平面反射镜

自准检测法中平面反射镜的误差允许值

The permissible tolerance of the plane mirror in the autocollimating test

胶固紧平面反射镜的有限元分析

Finite element analysis of the plane mirror fastened by adhesive

椭圆光孔上的Fraunhofer衍射图样X光掠入射平面反射镜系统的制备

Fraunhofer Diffraction Diagram on an Ellipse Aperture Manufacturing Technology of an X-ray Grazing Mirror System

重力作用下平面反射镜变形研究

Study on the Surface Deformation of Flat Reflector Under Gravity Load

平面反射镜的引入提高了角度测量的分辨率。

A reflecting mirror is introduced for increasing the measurement resolution .

化学气相沉积碳化硅平面反射镜的高精度超光滑加工

High-precision and Super-smooth Fabrication of CVD SiC Flat Reflecting Mirror

轻质碳化硅平面反射镜超光滑表面加工

Supersmooth surfacing fabrication for lightweight silicon carbide plan mirror

X光掠入射平面反射镜系统的制备

Manufacturing Technology of an X-ray Grazing Mirror System

双平行平面反射镜在激光二极管阵列光束整形中的应用

Study of the Beam Shaping of Laser Diode Arrays Using Two Parallel Plane Mirrors

反应烧结碳化硅平面反射镜的光学加工

Optical surfacing of flat reaction-burned silicon carbide mirror

谐振腔一端为平面反射镜，一端为金属栅网。

One end is a plane mirror , the other is a metal mesh .

大口径碳化硅平面反射镜的数控研磨与在线检测

Computer Controlled Grinding and On-line Testing of Large-aperture Planetary Silicon Carbide ( SiC ) Mirror

该方案只使用平面反射镜，对于运动部件的精度要求比较低，对倾斜、磨损等不敏感。

This method requires only plane mirrors , and it is immune to tilt , wearing etc.

剪切散斑的双平面反射镜法

The Bimirror Method for Speckle Shearing

五折镜是由五个平面反射镜按一定角度胶合而成的集成化小型光学组件。

The five-mirror reflector is an integration element cemented by five small reflectors with different angles .

根据正交摄影原理，在狭缝联动摄影外弹道测试基础系统中设计了一个平面反射镜装置。

A Reflective mirror apparatus has been used in Synchro - ballistic camera according to the principle of orthogonal photography .

文章阐述了一种由离轴抛物面反射镜和平面反射镜组成的红外平行光管，然后从两个方面对这种红外平行光管进行了详尽的分析。

A kind of infrared collimator which is made up of off-axis parabolic mirror and reflecting mirror is described in this paper .

在光源系统中采用球面聚光镜和平面反射镜，可大幅提高光源的利用率。

Adopting spherical mirror and plane mirror can notablely improve the utilization of the light source in the system of light source .

根据初级波面像差理论，推导了自准检测法中平面反射镜的误差允许值。

According to the first-order wave aberration theory , the permissible tolerances of the plane mirror in the autocollimating test have been derived .

这些干涉图被由小平面反射镜运动造成的参考光虚点光源的位移所调制。

The interferograms are modulated by the displacements of the virtual point sources of the reference beams due to motion of the small mirror .

对用预置狭缝法和带平面反射镜的预置狭缝法制作的彩虹全息图的视角问题作了详细的讨论。

The view angle of rainbow holograms which are recorded using a pre existent slit or a pre existent slit with mirrors is analyzed in detail .

利用光线组合和激光准直技术，基于两个五角棱镜、两个平面反射镜、两个光电探测器，建立了直线导轨运动副三维转角测量的系统模型。

The systemic model for measuring three-dimensional rotation angles of the linear guide track is established based on two pentaprisms , two mirrors and two photoelectric detectors .

在一定的照明条件下，它的再现光经过一个平面反射镜的反射返回到全息图，作为它的第二束照明光，这时能够再现出被加密的图像。

Under the specified lighting condition , its reconstructed light is reflected back by a mirror to illuminate the hologram again , and thus , another image is reconstructed .

分析了平面反射镜对聚焦声束的影响，首次建立了超声声束经平面反射镜反射后的聚焦超声场模型；

Emphasized on the influence of planar reflector on focusing beams , the model of immersion focusing ultrasonic field based on focusing beams reflected by planar reflector is given .

该方案的检测方法与经典的星点法、哈特曼法等以及干涉法相比较，原理新颖，也不需任何外部信标或标准大平面反射镜提供工作参考基准。

Compared with Star Test , Hartmann and Interferometer etc , the testing method of this project needs no work reference benchmark given by beaconing or standard large plane mirror , and its principle is novelty .

以长焦距大视场投影光学系统为基准，通过激光器建立系统光轴，再依次对转向平面反射镜、分光棱镜、星图靶标进行装调。

With long focal length and large field projection optical system for collimating lens as a benchmark , the system generates optical axis , and then sequentially steers the plane mirror , prism , and star target alignment .

设计的光路系统用两个平面反射镜将一束扩展激光束分成两束参考光和一束物光，籍此记录物体变形下的可分离双参考光两次曝光全息图。

In the optical system designed , a spread beam is divided into the two reference beams and one object beam by two planar mirrors . Thus the double-exposure interferogram of the measured object under constant deformation can be recorded .

对光杠杆放大系统中平面反射镜、望远镜和竖尺的相对位置不正而引起系统误差进行了分析、比较、归纳，并得出结论，提出正确放置的方法。

This paper studies , by means of analysis , comparison and induction , the systematic differentials caused by the mal-position of reflective plane mirror and vertical ruler in light-lever magnifying system . An approach to correct positioning is further proposed .

根据波前径向斜率测量原理，提出一种利用五棱镜扫描方法实现了新型自基准哈特曼波前传感器，其突出优点和特点是毋需任何外部信标或标准大平面反射镜提供工作基准。

A novel self-referenced Hartmann wavefront sensor using pentaprism scanning method is proposed based on radial slope wavefront measuring principle . Its outstanding advantages and characteristics lie in un-necessity of any outside beacons or standard big flat mirror as operating reference .

着重讨论了用于模拟目标能量的光衰减器和实现平面反射镜二维转动的闭环伺服系统的设计方案，并对其主要性能参数的确定做了技术探讨。

Emphatically discuss the design schema of Light Attenuator of imitating energy and Closed servo-control of realizing the mirror reflector to turn to move in space , and make the sciential analysis about the definition of the main function parameter value .