万能试验机

NET试验软件，配以高精度进口滚珠丝杠结构，不仅其测量精度高、操作简便，而且控制稳定，是新一代高精度的电子万能试验机。

NET software , and high precision importing ball bearing silk . Not Only It has high precision measure and simple used Characters , but also has control stabilization . It is new generation Electric Universal Testing Machine .

模糊自适应PID控制器及其在电子万能试验机中的应用

Fuzzy adaptive PID controller and its application to electronic universal testing machine

C组给予后柱骨盆重建单钢板固定。在CSS-44020型电子万能试验机上进行该试验。

In group C , the fixation was with curved reconstruction plates at posterior column .

模糊PID控制器在液压万能试验机上的应用

The Application of Fuzzy-PID Controller on Hydraulic Universal Testing Machine

利用CAT技术改进液压式万能试验机测试方法的探讨

Approach on improving the testing method of universal hydraulic testing machine with CAT technology

基于FPGA的万能试验机控制器的研制

FPGA-based control system for testing machines

微型机系统在日本DSS系列电子万能试验机上的开发应用

A micro-computer applied to the Japenese DSS universal testing machine series

CPLD在万能试验机控制器中的应用

The Application of CPLD to Universal Testing Machine

利用XRD、SEM以及万能试验机表征样品的物相组成、微观结构和力学性能。

Moreover , the composition , microstructure and mechanical properties of the samples were characterized by SEM , XRD and universal testing machine , respectively .

文章对现场可编程门阵列（FPGA）在万能试验机控制器中的应用方面作了一些探索，主要包括A/D、D/A、串口通信、光电编码器等信号的处理。

This paper introduces the application of field programmable gate array ( FPGA ) to universal testing machines , including A / D signal input , D / A output , and communication with computer .

方法在ShimadzuAUTOGRAPH电子万能试验机上对L5椎体松质骨试样进行压缩应力松弛、蠕变实验。

Methods Make the stress relaxation test and the creep test on them with Shimadzu AUTOGRAPH electronic universal testing machine .

通过X射线衍射、四探针测试仪及电子万能试验机等表征了C/C复合材料的石墨化度、电阻率以及抗压强度。

The graphitization extent of C / C composite was investigated by X-ray diffraction , the resistivity and compressive strength of C / C composites were monitored by the Four-Point Probes and Electronic Universal Testing Machine , respectively .

对现有的电子万能试验机控制系统进行了比较分析，基于USB总线的虚拟仪器技术，给出电子万能材料试验机测控系统的设计方案结果。

Current control system of universal material test machine is analysed in the paper . It is a new attempt to virtual instrument based on USB bus introduced into design of electronic universal material test machine .

针对万能试验机系统存在的非线性和不确定性因素，采用基于神经元的PID控制方法实现万能试验机高精度动态控制。

In connection with the nonlinear and uncertainty factors which is existing universal testing machine system , in order to achieve the requirement of high precision dynamic control of universal testing machine , the neuron PID control algorithm is presented .

G/C复合材料的结构变化通过XRD进行表征，并利用万能试验机和四探针测试仪对高温热处理后G/C复合材料的力学与电学性能进行了研究。

The structure change of G / C composites was characterized by XRD , and the mechanical and electrical properties of G / C composites were evaluated by Electronic Universal Testing Machine and the Four-Point Probes , respectively .

DCS-500型万能试验机的特殊测量方法

Some Special Measurements Made on DCS-500 Universal Testing Machine

对于采用万能试验机模拟的轻微压伤，通过Otsu阈值分割、膨胀操作并提取边界的图像处理方法，最后对水果边界进行角点检测。

The slight pressure injury simulated by Instron texture instrument could be detected through the Otsu threshold segmentation , expansion operation and boundary extraction and the corner detection of the fruit image .

