模具制造技术

近年来，快速模具制造技术（RapidTooling-RT）得到了飞速发展。

Recently Rapid Tooling ( RT ) gains flying development .

薄板叠层粘接模具制造技术中的CAD研究

Study on CAD Approach in Die 's Manufacturing by Sheet Metal Layer for Layer through Gluing

基于RE和RP技术的锌合金及环氧树脂快速模具制造技术

The Technology of Making Rapid Tooling by Using Zinc Alloy and Epoxy Based on RE & RP

主要介绍RPM的基本原理和基于RPM的快速模具制造技术的研究进展以及基于RPM的模具快速制造方法。

RPM principle , manufacturing methods and research situation of rapid tooling based on RPM are introduced .

介绍了基于RP的快速金属模具制造技术，分析了影响模具制造精度的因素。

The paper introduces the technology of rapid metallic tooling manufacture , analyses the factors influencing the precision of tooling manufacture .

大型薄壁Invar钢复合材料模具制造技术翻模法施工桥梁薄壁墩的竖直度控制

Manufacturing Process of Large-sized and Thin-walled Invar Mold Verticality control of the bridge thin-wall pier by using turnover formwork

模具制造技术的迅速发展，已成为现代制造技术的重要组成部分，如模具的CAD／CAM技术，已在开发的模具DNM技术。

The mould manufacturing technology developed promptly and has become an important component of modern manufacturing technology , such as the CAD / CAM technology , and the DNM technology etc.

最后指出RP的应用将大大促进模具制造技术的进步，对提高产品质量、加速新产品的开发以及降低工装模具的费用等方面都有积极的意义。

At last , this paper put forward the application of rapid prototyping will accelerate the rapid tooling advances and play a great role more and more in accelerating the new product exploiting and lowering the frock tooling cost .

基于曲面重构的塑料异型材挤出模具制造技术

Manufacturing Technology of Plastic Profile Extrusion Die Based on Surface Reconstruction

人工神经网络在模具制造技术中的应用

The Application of ANN on Die & Mould Manufacturing Techniques

基于反求工程和快速原型的模具制造技术

Rapid Tooling Manufacturing Based on Reverse Engineering and Rapid Prototyping

基于快速原型的石膏型快速模具制造技术研究

Study on the Rapid Tooling Technology Combining Rapid Prototyping and Plaster Casting

基于RP&RT集成环境的快速模具制造技术

Rapid tooling manufacturing based on RP & RT integrated environment

基于快速原型的热喷涂直接金属模具制造技术

Rapid Direct Metal Die Manufacturing from Thermal Spraying Based on Rapid Prototyping

随着模具制造技术由技能化逐步向科学化发展的趋势，计算机技术被越来越多地引入模具制造过程中。

Computers are more and more used in the mould and die manufacturing .

拉挤模具制造技术问题的探讨

Investigation of Technical Manufacturing Problems of Pultrusion Die Manufacturing

快速模具制造技术的应用研究

Application Study of the Technology of Rapid Mould Making

任务驱动型教学模式在《模具制造技术》课程中的应用

" Task-driven " teaching mode application in the course " Die Manufacturing Technology "

地铁车辆铝型材用特种挤压模具制造技术分析

Analysis of Producing Technology for Special Extrusion Die of Aluminum Profiles for Subway Vehicles

一种新颖的模具制造技术&多点冲模

A new die making technology & multipoint-punching die

快速成型与快速模具制造技术

Rapid Prototyping and Rapid Tooling Manufacturing Technology

基于微电铸的微通道热压成形模具制造技术的研究

Research on Manufacturing Technology of Micro Molds for Hot Embossing of Micro Channels in Micro Electroforming

先进的模具制造技术

Advanced Mould and Die Making Technology

直接模具制造技术的发展动态

Development of Direct Tooling Manufacture

随着快速模具制造技术的完善，快速模具的质量将不断提高。

Along with the improvement of the Rapid Tooling Technology , the quality of Rapid Tooling will be promoted continually .

在反求工程和快速原型技术基础上，分析了基于反求工程和快速原型的快速零件/模具制造技术；

This paper analyzes the reverse engineering and rapid prototyping technologies . Rapid tooling / parts manufacturing technology is proposed .

熔融沉积制造精度及快速模具制造技术的研究

Numerical Simulation of Molding in Fused Deposition Modeling Study on Precision of FDM and Rapid Tooling Based on FDM & LOM

快速成型技术和快速模具制造技术为解决该问题提供了技术支撑。

The Rapid Prototyping ( RP ) and Rapid Tooling ( RT ) technologies are among the technical supports to solve these problems .

本文对基于快速成形技术的石膏型快速模具制造技术进行了深入研究。

The rapid manufacturing technology of plaster casting dies based on rapid prototyping ( RP ) is systematically and deeply studied in this paper .

基于石膏型快速模具制造技术产业化的实际需要，研制了石膏型真空造型设备。

Because of the actual requirement of RP based rapid mould making process by plaster casting technology industrialization , plaster vacuo-forming equipment has been fabricated .