塑料电镀

塑料电镀粗化液中硫酸根的测定

Determination of Sulfate in plastic plating Roughing Solution

塑料电镀：一个充满挑战与机遇的领域

Plating on Plastics : A Field Full of Challenges and Opportunities

ABS塑料电镀的高锰酸钾前处理工艺

Pretreatment for Electroplating of ABS Plastics by Potassium Hypermanganate

ABS塑料电镀的低温无铬粗化

Low Temperature Roughening of ABS Plastics With Chromic Acid Free Solution for Electroplating

ABS塑料电镀粗化溶液分析

Analysis of roughening solution for ABS plastics electroplating

ABS全自动塑料电镀生产线三维设计及关键结构优化研究

Three-dimensional Design and Study of Optimization on Key Structures for ABS Automatic Plastics Electroplating Line

90%以上的ABS塑料电镀件都是用于卫浴或汽车工业，并且分别有各自的要求。

More than 90 % of plated ABS-based material is used either in the sanitary industry or in the automotive industry .

准确掌握ABS塑料电镀粗化溶液中各成分的含量有利于粗化槽液的调整与维护，而传统的分析方法耗用时间长、准确度差。

Accurate control each component content in the roughening solution of ABS plastics electroplating contributes to adjust and maintain the roughening solution , and the traditional analytical method has disadvantages of long time and low accuracy .

影响塑料电镀的塑料工艺因素分析

Analysis of the effect of plastics technology factors on plastics electroplating

并且综述了塑料电镀技术在各方面的应用及其现状。

It relies on the use of conductive macromolecule polymer materials ;

如何提高塑料电镀的合格率

Methods of Improving the Rate of Qualified Products in Electroplating on Plastics

汽车塑料电镀手柄起泡原因探讨

The discussion about the bubbing of automobile galvanized plastic handles

提高塑料电镀质量的认识

Opinions of quality improvement on plastics electroplating

塑料电镀胶体钯活化工艺的研究现状

Colloid-Pd Activation Technologies for Plating on Plastics

塑料电镀的活化工艺

Activation Process for Plating on Plastics

由于其它表面处理技术的竞争，塑料电镀的发展受到挑战。

The development of plating on plastics is being challenged by the competitions of other surface treatment technologies .

对塑料电镀前处理传统工艺进行了改进，把塑料表面的敏化、活化合为一步进行。

An innovative technique for the electroplating on plastics which combines the sensitizing and activating steps into one has been developed .

概述了汽车塑料电镀标牌、磁控溅射镀膜标牌及烫印标牌工艺方法的原理、优缺点及应用范围。

The principle , characteristics and application of plastic electroplating mark , magnetic-controlled splash filming mark and branding mark are introduced .

塑料电镀应用广泛，为提高塑料电镀的合格率，论述了如何提高塑料电镀的工艺流程。

Electroplating on plastics has been extensively adopted . The purpose of the article was to improve the qualified rate of electroplating on plastics .

塑料电镀工艺过程中，粗化液中硫酸根的测定，通常按镀铬液中硫酸根的测定方法进行，但是比较麻烦，重现性也差。

In the process of plastic , plating the determination of sulfate in roughing solution is generally carried out by the method used in Cr-plating .

化学镀铜技术主要用作印制线路板孔金属化和塑料电镀，其镀层具有良好的延展性、导热性和导电性。

Electroless copper plating is mainly applied to the metallization for PCB and electroplating on plastics , and copper electroless deposits have good ductibility , heat conductivility and electrical conductibility .

ABS塑料局部电镀&电解屏蔽法

Local Plating of ABS Plastic with Electrolytic Shield

ABS塑料与电镀层结合力差的原因分析及其控制

Causes for poor adhesion strength of electroplated coating to ABS plastic and their controls

ABS塑料直接电镀过程省略了化学镀，是塑料电镀史上的重大突破。

It is well known that direct copper plating on ABS plastics has found widely industrial application for eliminating electroless plating .

改性聚苯乙烯塑料件电镀仿金工艺

Gold imitation electroplating process on modified polystyrene plastics

GB/T12610-1990塑料上电镀层热循环试验

Electroplated coatings on plastics materials-Thermal cycling test

我厂是专业从事五金、塑料、电镀等制品表面激光标识的厂家。

The company pursues the laser label in the surface of hardware , plastic , electroplate and so on .

介绍了亚氨基二乙酸的二种合成方法及其在农药、塑料、电镀、摄影、洗涤剂、金属络合剂等方面的应用。

The paper introduces two synthesis methods of iminodiacetic acid and its applications in many aspects such as pesticide , plastic , electroplating , photographing , detersive and metal complexants .

将所制得的盐基胶体钯应用到PCB化学镀铜和ABS塑料装饰性电镀铜中，获得性能优异的镀层。

The plating layer of nice quality was acquired when the salt-based colloid palladium had been used in activation step in the electroless copper plating on PCB and decorative copper plating on ABS plastic .

还有一种是对胶体钯这种相当古老的工艺进行改进，能够在塑料上直接电镀，而无须经化学镀金属工序的方法。

A modification of this quite old process is even able to do a direct plating without making use of an electro-less metal depositing step .