喷镀

符合器件要求的CdTe薄膜有多种廉价淀积方法，包括近距离升华、元素联合蒸汽淀积、电沉积、丝网印刷和喷镀等。

Several low-cost techniques , including close-spaced sublimation , combination of elemental vapors , electro-deposition , screen printing , and spraying have been developed for the deposition of device-quality CdTe films .

喷镀之前，表面上应当没有油脂、氧化皮、锈斑、湿气或其它杂物。

Immediately before spraying it should be free from grease , scale , rust , moisture or other foreign matter .

本文主要采用超声喷镀法在玻璃衬底上制备了N-Al共掺的p型ZnO薄膜。

P-type ZnO thin films were synthesized by ultrasonic spray pyrolysis .

RP和电弧喷镀相结合的快速制模技术

Rapid molding Technique through RP Combined with Electric Arc Jet Coating

喷镀法制备SnO2膜导电玻璃的研究

Study on conductive glass with SnO_2 film by spray method

喷镀热解制备SnO2：F透明导电热反射膜

The Preparation of Pyrolytic Sprayed SnO_2 : F Transparent Conducting and Heat Reflecting Films

爆炸喷镀Co-Cr-W合金层经电子束熔化基体自冷凝后的微观分析

Micro-Analyses of the Detonation Sprayed Co-Cr-W Coatings Melted by Electron Beam and Self-Solidification

本文研究了爆炸喷镀Co-Cr-w合金层经电子束熔化基体自冷凝的显微组织、结构及成分。

Electron beam melting process of detonation sprayed Co-Cr-W coating has been studied .

利用喷射电镀试验系统，使用watts镀液在直流和脉冲电源的作用下在基材表面上喷镀纳米晶镍镀层，再采用激光扫描喷镀层以获得激光重熔喷射纳米晶镍镀层。

Deposited the nanocrystalline nickel coating on the base metal by jet electroforming system , direct and pulse supply , and watts deposition liquid , then laser remelted the coating , got the laser remelted nanocrystalline nickel coating by jet electroforming .

介绍了为满足微电子新颖封装&圆片级封装（WLP）在硅圆片上制作凸焊点的需要，根据有限元分析模拟优化，设计研制了FEP-1垂直喷镀机。

This paper introduces the design and usage of FEP - 1 vertical fountain plating , which is met to fabricate bumps on wafers in wafer level package . Computational simulation and optimization by finite - element analysis ( FEA ) were used in designing vertical fountain plating .

喷雾法制备活塞环用MP43喷镀合金钼粉

The preparation of spraying alloy molybdenum powder by spray drying method

高稳定性电热膜喷镀装置自动控制系统

The Automatic Control System for Electrothermic Membrane Gas - Plating Device

介绍了对电热膜喷镀装置的改进设计。

Introduce the further improvement design for the electric heating film-plating device .

铜及铜合金基材上打底层的热喷镀技术

Thermo Spray Technology of Undercoat upon Cu and Cu-alloy Workpieces

硬质合金喷镀粉物理性能的改善

Improvement of Physical Properties of Cemented Carbide Sprayed Powder

金属喷镀法快速制作金属模具方法研究

A Study on the Methodology of Rapid Manufacturing Metal Die by Metal Plating

金属喷镀-有机涂料喷涂在B型机构箱上的应用

Metal Jet Plating-the Application of Organic Coatings Jet Plating on B-mode Machinery Box

喷镀新工艺的研究

Research on the New Technology for Spray Plating

制作圆片级封装凸焊点的垂直喷镀机研制

The Research and Development of Vertical Fountain Plating for Making Bumps in Wafer Level Package

掺杂钨绞丝再结晶行为对真空喷镀用绞丝螺圈寿命的影响

The effect of recrystallization behavior of doped w stranded wire on service life of metallized coils

涂胶复膜喷镀法制样在大型构件现场无损金相检验中的应用研究

Research on the application of gel-coating film spraying in field non-destructive metallographic insection of bulk structural parts

电弧喷镀、气喷镀和高频喷镀作为拖拉机汽车磨损零件修复方法的比较研究

Comparison of arc - , gas - , and INDUCTION-METALLIZING as methods to reclaim tractor and automobile worn parts

继而将载有Ca2+细胞化学薄片喷镀碳膜，进行能量色散谱分析。

The lamina with Ca2 + cytochemistry was plated with lemma of carbon , and was analyzed by chiomatic aberration of capacity .

本文探讨了烧结温度及其他加工工艺对硬质合金喷镀粉物理性能的影响。

The paper describes the study of influence of sintering temperature and other processing technologies on the physical properties of the cemented carbide sprayed powder .

结果表明，采用新的工艺能使硬质合金喷镀粉的物理性能完全达到国外用户的要求。

The results showed that the use of the new technology can assure the physical properties of the cemented carbide sprayed powder up to the foreign clients requirement .

本文应用功能反求分析原理对管状电热膜元件在工业化热喷镀过程中的传输方式进行了反求工程设计。

By applying the principle of functional inverse seeking analysis this paper carried out the inverse seeking engineering design of way of transmission in the process of industrialized heat plating for tubular electrothermal membrane element .

系统地介绍了金属喷镀快速制作模具的原理、方法与控制喷镀质量的措施，以及金属喷镀模具的结构及制作过程。

The paper gives a survey of the principle and methodology of rapid manufacturing dies by metal plating and the ways of controlling plating quality as well as metal plating die structure and its manufacturing process .

使用这种电极，无须在试样上粘贴或喷镀电极，因而也可用于研究带电的或经其它过程处理的有机薄膜的介电性能。

As there are no electrodes attached to the test specimen , the electrode system designed can also be used to study dielectric properties of polymeric films which have been charged or impregnated with oil or other liquids .

硬质合金喷镀粉是一种新型硬面材料，主要应用于各种发动机、往复轴、大型风机叶片及密封圈等抗高温、耐磨损元件上，对物理性能的要求特别严格。

Cemented carbide sprayed powder is a new hard material , mainly used for high temperature resistant and wear resistant parts in various motors , shafts , large fan vanes and seal rings , etc , with extremely strict requirement for its physical properties .