嵌入式计算机

设计完成嵌入式计算机与PLC之间的通信控制系统。

Designing communication and control system between embedded computer and PLC .

基于ARM的PC/104嵌入式计算机设计

The Design of PC / 104 Embedded Computer Based on ARM Processor

新一代FPGA在星载嵌入式计算机中的应用

The Application of the Latest FPGA Series in On-Board Embedded Computer

基于嵌入式计算机和DSP的数控系统及其通信实现

A CNC System Based on Embedded Computer and DSP and Their Communication Design

基于嵌入式计算机和Ethernet的分布式波控系统

Distributed Beam Steering System Based on Embedded Computer and Ethernet

完成了基于PC／104总线的控制保护器的硬件设计，主要包括嵌入式计算机和数据采集板的选型以及信号调理电路的设计。

The data acquisition board and its signal condition circuits , is completed in this project .

利用嵌入式计算机实现污水COD在线监测

Realize Inspection on Sewerage by Using Inlaid Computer

LS系列嵌入式计算机汇编程序的一体化研究

The Study on Integrating Assemblers of LS Series Embedded Computers

基于嵌入式计算机和MEMS传感器技术，构建了一个小巧的低成本飞行控制系统；

A low-cost and low-weight flight control system is developed based on embedded computing technology and MEMS sensors .

所作的工作主要包括：（1）嵌入式计算机模块的选型，GPRS、GPS接收模块的选型、其他外设的选型。

The main works include : ( 1 ) Selection of embedded PC , GPRS , GPS modules and other peripheral equipments .

最后介绍了软件的移植过程并对裁减后的Linux系统以及该软件在嵌入式计算机上进行了功能测试。

At last introduce the process of software transplanting , and make a function test for customizing Linux system and RSS in embedded computer .

本文结合基于ARM处理器的PC/104总线嵌入式计算机的开发过程，对嵌入式系统研究中的关键技术进行了研究。

In the process of design PC / 104 embedded computer based on ARM , we go deep into the key technique of embedded system .

远程多参数监护终端是整个系统的核心，它主要由多参数监护模块，嵌入式计算机系统，GPRS无线模块构成。

Monitor terminal which consists of embedded computer and GPRS module is the core module of the whole system .

分析了其在星载嵌入式计算机中央处理器（CPU）结构设计中的应用，并给出了设计过程。

The application of FPGA in the CPU design of on-board embedded computer was analysed , and the design processing was given .

该文研究了基于嵌入式计算机的远程多参数监护系统，该监护系统主要由远程多参数监护终端，Internet和GPRS网络，医院监护中心服务器组成。

A tele-monitoring system based on embedded computer is presented , which consists of multipurpose monitoring module , Internet , GPRS network and center server in hospital .

通过32位的ARM微控制器、FLASHROM、SDRAM等外围芯片和有关硬件接口构成监控终端的嵌入式计算机硬件平台。

The monitoring terminal is embedded system consists of32bit ARM micro-controller , FLASH ROM , SDRAM , other periphery chip and hardware interface .

另外，还研制一块基于嵌入式计算机系统RS232串口的调制解调器。

In addition , manufacture a modem based on PC104 bus embedded computer system 's RS232 serial port .

随着计算机与测绘技术的飞速发展，基于嵌入式计算机、无线网络技术及GPS定位技术的移动地理信息数据采集系统已趋于成熟。

With the fast development of the computer and Survey technology , the Mobile GIS data collection system based on embedded computer , wireless network and GPS positioning technology has been matured .

基于X86平台的嵌入式计算机得到了广泛应用。

Embedded computer based on X86 platform has been widely applied to many fields .

基于PC104嵌入式计算机的红外信号模拟器设计

The Design of IR Signal Emulator Based on Embedded PC 104

论文着重分析与研究在嵌入式计算机中USB主机控制器的硬件设计、板级支持包BSP中对USB的底层支持和USB主机控制器在操作系统WINDOWSCE下的驱动。

The thesis ' gives prominence to analysis and research USB host controller in embedded computer , including hardware design , the support of BSP and related driver in Windows CE .

本文以星载并行嵌入式计算机系统为背景，阐述其并行嵌入式操作系统PEMS（ParallelEmbeddedMultiprocessingSystem）中关键技术研究与实现。

In this article , we introduce the design and implementation of key technologies in PEMS ( Parallel Embedded Multiprocessing System ), which is the operating system of the satellite-carried parallel computer system .

本文介绍了采用ETX标准的ETX嵌入式计算机的特点。

This paper introduces the characteristics of ETX Embedded computer with ETX specification .

本课题研究开发了基于DSP的SVC（动态静止型无功补偿）控制系统，是嵌入式计算机技术与电力电子技术结合的一个实例。

This topic research and develop SVC ( Static Var Compensator ) control system based on DSP , was the embeded system computer technology and electric power electronic technology integrate example .

在原理设计阶段介绍了CPLD、电子盘、CAN通信等技术在军用嵌入式计算机中的具体应用。

In the principle phase of the design , It introduces the some technology used in military embedded computer , such as the CPLD , electronic disc and CAN communication .

嵌入式计算机PC-104在飞行控制系统中的应用

An Application of Embedded Computer PC-104 in Flight Control System

以基于嵌入式计算机PC-104的天线控制系统为例，从软件架构、内存操作、人机接口、性能优化等多方面阐述C语言嵌入式系统的编程技巧。

Taking antenna control system based on embedded computer PC-104 for example , are introduced , including software architecture , memory operation , HMI , performance optimization , etc.

由于脱水机的控制系统中采用的嵌入式计算机的操作系统为DOS操作系统，为了将编制好的软件写入嵌入式计算机，采用Turboc来编程实现用户界面。

Because the operating system of the embedded computer is DOS operating system , we use Turbo C to program the user interface so that we can write the source program into the embedded computer .

ETX嵌入式计算机在测试中的应用

Application of ETX Embedded Computer In Test

采用高可靠性的二业PC104嵌入式计算机作为系统的测试主机。

We introduced highly reliable industrial embedded computer PC 104 as the testing system 's main computer .