步进电动机
- 网络step motor;Stepping Motor;stepper motor
![步进电动机](../cache/1399990.jpg)
-
拟牛顿法在步进电动机CAD中的应用
The Application of Quasi & Newton Method in CAD of Step Motor
-
基于PLC的步进电动机升降速控制
Control of Step Motor Acceleration-deceleration Based on PLC
-
混合式步进电动机CAD系统研究
The Research of a Hybrid Stepping Motor CAD System
-
基于DSP混合式步进电动机微步驱动系统研究
Research on Micro-stepping Control System of Hybrid Stepping Motor based on DSP
-
步进电动机的PLC控制设计与计算机仿真
Controlling Design of the PLC of the Stepper Motors and Its Computer Simulation
-
适用于PLC的新型步进电动机控制驱动器
New Control Driver for Step Motor Suitable for PLC
-
面向对象的混合式步进电动机CAD系统
Visual CAD System of Hybrid Stepping Motor
-
将步进电动机应用于离子静电加速器PLC控制系统。
Stepper motor is used in the PLC control system of ion electrostatic accelerator .
-
PLC用于步进电动机控制
PLC Used in the Step - motor Control
-
基于PLC的步进电动机软起、停控制设计
The Design of Soft Start and Stop Control for Stepper Motor Based on PLC
-
基于FPGA的步进电动机平滑运行设计
Design on the smoothly running control system of step motor based on FPGA
-
基于FPGA的仪用两相步进电动机细分驱动器的设计
Design of Two-phase Micro-stepping Motor Driver Based on FPGA
-
基于PLC的步进电动机单双轴运动控制的实现
Achievement to the motion control on of the single-two axis stepper motor based on PLC
-
五相混合式步进电动机PWM调频调压驱动
Frequency / Voltage Modulated Drive of Five-Phase Hybrid Stepping Motor
-
采用双CPU的混合式步进电动机速度控制系统
Speed control system of hybrid stepping motor with dual CPU
-
场路结合的电机CAD研究一种基于场路结合计算模型的步进电动机优化设计方法
Optimum Design Method on the Basis of the Calculation Model Combining Field with Circuit of Stepping Motor
-
介绍了一种基于Windows操作系统适用于混合式步进电动机的CAD系统。
In this thesis , a hybrid stepping motor CAD software for Windows operating system is introduced .
-
双CPU单片微机下的步进电动机的智能控制
Step-motor Intelligence Control System Based on Double CPU Microprocessor
-
基于FPGA和DDS技术的步进电动机速度控制器
Speed Controller for Step Motor Based on FPGA and DDS
-
基于CPLD的步进电动机控制
On a control circuit of stepping motor based on CPLD
-
CPLD器件在两相混合式步进电动机驱动器中的应用
Application of CPLD in Two-phase Hybrid Stepping Motor Systems
-
基于DDS技术实现步进电动机精确定位
A Stepper Motor Precision Position Controlling Based on DDS Technology
-
重点介绍了使用Visualc++实现脉冲发生器驱动步进电动机的几种方法,并分析其优缺点。
It introduces emphatically several methods of carring out pulse generator using visual c + + and analyses the advantage and disadvantage of these methods .
-
并将此开关稳压电源应用于三相步进电动机H桥功率驱动电路中,实测了电源电路的波形并进行了分析。
And appling it to the Hbridge power driving circuit of3phase stepping motors , measuring and analyzing the circuit curves of the power supply .
-
基于ARM嵌入式控制器,提出了供纸系统中直流电动机和步进电动机驱动电路设计方案。
Based on the embedded system of ARM , The design scheme of DC motor and stepper motors driving circuits is proposed .
-
结果表明,基于PWM技术的三相步进电动机驱动器线路简单且性能良好。
So driver of three phase stepping motor based on PWM technology is provided with simple circuit and good property .
-
步进电动机控制在柴油机EGR控制系统的应用
Application of stepping motor control in EGR control system for diesel engine
-
该试验台数控系统采用IPC作为其控制主机,混合式步进电动机驱动,具有在线测量组合开关触点压降的功能。
The system adopts IPC as its main control computer and is driven by hybrid stepping motor .
-
HB型步进电动机一体式分割型阻尼减振方式的提案
A Proposal for the Way of Decreasing Vibration with One - Body Split - Type Damping for Hybrid Stepping Motors
-
建立了步进电动机的数学模型并进行了Matlab仿真,证实了步进电机开环控制具有较好的控制精度。
The mathematical model of the step motor was constituted and through the Matlab simulation it was proved that the open-loop control method of the step motor had good accuracy .