材料试验机

介绍了利用材料试验机测试囊式空气弹簧隔振器静态、动态特性的原理及方法，并对某试样进行了测试和分析。

The testing theory and method of the static and dynamic stiffness characteristics of pneumatic vibration isolator by MTS was presented .

如何科学有效地达到对材料试验机的应力速率及应变速率控制，是目前试验机领域的关键问题。

How to control the stress rate and strain rate of material testing machines scientifically and effectively is a key problem in the testing machine field .

基于ARM的万能材料试验机控制器

Universal Material Testing Machine Controller Based on ARM

与医用CT配套的便携式材料试验机的研制及其在混凝土损伤研究中的应用

Manufacture of Portable Material Test Device Forming a Complete Set with Medical X-Ray CT and its Application in Concrete Damage Study

本文采用理论和试验相结合的方法系统地开发了一套基于PC计算机的材料试验机测试、控制和数据处理系统。

In this paper , a system about material test machine for testing , controlling and data processing is exploited based on PC.

基于USB总线电子万能材料试验机测控系统驱动程序的开发

Development of the Driver Programme for Testing and Control System on the basis of USB Bus Electronical Universal Material Test Machine

MTS材料试验机的通道扩充技术及其应用

Study on MTS channel extending technique and its application

应用MTS材料试验机对高能材料进行快速加载的试验研究

An Experiment Study on Mechanical Properties of Energetic Materials Under Impact Loading Using MTS

基于AVR单片机的万能材料试验机控制系统

Automatic control system for multifunctional material testing machine based on AVR single chip microcomputer

MTS材料试验机的升级改造

Upgrade of the MTS Material Test Machine

MTS万能材料试验机在石油管材止裂韧性测试中的应用

Application of MTS universal material tester for testing of crack arrest toughness of oil and gas pipes

通过万能材料试验机测试硫化胶的物理机械性能，以及利用扫描电镜（SEM）观察了炭黑颗粒在橡胶基体中分散情况，提出了亲水性炭黑对天然胶乳的补强机理。

The mechanical properties of vulcanizates were tested through the universal material test machine and the carbon black particles dispersed in rubber matrix by scanning electron microscopy ( SEM ) .

针对现有材料试验机上普遍采用的传统应变测量方法存在的不足，设计了利用CCD摄像机单目视觉非接触测量材料应变量的方法。

The method of measuring metallic strain using CCD camera based on monocular vision , which solved the problems existing in traditional measurement methods , was presented in this paper .

在INSTRON材料试验机分别做张力、扭力及弯曲负荷测试。

Finally , tension , torsion , and bending tests are performed with INSTRON .

应用Instron材料试验机，考察了拉伸过程中玻璃微珠填充LDPE复合体系的力学性能。

The tensile Properties of glass bead filled LDPE composites were studied by means of an INSTRON Materials Tester .

本项研究根据岛津液压伺服材料试验机和CT试样的特点，首次提出了基于通过测量反映加载点位移的试验机活塞位移的卸载柔度法来测量裂纹长度。

According to the characters of SHIMADZU electro hydraulic servo controlled fatigue testing machine and CT specimen , put forward a method based on compliance of stroke displacement which reflects the displacement of loading point at first time .

利用生物材料试验机（MTS）测量依序切断肘关节尺侧副韧带时其外翻旋转角度的变化。

To measure the valgus rotatory instability of the elbow in serial sectioning the ulnar collateral ligament complex with material test system ( MIS ) .

对现有的电子万能试验机控制系统进行了比较分析，基于USB总线的虚拟仪器技术，给出电子万能材料试验机测控系统的设计方案结果。

Current control system of universal material test machine is analysed in the paper . It is a new attempt to virtual instrument based on USB bus introduced into design of electronic universal material test machine .

该系统配合材料试验机，在专用软件控制下，可以快速实时地测定材料的弹性模量E、比例极限σp、屈服极限σ（0.2）。

Under the control of special software , this system can be used with a testing machine to measure elastic modulus E , proportional limit σ _p , a yield limit σ _ ( 0.2 ) of matrals in a fast and timely way .

MTS-810振动三轴材料试验机的升级改造

Upgrade and Improvement of the Triaxial Material Test Machine of MTS-810

MTS810材料试验机计数电路分析及应用

Analyzer and Application of the Counter Circuit of MTS 810

应用Instron材料试验机，考察了室温下微珠大小及含量对填充LDPE复合物拉伸屈服行为的影响。

The effects of the filler size and content on the tensile yield behaviour of LDPE componnd filled with glass beads were investigated by INSTRON materials tester at room temperature .

介绍了电子万能材料试验机计算机改造项目中的数据采集技术，介绍了如何在Windows环境下驱动数据接口卡，以及利用多线程技术在Windows环境下实现高速、可靠的AD数据采集。

A data collection technology used in the control system of electronic multi function tester , and how to make the data collection card work under the Windows platform are introduced . A multi thread technology to achieve reliable and high speed data collection is also introduced .

建立起以MTS810.15万能材料试验机为主体的材料止裂韧性试验装置，对石油天然气输送管材进行了平面应变止裂韧性（K（la））测试。

On the basis of MTS 810 . 15 universal tester , a set of test installation for plain-strain crack-arrest fracture toughness ( K_ ( ia )) testing was established . The test of K_ ( ia ) of natural gas transporting pipes was carried out .

为了研究断裂韧度的尺寸相关性，采用中心裂纹圆盘试件，在岛津材料试验机上对有机玻璃（PMMA）纯Ⅰ型、纯Ⅱ型准静态加载条件下的断裂行为进行了实验研究。

In order to study the size dependence of the fracture toughness , pure mode I and pure model ⅱ fracture tests for polymethyl methacrylate ( PMMA ) were performed under quasi-static loading by using central cracked circular disk specimen .

在分离式霍普金森压杆（SHPB）和MTS810材料试验机上分别对泡沫纯铝材料和铝硅合金泡沫材料进行了动态与准静态压缩实验研究。

A variety of experiments on aluminum foam and aluminum-silicon foam are carried out under dynamic loading on SHPB and quasi-static loading on MTS 801 respectively .

通过对采用动态力学分析（DMA）法得到的动态储能模量主曲线和材料试验机得到的静态松弛主曲线进行对比，验证了这种关系。

The dynamic storage modulus master curve obtained by means of the dynamic mechanical analysis ( DMA ) methods was compared with the static relaxation modulus master curve obtained from material test machine , finally the relationship was confirmed .

在MTS伺服控制材料试验机上测得了陨石的全程应力&应变曲线。对焊接空心球节点整体模型进行应力计算分析；

The whole stress-strain curve of the meteorite is drawn on a MTS servo-controlled testing machine , and the compressive strength , elastic modulus and Poison 's ratio are determined as well by way of uniaxial compression .

制备好的试件在37℃蒸馏水中放置24h后，在SHIMADZU材料试验机上测试剪切粘结强度，加载速度为05mm/min。

After specimens stored in distilled water at 37 ℃ for 24 hours , the shear bond testing was carried out using a SHIMADZU universal testing machine with a cross-head speed of 0.5 mm / minute .

应用JBK测试系统替代Instron6027材料试验机的测试系统，使试验机恢复正常。

The old measuring system of the Instron 6027 materials testing machine was replaced using JBK measuring system .