浸渍处理

通过对燕麦乌冬面进行添加剂、酸浸渍处理，以烹煮品质和感官评分为指标，采用单因素和正交试验，对燕麦乌冬面的加工工艺进行探究。

Through additive and acid dipping treatment , index with the cuisine quality and sensory assessment , study the oat udon noodles process by the single factor and orthogonal test .

熏蒸处理对抑制还原糖含量降低和呼吸强度升高比浸渍处理的效果显著，而对其它生理的影响效应低于浸渍处理。

The inhibiting effect of fumigating treatment on reducing saccharide and respiratory intensity was more significant than dipping treatment and other physiological effects of Dong jujube on two treatments were in reverse .

Si3N4浸渍处理提高硬度的研究

Dipping of Si_3N_4 Ceramic for Improving the Hardness

此条件下所得SAC的收率为28.3%，乙醇吸附量比未浸渍处理时提高近1倍。

The yield of SAC at the optimum conditions is 28.3 % , and the adsorption of alcohol is about two times that of the SAC without KOH impregnation .

对木材进行深加工处理，一直采用CCA和ACQ防腐剂对木材进行真空加压浸渍处理，都达到理想的效果。

Of timber processing , has been using CCA and ACQ wood preservatives on the vacuum pressure impregnation treatment , have achieved the desired result .

有一项发明采用含铜离子的碱性溶液浸渍处理，将沉积了胶体钯颗粒的表面转变为导电层，这项发明已获得了市场应用而且对于铸模ABS塑料镀覆金属效果不错。

An invention which converts surface-deposited colloidal palladium particles to a conductive layer using an alkaline copper ion containing post-dip is meanwhile in the market and works not too bad for the metal plating on moulded ABS plastic parts .

本文用SAS软件进行数理统计分析，对沙生灌木刨花板和中纤板局部树脂浸渍处理试验结果进行研究，确定出现有试验条件下刨花板最佳浸渍工艺为浸渍压力0.7MPa；

We use the Mathematical Statistic Method to analysis the data . Finding out the best impregnating technology of PB is : pressure is 0.7MPa ;

聚四氟乙烯纤维织物是PTFE与Nomex、玻璃纤维（或芳纶纤维）等材料，采用特定方法纺织，并经特殊浸渍处理后制成的复合织物，具有强度高，摩擦系数小的特点。

The polytetrafluoroethylene fabric is a kind of compound fabrics woven out of PTFE , Nomex , fiberglass ( or Kevlar fibre ) by special weaving process and impregnating treatment with the high quality of high strength and low fnction coefficient .

进行浸渍处理与ACQ或UF单独处理材经煮沸和抗水、酸、碱抽提的抗流失性对比试验及防腐试验，表明前者比后者有所提高；

The soaking material and the ACQ soaking material were respectively carried on boil the anti_draining contrast experiment and the anti_water , the acid , the alkali extracts , indicated which its processing material had the enhancement compare with alone the soaking ACQ processing material .

改性BFR浸渍处理胶合板，与BLFR相比，提高了胶合板的增重率，对提高胶合板的阻燃性能起了积极作用；优选添加量为0.1%的渗透剂和5%的硼砂。

BFR had a positive effect on the proprieties of plywood . The weight percent gain of plywood increased and the property of flame retardant improved . The optimum additive amount was 0.1 % penetrant and 5 % borax .

采用浸渍处理（浓度为0.1%、0.3%、0.5%）和熏蒸处理（浓度为0.5mL、1mL、2mL）两种方法，研究了丁香精油对冬枣采后保鲜效果的生理效应。

Dipping ( concentration : 0.1 % 、 0.3 % 、 0.5 % ) and fumigating treatments ( concentration : 0.5 mL 、 1 mL 、 2mL ) have been applied to study its physiological effects of Clove oil on Dong jujube .

对利用ACQ木材防腐剂处理杉木小径材的研究结果表明，使用浓度为0.5%的ACQ对杉木小径材进行真空加压浸渍处理，可以达到较好的防腐处理效果。

The paper studies the preservative treatment of small-sized China fir with ACQ . The results show that it will get a good effect to use 0.5 percent concentration of ACQ to treat small-sized China fir by soaking under the vacuum and pressure conditions .

