斜轧

斜轧孔型接触区的数学分析对于进行正确的孔型设计非常重要，本文运用数学方法进行分析，得出了非常有意义的结论。

The meaningful conclusion is drawn through mathematical analysis of pass contact surface design in skew rolling .

本文论述了斜轧工具设计所应遵循的原则与三辊联合穿轧的孔型设计。

In this paper , the principles which should be adhered to when designing skew rolling tool and the pass design for three-roller combining piercing and rolling are discussed .

计算机辅助设计（CAD）图解斜轧穿孔孔型开度值

CAD Illustrative Method for Groove Opening Value of Rotary Piercing Mill

介绍了一种使用计算机辅助设计（CAD）图解斜轧穿孔孔型开度值的方法，解决了在生产中用数学方法求解斜轧孔型开度值较复杂，难以应用的问题。

Presented in the article is a CAD illustrative method for groove opening of rotary piercing mill , which is much simpler and easy-to-use than the mathematic method as used for the same purpose .

在此基础上开发了一个斜轧轧辊的零件信息系统，实现了在CAD/CAPP/CAM集成环境下，从CAD系统中直接提取零件信息，并转化为CAPP系统的工艺信息。

A extracting information system for the rollers was developed , directly from the CAD system then turned it into the CAPP system in the CAD / CAPP / CAM integrated circumstance .

Φ114mm二辊斜轧穿孔机后台定心辊的改进

Modification of outlet-table centering roll assembly of φ 114mm 2-high rotary piercer

依据Assel斜轧管工艺流程阐述了Assel轧制设备近年来的新改进。

It is elaborated what are improved to Assel tube rolling equipment in recent years .

高标准纯钛（Gr.2）斜轧穿孔管的冷加工技术

Cold Processing Technology of High-Specification Pure Titanium ( Gr.2 ) Cross-Rolled Boring Tube

发现圆坯三辊斜轧时的应变强度在轧件纵剖面上的分布形态与圆坯二辊斜轧极为相似，也呈W型。二、末日意识两个小偷（英文）

It is identified that the distribution pattern of strain strength on the rolled piece longitudinal section during three-hi cross-rolling process with round billet is very similar to that during two-hi cross-rolling process with round billet , i.e. both appear in a " W " pattern .

介绍了φ50mm二辊斜轧穿孔机组的改进设计方法，以及前台受料槽和后台活动小车制动机构、小车与顶杆连接方式的改进经验。

The writer introduces the design method used for modifying the φ 50mm 2-high piercing mill and experience with respect to improving of the mill 's inlet table feeding-trough , outlet table carriage braking-mechanism as well as type of linkage between the carriage and the plug .

介绍了山东烟台钢管总厂Φ114mm。二辊斜轧穿孔机后台定心辊的布置、定心辊的结构及其气缸行程调节结构和双行程气缸结构等的改进情况。

The introduction concerns the modification of the outlet-table centering roll assembly of the Φ 114mm 2-high rotary piercer located at Yantai Steel Tube Plant , Shangdong , involving such aspects as roll arrangement , roll pin structure , pneuma-cylinder stroke-setting mechanism and structure of the dual-stroke pneuma-cylinder system .

拉力芯棒钢管斜轧延伸机运动学分析

Kinematical analysis of a skew tube rolling elongator with stretched mandrel

钢管斜轧延伸螺旋轧制变形区的研讨

Research of Spiral Deformation Zone of Seamless Tube Cross Rolling Elongation

螺旋孔型斜轧的孔型畸变及其影响因素

Pass distortion and its underlying factors in helical pass oblique rolling

斜轧缺陷的漏磁检测

Magnetic leakage flux detection for rotary rolling-caused flaw in steel pipe

斜轧穿孔机孔型优化系统的研制

Development of Optimization System for the Pass of Cross Roll Piercer

斜轧管形零件的三维非线性有限元分析

Three-dimension nonlinear finite element analysis of skew rolling of tubular part

计算机辅助设计应用于斜轧健身器管孔型设计

Computer-aided design application in inclined rolling fitness pipe roll pass design

双头斜轧铝球的孔型设计

Pass design for two - groove skew rolling aluminum ball

螺旋斜轧轧件长径比对轧件非圆体积的影响

Effect of slenderness ration on non-column volume of workpiece in skew rolling

斜轧管材生产中内部组织有限元模拟和预测

Simulation and prediction of microstructure by FEM in cross piercing tube process

斜轧球类件轧辊的数控车削加工及误差分析

NC Machining of Roller of Skew Rolling and Error Analysis

斜轧穿孔顶头平整段锥角的选择

Determination of Smoothing Zone Conical Angle of Rotary Piercing Plug

斜轧时金属剪切变形的产生与确定

Generation and Determination of Shearing Strain of Metal during the Skew Rolling

斜轧管机速度和咬入条件的计算

Calculation of velocity and bite conditions regarding rotary pipe mill

斜轧表面变形的印象实验法初探

The Original Exploration of Impressing-Picture Method on Cross Rolling Surface

钢管斜轧过程应力应变与温度耦合模拟分析

Coupled analysis of stress - strain and temperature in cross rolling process

二辊斜轧穿孔时圆坯断面的变形分布和发展

The distribution of deformation in tube rounds during Mannesmann piercing

斜轧钢球辊形曲面分析研究

Analysis and research on curved surface of roller for rolling steel balls

应用这种方法可以对斜轧工艺参数进行调整，使其具有良好的内部质量。

Technological parameters can be adjusted to suitable microstructure by this way .