材料的力学性能

采用的PPG分子量不同，得到的改性材料的力学性能相差悬殊。

The mechanical properties of materials obtained are distinctively different because of different molecular weight of PPG .

在其中加入SAN和ABS粉后，材料的力学性能提高的却并不显著，但材料也有了明显的脆韧转变。

The improvements of the mechanical properties of materials were not significantly when POE-g-MA was blended with PA6 / SAN / ABS blends , but the material showed an obvious brittle-ductile transition .

Al2O3/TiC纳米复合刀具材料的力学性能与增韧强化机理

Mechanical Properties Toughening and Strengthening Mechanisms of Al_2O_3 / TiC Nanocomposite

SiC和Ti（C，N）颗粒弥散陶瓷材料的力学性能与微观结构

Microstructure and Mechanical Properties of SiC and Ti ( C , N ) Particulate Dispersed Ceramic Material

超声复合法制备的SiCP/ZA27复合材料的力学性能

Mechanical Properties of SiC_P / ZA27 Composites Prepared by High Intensity Ultrasonic Treatment

成核回收PET复合材料的力学性能提高，加工性能改善，成型周期缩短。

The recycled PET composite had good mechanical properties , better processability and shorter processing cycle .

研究了硅钙镁晶须（SCM晶须）/高密度聚乙烯（HDPE）复合材料的力学性能。

The mechanical properties of SCM whisker / HDPE composite were investigated .

SiC晶须补强Al2O3及Al2O3＋ZrO2陶瓷基复合材料的力学性能

Mechanical properties of silicon carbide whisker reinforced al_2o_3 and al_2o_3 + zro_2 ceramic matrix composites

用Weibull模数表征炭纤维增强树脂基复合材料的力学性能

Characterization of the mechanic properties of CFRP with Weibull distribution theory

但APP/PER对ABS复合材料的力学性能产生了不利影响。

However , the kind of IFR brought bad effects on mechanical property of ABS composite .

力学测试表明，所得Mg（OH）2/聚氨酯弹性体纳米复合材料的力学性能较纯PU有较大提高。

The results of mechanical test shows the mechanical performance of polyurethane / Mg ( OH ) 2 nanocomposite is improved greatly .

XD法制备TiCp/LD7复合材料的力学性能

Mechanical properties of tic_p / ld7 composites prepared with XD method

低掺量PA6短纤维水泥基材料的力学性能及耐久性

Mechanical properties and durability of cement matrix material with low content of PA6 fiber

La2O3-Mo5Si3/MoSi2复合材料的力学性能和高温氧化行为

Mechanical properties and high temperature oxidation behavior of La_2O_3-Mo_5Si_3 / MoSi_2 composite

原位反应生成W2B5-C复合材料的力学性能和电加工性能

Mechanical Properties and Workability of W_2B_5-C Ceramics Fabricated by In-situ Reaction

MoSi2-X%（wt）La2O3复合材料的力学性能与烧结工艺的关系

The Relationship Between Sintering Technology and Mechanical Properties of MoSi_2-X % ( wt ) La_2O_3 Composites

然而，纯HA陶瓷材料的力学性能较差，如脆性大，限制了它在生物医学领域的应用。

However , the poor mechanical properties of pure HA ceramic , such as its brittleness , have limited its clinical applications .

316L材料的力学性能及临界裂纹张开位移测试

Mechanical properties and determination of critical crack open displacement for stainless steel 316L

本文提出了一种新的力学分析方法，并采用CAE技术分析了三维编织复合材料的力学性能。

A new method of mechanical analysis has been presented for predicting the properties of textile composites with complex microstructure .

聚丙烯/轻质CaCO3复合材料的力学性能研究

Study on the Mechanical Properties of Polypropene - CaCO _ 3 Composite

TiC颗粒增韧MoSi2基复合材料的力学性能

Mechanical Properties of TiC Particles Reinforced MoSi-2 Composites

ZrO2增韧Al2O3-TiC系陶瓷复合材料的力学性能及其耐磨性能

The Mechanical Properties and Resistance to Erosion Wear of ZrO_2 Transformation Toughened A1_2O_3-TiC Ceramics Composites

另外，EAA和EVA亦在不同程度上改善了复合材料的力学性能。

In addition , both EAA and EVA could improve the mechanical properties of composites at different levels .

研究了纳米CaCO3/EPO/PP复合材料的力学性能、熔体流变性能及纳米CaCO3粒子在PP基体中的分散状况。

The mechanical and rheological properties of nano-meter CaCO 3 / EPO / PP composites and the dispersion of nano-meter CaCO 3 in PP matrix were studied .

考察了浸渍工艺，并研究了所得CC复合材料的力学性能和断裂形貌。

The process of impregnation was studied , and properties and fracture morphology of the resultant C / C composites were also measured .

随后的T6处理进一步提升了复合材料的力学性能，特别是小变形抗力。

T6 treatment also increased the mechanical properties , especially the sub-yield properties .

结果表明，溶剂能够与酚醛树脂在石英纤维表面形成竞争性吸附，从而影响树脂在RTM模具内部不同位置的分布和复合材料的力学性能。

The results show that solvents compete with phenolic resin for the adsorbing sites on the silica fiber .

而长纤CF/PSF复合材料的力学性能比纯PSF大大提高，其层间剪切强度为树脂基体PSF抗拉强度的80%左右。

The interlaminar shear strength of long-CF / PSF composite is about 80 % of tensile strength of PSF .

SEM观察发现采用原位聚合改性后的氢氧化镁与EVA基体树脂的相容性明显优于未改性氢氧化镁。将其填充EVA，明显改善了材料的力学性能和加工性能，材料的断裂伸长率提高4倍以上。

The mechanical properties of EVA filled with surface modified magnesium hydroxide were greatly improved , with the elongation at break being increased by a factor of four .

当加入5%（wt%）POE时，HDPE/POE/石墨复合材料的力学性能和加工性能较好。

When the content of POE is 5 % , the mechanical property of HDPE / POE / graphite composites was good .