微波超声波技术在阻燃剂浸渍处理木材中的应用

Introducing Microwave and Ultrasonic Technology to Soaking Wood with Fire Retardants

浸渍处理能在一定程度上改善木材的表面润湿性能。

Resin impregnation can improve the surface wettability to some extent .

浸渍处理提高出丝率理论与实践

Theory and practice of raising silk yielding by steeping treatment

新型透明耐水砂纸浸渍处理剂的研究

Research on Treating Agent of Lucency Water-proof Abrasive Paper

浸渍处理层与芳纶纤维粘合问题的研究

Study on Adhesion Problem between Adhesive and Aramid Fiber

木材构造对木材化学阻燃浸渍处理方法的影响

Relationship between Wood Construction and Wood Chemistry Soaking Technology Treated with Fire Retardants

阻燃剂浸渍处理木材方法研究

Research Soaking Methods of Wood Treated with Fire Retardants

浸渍处理人工林杉木干燥特性的研究

Study on the Drying Characteristic of Resin-impregnated Chinese Fir

陶瓷化单板是以木材单板为基材，陶瓷前驱液为浸注剂，采用溶胶-凝胶法经真空加压浸渍处理而成。

Ceramic-veneer is a material prepared by Sol-Gel method and Vacuum-Pressure method , and constitutes with veneer and ceramic emulsion .

结果表明，不同香辛料浸渍处理的牛肉加工后检测到的杂环胺种类、含量也不同。

Results showed that the different HAAs types and contents were detected in beef samples after dipping processed with different spices .

对表层单板进行BL&环保阻燃剂浸渍处理，并对由此制成的胶合板的阻燃性能和环保性能两个指标进行考察。

Performance of plywood made from fire retardant treated surface veneers was investigated with focus on its fireproof property and formaldehyde emission .

试验结果表明，壳聚糖浸渍处理棉织物后再染色，浮色少、色泽稳定、摩擦牢度较高。

As a result , the dyed fabric pretreated with chitosan featured less loose color , stable color and higher color fastness to rubbing .

以杨木单板和竹帘为原料，采用低分子量水溶性酚醛树脂浸渍处理，通过干燥、组坯、热压等工艺制备竹木复合强化单板层积材。

Strengthened Bamboo / Wood composite laminated veneer lumber was manufactured from poplar veneer and bamboo curtains which were impregnated with low-molecular-weight water-soluble phenol-formaldehyde resin .

对酚醛浸渍处理杉木与杉木素材的干缩性、湿胀性、吸水性能进行了对比研究。

The paper based on a comparison research between resin impregnation treated Chinese fir and untreated Chinese fir , concerning the characters of shrinkage , swelling and water absorption .

制得高强度耐火粘土砖的试验结果表明：浸渍处理后的试样，常温耐压强度均获得了不同程度的提高，体积密度增加，气孔率下降。

The result shows that the compressive strength at normal temperature of impregnated samples is raised in varying degree , their bulk density is increased and the porosity is decreased .

研究是以速生杨木为主要原材料，用水溶性低分子量脲醛树脂、水溶性低分子量酚醛树脂浸渍处理，来制备强化杨木单板层积材。

This research use Poplar veneer as the main raw materials , use low molecular weight water-soluble PF and UF resin as dipping liquid , to manufacture intensified Poplar LVL .

考察了阻燃剂磷酸脒基脲浓度、浸渍处理时间对阻燃效果的影响，并研究了绝缘纸经阻燃处理后热降解参数、剩炭率、击穿电压的变化情况。

Probed the effect of the content of guanylurea phosphate and the soaking time on flame retardation , at the same time the treated insulated paper was studied by thermal analysis .

鲜切梨加工的最佳工艺参数利用0.2%的柠檬酸和0.2%抗坏血酸浸渍处理鲜切梨，去除表面水分后经臭氧杀菌30~45min；

The fresh Minimally pear processing parameter is 0.2 % citric acid , 0.2 % antiscorbutic acid dipping treated fresh cut the pear , sterilized 30 ~ 45 min after the ozone ;