冷轧

用Ks计算法设计冷轧管孔型变形段中各管坯壁厚

Designing tube wall thickness in forming section of groove for cold rolling tube by K_s calculation method

冷轧机液压AGC神经网络自适应PID控制的研究

Study on Neural Network Adaptive PID Control of Hydraulic AGC System Cold Rolling Mill

冷轧环机三维CAD模型和优化设计研究

The 3D CAD Model of Cold Ring-rolling Mill and Optimization

基于SqlServer的可逆冷轧机轧制数据的管理与实现

Management and Realization of Rolling Data for Cold Reversible Rolling Mill Based on SQL Server

冷轧态SiCp/LY12复合材料超塑性及变形机制

Superplasticity and Deformation Mechanisms of a Cold-rolled SiC_p / LY12 Composite

微量Ti对冷轧无取向硅钢片磁性的影响

Effect of trace amount of titanium on the magnetism of cold rolled nonoriented silicon steel sheet

基于OpenGL的冷轧轧制过程可视化仿真

Visual Simulation of Cold Rolling Process Based on OpenGL

采用ICPAES法测定冷轧钢板表面涂覆的硅量。

An ICP-AES method for determination of surface silicon on cold-rolled steel plates was introduced .

用SEM、TEM及XRD等方法研究了共析钢中珠光体经40%-90%的冷轧变形后所产生的显徽组织变化。

The microstructure changes of pearlitic eutectoid steel induced by cold rolling were investigated by using SEM , TEM and XRD etc.

冷轧钢板HAZ组织性能对轮辋折纹缺陷的影响

Effects of HAZ microstructure of cold rolled steel sheets on line defect

含Sc和Zr的2618铝合金冷轧板材退火时组织性能的变化

Microstructure and Hardness Changes of Cold rolled 2618 Alloy Plate with Trace Sc and Zr Addition during Annealing

攀钢冷轧厂HC轧机板形控制优化

Strip shape control and optimization of HC mill of Panzhihua Iron and Steel ( Group ) Company

通过对LD&60型冷轧管机的现场测试以及实验数据分析，说明了LD型冷轧管机有它自己的变形特点。

Measurements and experimental investigations in the LD-60 type cold pilgrim mill showed that deformation of this mill has it 's own characteristics .

六辊CVC冷轧机板形控制性能研究

Study of Flatness Control on 6-h CVC Mill

基于Fuzzy-PI方法的可逆式冷轧机液压压下系统的控制

Control of reversible cold mill hydraulic screw down system based on Fuzzy-PI method

利用控轧提高Si-Mn弹簧钢的冷轧性能

Improvement of cold-rolling property of Si-Mn spring steel through controlled hot rolling

介绍PLC控制系统在欠氧燃烧状态下冷轧镀锌薄板加热炉的双交叉限幅控制方式中应用，给出了控制框图、交叉限幅计算公式及实际使用效果。

This article describes , application of PLC control system in double crossing limit range control mode of cold mill galvanization sheet metal heating furnace in burning status of lack of oxygen .

Ti-IF钢冷轧板罩式退火工艺研究

Study on Batch Annealing Process of Ti-IF Steel Cold Rolled Sheet

用晶体取向分布函数（ODF）研究了Zr－4合金冷轧板的退火织构。

The annealing texture of Zr-4 alloy cold rolling plate is studied with the crystal orientation distribution function ( ODF ) .

对比研究了B对添加Ti和复合添加Ti、Nb的冷轧IF钢板的显微组织和疲劳性能的影响。

Effect of boron on fatigue properties of cold rolled Ti bearing and Ti Nb bearing IF sheet steels was investigated through annealing microstructure examination , fatigue tests and fracture surface analysis .

以Ti、Al元素粉末为原料，通过冷轧成形和两阶段反应合成法，制备出孔隙度为38.3%～48.2%的Ti46.5%Al（摩尔分数）金属间化合物过滤材料。

Ti-46.5 % Al ( mole fraction ) intermetallic compound filter materials with overall porosity of 38.3 % ( 48.2 % ) were fabricated through elemental powder cold roll forming and reactive synthesis .

仿真实验表明，该控制器的控制性能远优于常规的PID控制器，为冷轧带钢厚度精度的提高提供了一种新的尝试。

The simulation experiments results demonstrate that the control performance of the controller is better then that of conventional PID-type controller . This is a new method to promote further improvement of thickness accuracy .

将重复控制技术应用于UPS逆变电源，构成了一种高性能、低成本的波形控制系统.海湾地区第一座不锈钢冷轧厂低成本生产优质不锈钢冷轧产品

Repetitive control is synthesized in a UPS for forming a cost effective waveform control system . COST EFFECTIVE QUALITY FOR THE GULF REGION 'S FIRST STAINLESS COLD ROLLING PLANT

研究了工艺参数对含（0.062～0.075）Nb，（0.025～0.028）Ti冷轧薄板性能的影响。

The effects of the process parameters on the mechanical properties of cold-rolled sheets containing 0.06 % ~ 0.075 % Nb and 0.025 % ~ 0.028 % Ti are studied .

介绍了鞍钢新轧钢公司冷轧厂连轧机厚度自动控制系统（AGC）概况。

This paper introduces the general situation of thickness automatic control system for the continuous rolling mill in Cold Rolling Plant of Angang New Steel Co. , Ltd.

就铝含量和冷轧变形量对电磁纯铁冷轧板矫顽力（Hc）的影响结合生产实际进行了研究并在生产实践中取得较好效果。

Researches about effect of aluminium content and cold rolling reduction on magnetic iron cold-rolled sheets are developed , and applied in production with active results .

冷轧Fe-Mn-Si合金的形状记忆效应与淬火温度的关系

Effect of quenching temperature on shapes memory effect ( sme ) of cold rolled Fe-Mn-Si alloys

本文介绍了3.25%硅钢冷轧生产中的MIG焊接和TIG焊接接头的脆性问题。

One of the main problems encountered during the production of cold-rolled 3.25 % silicon steel was the embrittlement of MIG and TIG weld joints .

武钢第二炼钢厂使用RH-KTB设备主要生产w（C）很低（w（C）≤15×10-6）的冷轧薄板钢。

The ultra-low carbon ( w ( C )≤ 15 × 10 ~ ( - 6 )) cold rolled strip is mainly produced with RH-KTB in No. 2 Steelmaking Plant of Wuhan Steel .

对武钢冷轧厂冷连轧机和HC轧机支承辊剥落特征的研究表明，冷连轧机支承辊剥落类型有深层次剥落和辊面型剥落两种；

An investigation is made of flake off features on back up roll of both tandem mill and HC mill in the Cold Strip Rolling Mill Plant .