型复合材料极大地扩展了复合材料的性能和使用范围。

As a new type of composites , hybrid fiber-reinforced composites expand its property and application fields .

混杂纤维复合材料的界面

Interface of hybrid composite

讨论了混杂纤维复合材料体积含量和质量含量的定义和作用；

The definition and function of the volume fraction and mass fraction for the hybrid fiber composite material was approached .

针对双频副反射器的结构特点和技术要求，研究了混杂纤维复合材料的性能和成型工艺。

According to structural features and technical requirements of the dual-frequency subreflector , the performance and shaping process technology of hybrid fibre composite are studied .

结果表明，玻璃、碳及其混杂纤维复合材料的平面剪切应力-应变曲线均具有非线性特征；在脆性基体中选用混杂结构，其复合材料的剪切性能具有正的混杂效应。

The results shows that the stress-strain curves of the composites were nonlinear and the hybrid fiber composites had a positive hybrid effect when the brittle matrix was used .

用石棉纤维替代部分炭纤维制造混杂纤维复合材料，既可保持炭纤维的优异力学性能，又可使材料具有价格优势，扩大了炭纤维的应用领域。

Hybrid composites made by replacing carbon fiber with some asbestos fibers maintains both excellent mechanical properties and lower the material price and expands the application field of carbon fibers .

研究结果为混杂纤维复合材料在实际工程加固中的运用提供了理论依据，并可为进一步进行相关研究提供参考。

The study results may provide a theory guideline for the utility of hybrid fiber composite material to the real engineering strengthening and a reference for the fore more relative work .

由于单一纤维复合材料是混杂纤维复合材料的特例，文中给出的计算公式同样适用于单一纤维复合材料。

Because the single fiber composite material is the special case of the hybrid fiber composite material , the calculation formulae in this paper can also apply to the single fiber composite material .

本文研究了基体韧性和铺层方式对±45°铺层的玻璃纤维、碳纤维及其混杂纤维复合材料拉伸断裂性能和损伤行为的影响。

In the paper , we investigated the effect of matrix toughness and stack sequence on tensile and damage properties of ± 450 angle-ply composites reinforced with glass fiber , carbon fiber and hybrid fiber .

利用有限元分析计算和冲击疲劳试验，确定了混杂纤维复合材料自行车车架的混杂比、混杂方式，并进行了优化设计。

By utilizing the finite element analytical calculation and impacting fatigue test , hybrid ratio and mode of hybrid of bicycle frame in hybrid fiber compound materials were determined , and the optimal design was carried out .

试验结果表明，利用挤压铸造工艺，可以制得组织致密、纤维分布均匀的Al2O3f+Cf/ZL109混杂纤维复合材料。

It is indicated by the experimental results that the Al_2O_ ( 3f ) + C_f / ZL109 hybrid fiber composite material with high density textures and uniform distribution fibers can be obtained by extrusion casting technology .