焊接工艺

焊接工艺参数对镁合金CO2激光焊焊缝表面成形的影响

Effects of welding parameters on CO_ 2 laser welding of magnesium alloys

CO2电弧焊接工艺实践

Practice of CO_2 Arc Welding Process

SiCw/6061Al铝基复合材料粉末夹层瞬间液相扩散焊接工艺

Pulverous interlayer transient liquid phase bonding craft of Al-based composite SiC_w / 606Al

依据CO2焊接工艺的特点，设计了一种电子电抗器控制的逆变弧焊电源。

Developed a new kind of electronic inductor controlled inverter arc welding power source .

面向Intranet的焊接工艺计算机辅助设计系统开发

Development of welding computing aided process planning system for Intranet

1（1/4）Cr&（1/2）Mo耐热钢焊接工艺试验

Welding Technique Tests of 1 ( 1 / 4 ) Cr-1 / 2Mo Heat-resistant Steel

低碳钢CO2激光-脉冲MAG电弧复合焊接工艺研究

CO_2 laser-pulsed MAG hybrid welding of mild steel

当CO2含量>30%后，复合焊接工艺稳定性变差，焊缝硬度急剧降低。

Moreover , when CO2 > 30 % , the process stability and microhardness of weld dramatically decrease .

SiC药皮重量系数在20%时，焊条焊接工艺性最好。

When the weight factor of SiC coating is 20 % , the electrode weldability is the best .

不锈钢自动TIG焊焊接工艺参数

Welding Process Parameters on Stainless . Steel Automatic TIG Welding

介绍了不锈钢镶套的TIG焊接工艺。

This paper introduces the TIG_welding technology of repairing stainless steel casement .

尾翼筒机器人TIG填丝焊接工艺

Welding Technology of Robotic TIG Filling-wire for Wing of Cylinder

亚微米级Al2O（3p）/6061Al铝基复合材料扩散焊接工艺

Diffusion welding process of submicron aluminium matrix composite Al_2O_ ( 3p ) / 6061 Al

Ti/Al的交流TIG焊接工艺

Alternating current TIG welding procedure of ti / al

用CO2气体保护焊方法采用适当焊接工艺及焊接材料，对压榨机辊轴轴颈进行了补焊修复实验研究。

The study and experiment on the repair of roller journal CO_2 shield welding with proper welding technics has been done by us .

分析了逆变式脉冲TIG焊机的焊接工艺性能。

It also analyzes the welding technology characteristics of inverter pulse TIG welding machine .

薄板小变形MAG焊焊接工艺研究

Research on MAG welding technology of welding little deformation on thin plate

NET技术和3层结构体系开发实现B/S模式焊接工艺文档制定与管理系统的解决方案；

Based on these , a resolution to develop and establish a design and management system for welding process documents with Browser / Server mode is proposed and realized by adopting ASP .

采用扫描电镜（SEM）分析了不同焊接工艺参数下Fe3Al/18-8扩散焊接头的显微组织特征。

The microstructure feature in the diffusion - welded joint of Fe3Al / 18 - 8 was observed by means of scanning electron microscope ( SEM ) .

焊接工艺参数对A-TIG焊的焊缝成形影响

EfFect of welding parameter on weld form in A - TIG welding

梅钢150t转炉炉壳钢板焊接工艺研究

Welding procedure study of 150 t converter vessel for Meishan Steel Plant

文章介绍了STT半自动根焊+APW&Ⅱ自动焊的焊接工艺、施焊方法以及施工措施。

The paper introduces the welding process , welding method & construction measures .

通过一系列的焊接工艺试验，对输送H2S介质的服役管道焊接接头进行了全面的评价，最终确定了输送H2S介质压力管道维修的焊接工艺参数。

The comprehensive evaluation of welded joints in the transmission medium H2S service pipe was conducted through a series of welding experiments .

对T2紫铜与10钢电子束焊接工艺进行了初步的试验与研究。

In this paper , it introduces the preliminary experiment and study for the EB welding process of T2 copper / 10 steel .

薄板高强铝合金LY12CZ焊接工艺参数的优化

Parameters optimization for welding aluminum alloy 2024 sheet with high strength

对LF6铝合金的激光-电弧复合焊接工艺进行了初步研究。

The laser-arc hybrid welding technology for LF6 aluminum alloy was introduced .

研究了奥氏体不锈钢A-TIG焊和普通TIG焊在焊接工艺参数不同时对其焊缝成形的影响。

The effect of welding parameter on weld form in A - TIG and conventional TIG welding of austenitic stainless steel is studied .

变形镁合金AZ31B的激光焊接工艺研究

Study of YAG Laser welding process on wrought magnesium

研究了8090Al－Li合金的YAG激光焊，通过金相观察、显微硬度测定以及电子探针微区成分分析，结果表明：在一定的焊接工艺参数下，能得到优良的焊接接头。

Welded joints of Al-Li alloy welded by YAG laser are investigated through metalloscopy , micro-hardness and electron probe micro-analysis . The results showed that a suitable welded joint can be obtained under proper welding parameters .

采用Foxproforwindows（FPW）建立了焊接工艺规程数据库系统（WPSDBS）。

A data base system of welding procedures ( WPSDBS ) is created on the basis of FoxPro for Windows software .