气泡形成

毛细管端气泡形成规律及其影响因素

Regularity and factors of bubble formation on capillary

微孔介质上气泡形成规律的研究

Study on the bubble formation on microporous membrane

RTM工艺过程中气泡形成机理及排除方法研究进展

Study Development of Mechanism for Void Formation and Elimination During RTM Processing

RTM工艺中气泡形成及消除研究

Research of Void Formation and Elimination in RTM Processing

红细胞压积（Hct）升高。（2）快速减压可造成兔肺泡壁充血、肺泡腔内渗出，肺毛细血管内气泡形成。

Alveolar wall congestion , alveolar infiltration and gas bubbles in pulmonary capillary were observed in lung .

根据实验结果进一步讨论了GMT片材熔融浸渍过程中的气泡形成以及浸渍工艺参数的选择。

Furthermore , selection of impregnation parameters in GMT melt impregnation was discussed according to the experimental results .

吸氧排氮对家兔氮排出量及减压气泡形成的影响

Nitrogen output and bubbles formation during decompression after denitrogenation in rabbits

静态条件下闭孔泡沫铝气泡形成过程模拟研究

Simulation of A Static Bubble Formation Process of Closed Cell Aluminum Foam

铝电解中阳极气泡形成的电化学研究

Electrochemical study on evolution of anodic bubble in aluminium electrolysis

三峡工程混凝土表面气泡形成原因分析

Analysis on Surface Bubbles of Concrete for Three Gorges Project

我们观察第一个气泡形成的时候。

I just start to see the first bubbles forming .

长纤维增强液态反应性树脂复合材料旋转模塑成型工艺气泡形成机理试验分析

Study on the Mechanism of Void Formation in Roto-moulding of Long-fiber Reinforced Resin

这里是地方的巨型气泡形成的模具。

Here is the spot where the giant air bubble formed in the mold .

气体辅助注射成型制品气泡形成的实验研究

Experimental Study on Foam Formation on Gas Channel Wall in Gas-Assisted Injection Molded Parts

增大表观传质系数的关键在于尽可能减小气泡形成时的尺寸。

The key of increasing apparent mass transfer coefficient is decreasing bubble size during bubble formation .

活塞阳极氧化表面气泡形成的机理及影响

Mechanism for Air-Bubble Formation on Anodized Aluminum Alloy Piston and the Effect of Air-Bubble on Piston Performance

槽底表面粗糙度、锡液深度及温度对气泡形成有很大影响。

The surface roughness of bath bottom , depth of tin liquid and temperature all affect the bubble forming considerably .

使用不同模型的计算结果表明，单一孔上气泡形成模型难以描述微孔介质上气泡形成规律。

The model developed for the bubble formation at single nozzle can not be used to describe the bubble formation on microporous membrane .

揭示了生产中浮法玻璃气泡形成的机理、位置、尺寸、组成与操作工艺条件之间的规律。

This paper reveals the relationship between the operations of float glass and the size , location , composition and mechanism of bubble generation .

流态化系统也常出现自组织流动现象，如数个颗粒聚集在一起形成颗粒团运动，几个气泡形成气泡群作螺旋式上升运动等。

Self-organization phenomena are also usually found in fluidization system , for example , movement of fluidized solid particle groups , spiral type ascending motion of bubbles and wakes .

而动态模型则是在静态模型的基础上考虑影响铝泡沫形成过程的动态因素对气泡形成的影响。

Moreover , the dynamic model is founded by simply applying the effects of dynamic factors on static model and includes all the geometric , physical and hydro mechanical factors of processing the aluminum foam .

微波通过反应电极在电极尖端形成强电磁场，电极尖端的气泡形成瞬间的高温高压环境使得气体更容易被击穿，从而产生低温等离子体，利用等离子体的反应性进行模拟水处理。

Microwave forms strong electromagnetic fields on cutting-edge through the reaction electrode , where the gas environment makes more vulnerable to a breakdown for the existing of bubbles which provide a condition with high temperature and high pressure .

一些科学家们推断，鱼类在利用声音和气泡形成有视听效果的屏障，来迷惑捕食者。但是要确定啾啾声和气泡是否具有行为功能还需要进一步的研究。

Some scientists speculate that the sound and bubbles might work as a visual and acoustic screen to confuse predators , but more studies are needed to determine if the chirping bubbles have a behavioral function or not .

通过采用粉体致密化浸入式快速加热新工艺制备泡沫铝技术，研究了泡沫铝发泡早期气泡形成特征、早期气泡孔径结构特点及动态变化规律。

Formation characteristics , aperture configuration and dynamic change of gas hole in the early stages of foamed aluminum were investigated based on preparation of foamed aluminum by a new powder metallurgy method with immersing preformer and heating up rapidly .

VDMOS器件贴片工艺中气泡的形成机制与影响

Formation and Effects of Void in VDMOS Die Attach Process

搅混流（churnflow）是气液两相通过竖直或倾斜管时，弹状流中的大气泡破裂形成的一个不稳定流态，是弹状流与环状流之间的重要过渡流型。

Churn flow is an instable flow pattern appeared when the bubbles explode in slug flow . As an important flow pattern happens in the transition between slug flow and annular flow , churn flow mainly appeared in vertical and inclined tubes .

根据国内外的研究成果对RTM工艺过程中气泡的形成机理及其研究方法、排除方法等进行了全面的分析总结，并且对RTM气泡研究的未来方向进行了展望。

Based on the domestic and foreign study achievements , the paper roundly analyzes and summarizes the mechanism of voids formation , ways of study and eliminating methods in RTM , and looks into the future of RTM void research .

闭孔泡沫铝材料制备过程中气泡的形成与演化

Formation and evolution of bubble in fabricating closed - cell aluminum foam

固体被上升气泡夹带形成气泡尾涡。

Solid is entrained by rising bubbles to form the bubble wave .

恒流率条件下非润湿喷孔上气泡的形成

Bubble formation from non-wetted orifices under constant flow rate