研究了反应单体、交联单体及功能单体对胶膜的拉伸强度、吸水性和硬度的影响，用硬度计、万能试验机、TG等进行了表征。

Effect of reaction monomer , cross-linking monomer and functional monomer on the tensile strength , hardness and water absorption of adhesive film was studied and characterized by hardness tester , universal testing machine , DSC , TG and so on .

CSS-88000电子万能试验机的研制

The Research of CSS-88000 Electric Universal Testing Machine

低应变率（准静态试验）是在CSS-55000系列电子万能试验机上进行，高应变率试验是在分离式Hopkinson拉杆和分离式Hopkinson压杆装置上进行的。

Tests under lower strain rate are performed using mode CSS-55000 serials electronic controlling testing machine , and the split Hopkinson bar is used for higher strain-rate tests .

WAW-600C万能试验机的应用开发

Application of WAW-600C Hydraulic Universal Testing Machine

本文借助万能试验机、空气动力枪及颗粒高速动态分析系统分析了FR-4型线路板的力学性质；

In this paper , the mechanics properties of FR-4 PWBs were tested with the help of omnipotent tester , air gun impact device and high speed dynamic analysis system .

运用Instron万能试验机对常温贮藏的整番茄进行了应力松弛特性试验，分析了松弛特性4个参数、压缩特性的压缩弹性模量E、坚实度Fi以及糖酸比等指标的变化规律。

Stress-relaxation property of intact tomato during storing at normal temperature was studied using Instron machine . The variation trends of four relaxation characteristic indices were analyzed , as well as the variation of compress modulus , firmness and sugar-acid ratio , etc.

本试验应用Instron万能试验机对常温贮藏的整番茄进行了蠕变特性的试验，对蠕变特性四参数、压缩弹性模量E、坚实度Fi、糖度及pH值等指标的变化规律进行了分析。

Creep property of intact tomatoes stored at normal temperature was studied using Instron universal machine . The changes of four variables of creep property , as well as compress modulus E , firmness F_i , sugar content and pH value , etc , were analyzed .

利用MTS万能试验机研究了X70管线钢在不同应力加载速率和不同加载过程下的室温蠕变现象，以及室温蠕变对流变应力的影响。

The phenomenon of room temperature creep ( RTC ) deformation and its effect on subsequent flow stress under various loading stress rate ( Lsr ) and loading process in a X70 pipeline steel were studied .

选择WDW-5万能试验机作为小冲杆试验机的基础机身，并在此基础上进行设计。

The design for the small punch testing machine is carried out based on the WDW-5 universal testing machine which is selected as the base fuselage .

方法取正常国人8具新鲜尸体颈椎C1-C4、C4-T1不同节段前纵韧带在ShimadzuAUTOGRAPH电子万能试验机上进行单向拉伸实验研究。

Methods Anterior longitudinal ligament of C1-C4 ? C4-T1 segments was obtained from 8 fresh Chinese cadavers to test their tensile strength using Shimadzu AUTOGRAPH electronic universal testing machine .

利用电子万能试验机和分离式Hopkinson压杆研究了乙烯基酯树脂浇铸体在准静态和高应变率下的压缩特性，考察了试样压缩失稳和破坏的形貌。

Quasi-static and high strain rate compressive experiments on the vinyl ester resin casting were carried out by using a material universal testing machine and Hopkinson bar , and the behaviors of compressive instability and fracture of the resin casting at different strain rates were investigated .

根据GB4156-84《金属杯突试验方法》，研制在伺服万能试验机或微机控制压力试验机上应用的杯突试验夹具。

According to GB4156-84 《 The method of metal cupping test 》, develop the cupping grips that can be used in servo universal testing machine and computer control pressure testing machine .

静载试验在50吨YAW-5000微机控制万能试验机上完成，边界条件为两端固定，实验过程中记录了侧向力&跨中挠度关系曲线，观察了构件横截面破坏过程。

The bending static test was completed in 50 tons YAW-5000 microcomputer-controlled universal testing machine , with fixed-fixed boundary condition , The relationship curves of load and deflection of mid-span were recorded , the destruction process of cross section about component was observed .