内热源

  • 网络heat source;inner heat source
内热源内热源
  1. 无损辨识时间依赖型内热源的MonteCarlo方法

    Noninvasive identification of time-dependent heat source by the Monte Carlo method

  2. SiC合成炉具有平面瞬态具有内热源温度场的特点,取任一垂直于炉长方向的平面进行分析,研究多热源炉传热传质规律。

    The temperature field of SiC synthesis furnace is two-dimensional , transient , and of inner heat source , so random a plane vertical to lengthwise direction can represent the whole furnace .

  3. 关于{x/n}的分布内热源影响下的均质组织表面温度分布研究

    Study on the Surface Temperature Distribution of the Isotropy Tissue Affected by the Inner Heat Source

  4. 碳化硅合成炉具有平面非稳态有内热源的温度场特点,利用ANSYS软件对多热源炉进行温度场数值计算。

    The thermal field of SiC synthesis furnace is plane , instantaneous and of inner thermal source . In the paper the temperature field of multi-heat-source furnace was simulated with the software ANSYS .

  5. 本文首次应用有内热源的多孔介质中流体流动与换热理论,对直接甲醇燃料电池中PEM中的传热过程和干涸现象进行定量研究。

    Based on the theory of fluid flow and heat transfer in porous media with inner heat source , the phenomenon of membrane dryout in DMFC is studied quantitatively .

  6. 借助带内热源的饱和多孔介质能量双方程模型和Brinkman-ForchheimerExtendedDarcy模型以及k-ε紊流模型,对该太阳能温室系统的传热与流动特性进行预测。

    Based on Brinkman-Forchheimer Extended Darcy model and energy two-equation model with internal heat source for saturated porous medium , k - ε turbulent model , the flow and heat transfer characteristics of solar greenhouse system are simulated .

  7. 机敏混凝土内热源红外检测及其机理研究

    Study on Infrared Testing with Internal Heat Generation for Smart Concrete

  8. 机床内热源强度矩阵计算

    Matrix Calculation for Strength of Internal Heat Source in Machine Tool

  9. 北京住宅房间内热源逐时发热状况的调查分析

    Investigation of hourly emission status of internal heat sources in Beijing residences

  10. 竖直圆柱空间多孔介质中内热源引起的自然对流

    Natural convection due to internal heat generation in a vertical porous cylinder

  11. 含内热源多孔介质中的混合对流

    Mixed convection in porous media with internal heat sources

  12. 激光介质的多次吸收不均匀内热源模型

    Re-absorption non - uniform heat source for laser slab

  13. 探讨了在圆管内含内热源相变介质的一维凝固问题。

    One-dimensional solidification in a pipe with uniform volumetric energy generation was examined analytically .

  14. 深部矿井内热源分析

    Analysis of Heat Source in Deep Mine

  15. 焦耳内热源温度场求解的分离变量法

    Solution of Temperature Field with Internal Joule Heat Generation by Method of Separation of Variables

  16. 设备内热源的红外无损辨识研究

    Study on Nondestructive Identification of Heat Source

  17. 封闭空间内热源的温度场模拟实验研究

    The simulative experiment research of temperature field about the hot source in the close space

  18. 有内热源溶池内的气液两相流流动与传热

    The Gas-Liquid Two Phase Flow and Heat Transfer in the Pool with Internal Heat Sources

  19. 非均匀内热源圆筒壁稳态导热微分方程的热流分流和叠加

    Heat-Flow Distribution and Superimposing in Steady Heat-Conduction Differential Equations of Cylindrical Wall with Nonuniform Generation

  20. 本文用分离变量法求解了两维复合介质里无内热源的热传导问题。

    Separation of variables is used to solve homogeneous heat transfer problems in two-dimensional composite media .

  21. 建筑结构对带内热源工业厂房自然通风影响的数值研究

    Numerical simulation of effect of building structure on natural ventilation in industrial workshops with heat sources

  22. 埋地换热器内热源理论与地源热泵运行特性研究

    Study on Inner Heat Source of Underground Heat Exchanger and the Ground Coupled Heat Pump 's Performance

  23. 含内热源球壳的复合传热特性及其表面温度均匀性研究

    Study on Combined Heat Transfer Characteristic and Surface Temperature Uniformity of a Spherical Shell with Heat Generation

  24. 在温度场计算中,对内热源的分配和边界条件的处理进行了深入研究。

    Contribution of inner heat sources and treatment of boundary conditions in the calculation are analyzed thoroughly .

  25. 利用一种温度叠加的方法,对多热源炉内热源共同作用的区域的温度进行叠加计算,得出叠加后的温度分布方程。

    Utilizing a temperature superposition method , the temperature of area affected by multi thermal source is obtained .

  26. 有定常内热源的圆筒内外同时冷却时的热应力

    The Thermal Stress of a Hollow Cylinder with Bulk Stationary Heat Source under Cooling both Inside and Outside

  27. 研究了在焦耳内热源条件下,无缺陷结构稳态热传导问题,并获得了其解析的求解方法。

    The analytical solution of steady-state temperature field with internal Joule heat generation for sound structure is firstly investigated .

  28. 讨论了感应炉的感应加热作为传热方程的内热源以及感应电流的集肤效应对数值计算的影响。

    The influences of internal heat source , collecting surface effect of induction flux on numerical simulation were discussed .

  29. 提出内热源型埋地换热器理论模型,建立换热器周围土壤热湿传递物理数学模型。

    To perfect heat-transfer model for ground heat exchanger is one of key problems about GSHP popularization and application .

  30. 假定无限介质内热源的存在引起周围多孔介质内温度的瞬态变化和水分的迁移和扩散。

    A transient state distribution of temperature within the infinite medium is assumed to induce the moisture transfer process .